• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.5
• /
• pp.489-500
• /
• 2004

Statement of problem: The use of zirconia prostheses fabricated with CAD/CAM system is on an increasing trend in dentistry. However, evaluation of the fit related to internal relief and marginal reproducibility of zirconia has not been reported. Purpose : This study was to evaluate the fit related to internal relief and marginal reproducibility of zirconia core fabricated with CAD/CAM system. Materials and methods: The evaluation was based on 30 zirconia cores and 5 IPS-Empress2 cores. Zirconia cores were fabricated in different conditions of internal relief(0, 10, 20, 30, 40 and $50{\mu}m$), and IPS-Empress2 cores were fabricated in accordance with the manufacturer's instructions. Before cementation, the marginal discrepancies or cores were measured on metal die. And then, each core was cemented to stone die, embedded in an acrylic resin and sectioned in two planes(mesiodistally and labiopalatally). The internal gaps were measured at the margin and axial surface. Measurements for the marginal discrepancies, the internal marginal gaps and the internal axial gaps were performed under a measuring microscope(Compact measuring microscope STM5; Olympus, Japan) at a magnification of ${\times}100$. In addition, the marginal conagurations of metal die, zirconia core and IPS-Empress2 core were examined with SEM(S-2700, Hitachi, Japan). Results : Within the limits of this study the results were as follows. 1. Compared with IPS-Empress2 cores, the marginal discrepancies of zirconia cores had no significant differences. the internal marginal gaps were statistically smaller and the internal axial gaps were statistically larger in each condition of internal relief. 2. The marginal discrepancies and the internal marginal gaps of zirconia cores had no significant differences related to the conditions of internal relief(P>0.05). 3. The internal axial gaps of zirconia cores with $0{\sim}20{\mu}$m for internal relief were significantly larger than that with $50{\mu}m$ (P<(0.0001). 4. SEM micrographs showed favorable marginal reproducibility of zirconia core and smooth texture on the milling surface. Conclusion: The marginal discrepancy and the internal gaps of zirconia core were clinically acceptable and the milling surface was showed smooth texture. For fabrication of the durable esthetic restoration, further investigations on complex design of core, milling accuracy, compatability of enamel porcelain and porcelain firing seems to be needed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.1
• /
• pp.26-31
• /
• 2017

Purpose: This study was to assess clinically the success rates and technical complications of cement-retained implant-supported single crowns and splinted crowns with zirconia frameworks. Materials and methods: 75 (single crowns: 51, splinted crowns: 24) cement-retained implant-supported single crowns and splinted crowns with zirconia frameworks which were restored in 67 patients were investigated for the evaluation of the success rates and technical complications. All restorations were cemented with temporary cement. Age, gender, restoration position, opposing teeth, restoration type were assessed as possible factors affecting technical complications. Results: During the mean observation period of 22.2 months, cumulative success rates of all restorations were 66.9 (73.2 - 60.6)%. Retention loss was found in 16 restorations (single crowns: 14, splinted crowns: 2), abutment screw loosening and veneer porcelain fracture were found in each 2 single crowns, respectively. According to a Kaplan-Meier survival analysis of single crowns and splinted crowns, the cumulative success rates were 58.9 (66.6 - 51.2)%, 87.5 (96.1 - 78.9)%, respectively. There was a statistically significant difference. The other possible factors did not have a significant effect on the technical complications. Conclusion: Retention loss was the most frequent technical complication. Abutment screw loosening and veneer porcelain fracture were found rarely in single crowns only. Age, gender, restoration position, and antagonist did not have significant effect on the technical complications. Splinted crowns had a higher success rate than single crowns.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.4
• /
• pp.289-298
• /
• 2014

Purpose: This study was designed to investigate the present conditions of illumination techniques in dental laboratories in order to distinguish colors for esthetic dentistry. Materials and Methods: A total of forty-eight local dental laboratories were selected for sampling a) luminous intensity and b) color temperature. We measured the luminous intensity and the color temperature on a center point of porcelain table with lux meter and color meter respectively. The measurements were performed twice, once on a clear day and on a cloudy day between 12 pm and 2 pm (day light and artificial illumination) and between 7 pm and 10 pm (artificial illumination only). Results: The results obtained were as follows. 1. The average luminous intensity in dental laboratories lighting was 1871 lx, and 67% of dental laboratories had luminous intensity greater than 1600 lx, which was appropriate for operations related to colors, while 33% of dental laboratories had in sufficient lighting for appropriate luminous intensity. 2. The average color temperature in dental laboratories lighting was 6506 K, which was inappropriate for operations related to color. None of the dental laboratories had a color temperature range of 5000 - 5500 K, which is appropriate for operations related to colors. 3. Between daytime and nighttime, also between clear day and cloudy day, the average luminous intensity and color temperature in dental laboratories were not significantly different. Conclusion: Illumination in most dental laboratories selected in this study was inappropriate for operations related to color.

• 보존과학연구
• /
• s.33
• /
• pp.109-124
• /
• 2012

Jangan-eup, located in Busan, South Korea,is a famous pottery-producing area in the Joseon Dynasty period. The aim of this paper was to determine the correlation of the pottery from each kiln site of Jangan-eup by analyzing the ingredients of clay as well as its production technique and firing condition. The materials that were used for the study were fragments of inlaid celadon, white porcelain, and white porcelain painted with underglazed iron excavated from six kiln sites of Jangan-eup:Sil-li, Daeryong-li, Hajangan-li, Sangjangan-li, Yongso-li, and Dumyeong-li. In each of the samples from the six kilns, cristobalite, mullite, and quats were found. The firing temperature distinguished from the crystal structure was higher in the following order: Dumyeongli>Sangjangan-li>Daeryong-li>Hajangan-li>Yongso-li>Sil-li. The samples were divided into four groups based on the ingredients of the clayfound therein: the Sil-li andDaeryong-li group, the Hajangan-li and Sangjangan-li group, the Yongso-li group, and the Dumyeong-li group. It was also found that the sample of Dumyeong-li was made using the most homogeneous clay compared with the other samples. The pottery of Jangan-eup had $40-400{\mu}m$ glaze, had bubbles in their bodies, and had $10-150{\mu}m$ sizes.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.20-37
• /
• 2017

It is called the "Painted lead glaze pottery" that is painted green, brown, yellow over white or light yellow glazed base among glazed pottery in the Northern Qi Dynasty. Even though the white glazed pot painted green with three ears and the yellow glazed jar painted green with long neck is found in the Fan-cui Tomb in Honghetun Village, Anyang City, Henan Province in 1971, these potteries were not focused in academic circles. While the white glazed pottery found with them was thought as the earliest evidence of the white porcelain that the date is clear, it has constantly been discussed so far. In this paper, focused on the painted lead glaze pottery, the materials from tombs and kiln sites are organized, and based on them, the decoration feature and production technique is analyzed. The emergence time of this pottery is checked by the date of tombs and the social value of this pottery is considered by the position of the buried person. The painted lead glaze pottery of the Northern Qi Dynasty has independent character such as porcelain clay, twice firing burning and painting technique over glazed base. This character emerged from several glazed potteries in the Northern Wei Dynasty and it continued to the Northern Qi Dynasty. At last, the white painted lead glazed pottery appeared. The painted lead glaze pottery was formed by the combination of a shape of the ceramic in Southern China and painting technique after the Northern Wei Dynasty in Northern China.

• The Journal of Korean Academy of Prosthodontics
• /
• v.40 no.3
• /
• pp.225-235
• /
• 2002

The color stability of current prosthetic composites is unknown, even though the quality of composite materials has been improving. This study examined the intrinsic color stability of various current prosthetic resins (ceramic-polymers) after an accelerated aging process and the extrinsic color stability after immersion in a coffee solution. By comparing the amount of discoloration after aging with that without aging, the effect of the accelerated aging process on external discoloration could be evaluated. Three current prosthetic composites (Artglass, Targis, Sculpture), one light polymerized direct composite (Z100) and one dental porcelain control (Ceramco) were assessed. The color changes (${\Delta}$E) of all the specimens were determined using the CIE $L^{*}a^{*}b^{*}$ color order system with a reflected spectrophotometer. The results were as follows: 1. The prosthetic composite materials subjected to the accelerated aging test showed no significant difference in color changes (p >.05). 2. In the coffee solution immersion test after the aging process, the color changes of the Targis and Artglass groups were not different from that of the Z100 group, which showed the highest color change. 3. In the immersion only test, a significantly high color change was observed in the sculpture glazing group. 4. The aging process influenced on the color changes more in the Targis, Artglass and Z100 groups than in the Sculpture and Ceramco groups.

• Journal of Technologic Dentistry
• /
• v.16 no.1
• /
• pp.78-104
• /
• 1994

Under the fee for service schedule of Korean health insurance system, rational fee for dental laboratory products based on the cost is required to be formulated. The purpose of this study was to find actual cost of dental laboratory products in case of a University Hospital. Materials of this study were used as follows : 1. Balance sheet at Dec. 31, 1992 and profit and loss report of the year 1992 of the sample hospital 2. Performance report of dental laboratory department. 3. Purchasing and other accounting bills of dental laboratory materials. The following methods were used. 1. Actual cost finding of dental laboratory department was performed. 2. Work sampling methods were used for measuring standard working time by the process of working. 3. To porcelain fused to metal crown(non-precious), Relative value of the cost of dental laboratory products was calculated as 1.00. 4. Fee and cost of those products were compared on the basis of Relative values. The results of the study can be summarized as follow : 1. Overall, it took longs time than other items. to product denture-related items. 2. When several teeth are made in a time, average production time is much sorter than when one tooth is made in a time. 3. The relative price cost of Dicor cast crown and denture related items are higher than the criterion items. 4. The material cost occupies average 11% out of the total price cost, proportion of personnel expenses is average as 60.0%. 5. Some of the components consisting of the price cost are not reflected adequately in setting the level of the reimbursement price. 6. Relative values of dental laboratory products price cost are varied in the range from 0.05 to 2.83, overall, the reimbursement price of dental products appears not to reflect adequately the price cost. On the basis of this study results, the following ideas would be suggested : 1. Fee Schedule of dental laboratory products should be renovated in order to reflect their costs. 2. Dental laboratory product manufacturers should be enlarged for the economy of scale which may be useful for cost- containment. 3. Dental laboratory producters themselves are required to be standardiqed according to the categories of skill.

• Conservation Science in Museum
• /
• v.6
• /
• pp.55-66
• /
• 2005

Three types of epoxy resins (Epo-Tek 301, Araldite 103, and Araldite 106) and three types of pigments (bunche, pastel, and conté), which are materials for porcelain restoration, were selected as examination materials. The tone change, porosity, and sedimental resulting from the mixtures of varying ratios of these three materials were observed. Samples were also made from the mixture of Epo-teck 301, four kinds of white pigments, and six types of fillers and subjected to ultraviolet ray penetration for 200 hours to observe the oxidation of the epoxy resins. The result showed that the chemical composition of pastel drastically changed when mixed with Epo-tek 301. Although bunche and conté displayed clear colors, those of conté were less clear when it was mixed with other substances. Adding a small amount of Epo-tek 301 tended to be driven into the corner, whereas mixing a large amount caused saturation and boiling. On the other hand, AW 106 did not display clear colors owing to its high viscosity; when mixed in large amounts, however, the clarity of colors improved. For AY 103, a similar standard of color clarity was maintained regardless of the mixture ratio. The following was ranked according to the level of porosity: [Pastel>bunche≒conté]. In terms of sedimentary, however, [bunche>conté>Pastel], [Epo-tek 301> AY 103> AW 106]. The result of measuring the degree of yellowing revealed that titanium, pastel, silicon dioxide, and kaolin tended to turn yellow, whereas bunche, conté, diatomaceous earth, and calcium hydroxide tended to resist yellowing.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.27 no.1
• /
• pp.1-13
• /
• 2011

The aim of this study was to evaluate shear bond strength of pressed reinforced composite resin ($TESCERA^{TM}$ ATL) veneering to zirconia with various surface treatments. Forty sintered zirconia specimens and forty pockmarked zirconia specimens were fabricated. All the materials were categorized as Group 1 (Control : porcelain veneering on zirconia surface), Group 2 ( $TESCERA^{TM}$ ATL dentine veneering after bonding agent application on zirconia surface), Group 3 ($TESCERA^{TM}$ ATL dentine veneering on pockmarked zirconia surface), Group 4 ($TESCERA^{TM}$ ATL dentine veneering after bonding agent application on pockmarked zirconia surface), Group 5 (Thermocycling on Group 1), Group 6 (Thermocycling on Group 2), Group 7 (Thermocycling on Group 3), and Group 8 (Thermocycling on Group 4). SBS(Shear bond strength) of 8 groups was determined with an Instron Universal Testing Machine. Also fractured surface of specimens were observed with a scanning electron microscope. There were no significant differences in the initial SBS between Group 1(control group), Group 3, and Group 4. (p>0.05) Group 2 presented the lowest SBS values. There was a no significant difference between just as 24hour water storage and simulated aging on pockmarked zirconia groups. (p>0.05) A formation of pockmarked irregularities on zirconia surface as mechanically pitted surface was reliable method for establishing a stronger bond between $TESCERA^{TM}$ ATL and zirconia-based material.

• Science of Emotion and Sensibility
• /
• v.19 no.2
• /
• pp.101-112
• /
• 2016

Selecting appropriate materials can be significantly important to make different image in the product and also give distinguished express to the users. A material for the ceramic product surface consists of the combination between a glaze and a body, and each attribution of materials and the way of the combination creates different texture and color. This study analyzes the difference between visually and tactually sensibility of ceramic surface to through the simulating both visual and tactual stimulation by verbal evaluation method. Totally 13 adjectives are selected from homepage of local and global ceramic product brand. And totally 12 ceramic samples are created with the consideration of color, glossiness and roughness. These 12 samples are the combination between four ceramic bodies (White porcelain, Celadon_c, Sancheong and Black soil) and three glazes (Transparent, Celadon_g, Black glaze). The respondents of first survey were asked to rub, touch and hold before evaluating the sensibility of ceramic surface and other respondents of second survey were asked to evaluate visual images of 9 samples which showed meaningfully difference from first survey. The surface which scored the highest sensibility with the first survey was 'pure' on a surface of White porcelain body with Transparent glaze, and the lowest was also 'pure' on a surface of Black soil body with Transparent glaze. The highest score in the second survey was the same result as the first survey, but the lowest scored 'casual' and the surface was Black soil body with Celadon glaze. By the comparison with two survey results, not every sensibility is same result shown as the first survey and the second survey, but the tactile sensibilities such as 'artistic', 'luxurious', 'sensuous', 'romantic' and 'mysterious' can be experienced by via visual materials of ceramic surfaces.