• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1999년도 추계학술발표회
• /
• pp.87-89
• /
• 1999

본 연구에서는 Sorfactant/Cosolvent 혼합용액을 적용한 Soil flushing 기법에 의해 농약(Endosulfan(6,7,8,9,10,10-Hexachlor-1,5,5a,6,9,9a-hexahydro-6,9-methane-2,3,4benzo (e)dioxathiepin-3-oxide))으로 오염된 토양의 정화효율을 알아보았으며, 회분식 및 연속식 실험을 통하여 최적의 운전조건을 도출하고자 하였다. 세척용액의 적정 사용조건을 알아보기 위한 회분식 실험은 Jar tester를 사용하여 진탕비 (토양 중량 : 세척용액 부피), Surfactant(SDS ＋ POE$_{5}$, POE$_{9}$ ＋ POE$_{14}$, POE$_{5}$ ＋ POE$_{14}$, POE$_{14}$)와 보조용매(water, ethanol, methanol, ethanol＋methanol)의 혼합비 및 농도 조건을 변화시켜가며 토양세척을 수행하였다. 세척용액은 보조용매에 Surfactant의 농도를 0.5%, 1%로 용해하여 적용하였다. 연속식 실험은 회분식 실험에서 얻어진 최적 세척용액 사용조건 즉, 계면활성제 SDS + POE$_{5}$(1:1, 용액농도 1%), 보조용매 ethanol을 일정 비율로 혼합한 세척용액을 오염된 토양이 충진된 유리칼럼에 여러 유량조건에서 1 - 20 pore volume까지 통과시켜 각 통과된 pore volume에서의 토양세척 효율을 알아보았다. 본 실험조건에서 얻어진 세척용액의 최적 통과 속도는 0.31 ㎤$cm^{-2}$$min^{-1}$ 이었으며, 세척온도의 증가에 따른 세척효율의 향상은 2$0^{\circ}C$이상에서 크게 둔화되었다. 또한 보조용매의 사용량을 줄이기 위해 에탄올을 물로 1:3까지 희석한 결과 세척효율에 큰 영향이 없음을 알 수 있었다.

• 한국농공학회논문집
• /
• 제50권5호
• /
• pp.39-50
• /
• 2008

This study are decided the mix proportion method of latex modified concrete for agricultural concrete structures from the results of workability and strength test with mix proportion factor. For mix proportion factor, this study are selected the water-cement ratio, unit cement amount and latex content. Also, this study were performed the slump, compressive strength test and microstructure analysis using the scanning electron microscope(SEM). The strength and slump of LMC are dependent with unit cement amount, latex content, and water-cement ratio. Especially, the strength of LMC are not controlled by single mix proportion factor but effected by combined mix proportion factor. Microstructure investigation are showed the LMC are reduced the internal pore volume and enhanced the transition zone between cement paste and aggregate interface. This effect get by consist of latex films in the concrete. Also, this study were recommended the mix proportion method for LMC. These mix proportions method are estimated the mix design for satisfied the target performance which are applied the agricultural concrete structure.

• 공업화학
• /
• 제31권5호
• /
• pp.495-501
• /
• 2020

In this study, zirconium fumarate of metal-organic framework (MOF-801) was solvothermally synthesized at 130 ℃ and characterized through powder X-ray diffraction (PXRD) analyses and porosity measurements from N₂ sorption isotherms at 77 K. The ability of MOF-801 to act as an adsorbent for the phosphate removal from aqueous solutions at 25 ℃ was investigated. The phosphate removal efficiency (PRE) obtained by 0.05 g/L adsorbent dose at an initial phosphate concentration of 60 ppm after 3 h was 72.47%, whereas at 5 and 20 ppm, the PRE was determined to be 100% and 89.88%, respectively, after 30 min for the same adsorbent dose. Brunauer-Emmett-Teller (BET) surface area and pore volume of the bare MOF-801 sample were 478.25 ㎡/g and 0.52 ㎤/g, respectively, whereas after phosphate adsorption (at an initial concentration of 60 ppm, 3 h), the BET surface area and pore volume were reduced to 331.66 ㎡/g and 0.39 ㎤/g, respectively. The experimental data of kinetic (measured at initial concentrations of 5, 20 and 60 ppm) and isotherm measurements followed the pseudo-second-order kinetic equation and the Freundlich isotherm model, respectively. This study demonstrates that MOF-801 is a promising material for the removal of phosphate from aqueous solutions.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2883-2888
• /
• 2013

To enhance the power conversion efficiency of dye-sensitized solar cell (DSSC), the surface of titanium dioxide ($TiO_2$) photoelectrode was modified by hydroxylation treatment with $NH_4OH$ solution at $70^{\circ}C$ for 6 h. The $NH_4OH$ solutions of various concentrations were used to introduce the hydroxyl groups on $TiO_2$ surface. As the concentration of $NH_4OH$ was increased, the short-circuit current density ($J_{SC}$) value and conversion efficiency of solar cells were increased because the amount of adsorbed dye molecules on $TiO_2$ surface was increased. As a result of the surface modification to introduce hydroxyl groups, the concentration of adsorbed dye on the $TiO_2$ surface could be improved up to 32.61% without the changes of morphology, surface area and pore volume of particles. The morphology, the specific surface area, the pore volume and the chemical states of $TiO_2$ surface were characterized by using FE-SEM, $N_2$ adsorption-desorption isotherms and XPS measurements. The amount of adsorbed dye and the performance of fabricated cells were analyzed by using UV-Vis absorption spectroscopy and solar simulator.

• 한국수소및신에너지학회논문집
• /
• 제22권5호
• /
• pp.585-591
• /
• 2011

This study has focused on the development of high performance membrane-electrode assemblies (MEAs) fabricated by decal method for proton exchange membrane fuel cell (PEMFC). To study the effect of ionomer contents on performance, we fabricated MEAs with several electrodes which were prepared by varying the quantity of ionomer from 20 wt.% to 45 wt.% in catalyst layer. The MEA performance was obtained through single cell test. The MEA prepared from electrode with 25wt.% of ionomer showed the best performance. We evaluated the surface area and pore volume of electrode with BET. We found that the surface area and pore volume in electrode decreased rapidly at the electrode with 40wt.% of ionomer in catalyst layer. MEA was fabricated by roll laminator machine and the roll laminating conditions for the preparation of MEA, such as laminating press, temperature and speed, were optimized. The MEA performance is not affected by laminating temperature and speed, but roll laminating press have a great effect on MEA performance.

• 한국대기환경학회지
• /
• 제32권2호
• /
• pp.176-183
• /
• 2016

Activated carbon fibers (ACFs) for $CO_2$ adsorption were prepared from polyacrylonitrile (PAN) fiber through the systematic processes such as oxidation, activation and amination with the focus on the formation of nitration functional groups. Textural analysis of test samples revealed the decrease of specific surface area and pore volume by chemical activation including amination. The ratio of micropores to the total volume was 0.85 to 0.91, which was high enough with the pore size of 1.57 to 1.77 nm. Nitrogen compounds such as imine, pyridine and pyrrole presenting favorable interforces to $CO_2$ molecules were formed throughout the whole preparation steps. The aminated ACF adsorbent showed the enhanced adsorption capacity, 0.40 mmol/g for low-level $CO_2$ flow (3000 ppm) at room temperature. Selectivity of $CO_2$ against dry air ($O_2$ & $N_2$) also increased from 1.00 to 4.66 by amination.

• 공업화학
• /
• 제10권7호
• /
• pp.1066-1072
• /
• 1999

고기능성 건설재료로 활용하기 위하여 불포화폴리에스테르수지를 사용한 폴리머 콘크리트의 물성에 대하여 조사하였다. 탄산칼슘(충전제)의 첨가량(5~20 wt %)과 세골재의 첨가량(10~50 wt %)에 따라 다양한 배합의 공시체를 제작하여 압축 및 휨강도, 흡수시험, 내열수성시험, 내산성시험, 세공분포측정 및 SEM에 의한 미세조직 관찰등을 실시하였다. 그 결과 폴리머 콘크리트의 압축강도와 휨강도는 시멘트 콘크리트보다 4배 정도 향상되었고, 흡수율은 1/100로 감소되었으며, 내산성시험에 의한 중량감소율은 1/27로 현저히 감소되었다. 내열수성시험후에 측정한 폴리머 콘크리트의 압축 및 휨강도는 모두 내열수성시험전에 측정한 강도에 비하여 67%, 47%로 각각 감소되었으며 폴리머결합재의 분해에 의하여 세공량과 세공율은 크게 증가되었다.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.37-42
• /
• 2005

유리연마슬러지와 graphite를 발포제로 사용하여 경량골재를 제조하였으며, 경량골재 내부기공과 물성과의 상관성을 도출하였다. 이때 graphite 함량을 각각 달리하여 성구를 제조하였으며, $700^{circ}C$ 및 $800^{circ}C$에서 20분 동안 소성하였다. 소성 전후 골제의 부피 변화를 검토한 결과, 발포제의 첨가량보다는 소성 온도가 즘 더 큰 영향을 미침을 확인하였다 기공의 크기 및 면적은 발포제 첨가량과 소성 온도 상승에 따라 증가하는 특징을 나타내었으나, 발포제 첨가량 $1\%$ 이상에서는 큰 폭의 증가를 동반하지 않았다. 흡수율/열전도율과 기공과의 상관성은 매우 높아, 각각의 상관관계계수는 $0.8\pm$ 이상을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제35권11호
• /
• pp.3331-3335
• /
• 2014

We examine the potential use of disordered mesoporous carbon as a functional additive for confining dissolved Li-polysulfides and improving the cycling performance of Li-S batteries. To promote a better understanding of the correlation between the total pore volume of disordered mesoporous carbon and the cycling performance of Li-S batteries, a series of disordered mesoporous carbons with different total pore volumes are successfully synthesized using a commercial silica template. Based on the electrochemical and structural analyses, we suggest that the total pore volume of disordered mesoporous carbon is a predominant factor in determining its capability for either the absorption or adsorption of Li-polysulfides, which is primarily responsible for enhancing the cycling performance. The addition of disordered mesoporous carbon is also effective in enhancing the homogeneous distribution of active sulfur in the cathode, thereby affecting the cycling performance.

• 멤브레인
• /
• 제27권5호
• /
• pp.406-414
• /
• 2017

본 연구에서는 얇은 폴리에틸렌 계 다공성 필름(두께 = $25{\mu}m$)에 이오노머를 충진시킨 세공충진 이온교환막을 개발하였으며 이를 적용한 전 바나듐 레독스 흐름전지의 충방전 특성을 고찰하였다. 특히 분자 크기가 다른 가교제를 혼합함으로써 이온교환막의 가교도 및 자유체적을 적절히 제어하여 저저항 및 저 바나듐 투과도를 나타내는 이온교환막을 제조하고자 하였다. 실험 결과, 제조된 세공충진 이온교환막은 상용막 대비하여 동등 수준의 우수한 전기화학적 특성을 나타내었다. 또한 바나듐 이온 투과도 및 전 바나듐 레독스 흐름전지 성능 평가 실험을 통해 얇은 막 두께에도 불구하고 상용막 대비하여 낮은 바나듐 이온 투과도와 높은 충방전 효율을 나타냄을 확인하였다.