• Journal of the Korean Society of Propulsion Engineers
• /
• v.7 no.1
• /
• pp.18-27
• /
• 2003

To perform combined tests with propellant feeding system and engine, which were developed for KSR-III launcher, vertical test stand was organized and a series of hot-fire combustion tests were carried out with engines of several injector faceplate types. In hot-fire tests in vertical installation, combustion instabilities occurred right after ignition with an engine without baffle, and such combustion instabilities did not occur at ignition add during mainstage operation for an engine with STS or composite baffle. 1.regular and temporary pressure pulsations(popping) were detected during steady operation with a baffle engine, however a development to combustion instabilities with resonant mode was highly suppressed by baffle. With a series of tests, it was confirmed that the last developed engine, which has composite baffle, was operated successfully in KSR-III flight propulsion system.

• Journal of Oral Medicine and Pain
• /
• v.19 no.2
• /
• pp.193-203
• /
• 1994

The author performed this study for investigation of the magnitude of mandibular positional change caused by joint sound during mandibular opening and closing movement. There have been many studies stated mandibular border movement or other functional movement, and there also have been many studies reported clicking sound related to mandibular movement speed, trajectory and clinicl course of temporomandibular disorders(TMDs), but there have not been so many studies stated spatial mandibular position accompanied by joint sound. For this study 46 TM joint from the patients with TMDs were used and they were compared by character and occuring phase of the joint sound. Synchronized data which were amplitude and frequency of joint sound and amount of mandibular positional change were collected through sonopak and BioEGN rotate of Biopak system, respectively. Mandibular position was analyzed for translational and rotational movement change between before and after joint sound. The obtained data were processed with SAS program and summary of this paper were as follows : 1. Mean value of the amount of translational movement in whole joints were 6.0mm in vertical direction, 3.3mm in anteroposterior direction and 0.8mm in lateral direction between before and after joint sound. 2. Mean value of the amount of translational movement in clicking joinnts showed slightly increased tendency than in popping joints. 3. The amount of mandibular change in translational movement during closing phase were more than during opening phase. 4. The amount of mandibular rotational change in whole joints were $1.1^{\circ}$, 1.0mm in frontal plane and $0.9^{\circ}$, and 0.8mm in horizontal plane. 5. The amount of rotational movement were more in clicking joints than in popping joints and were more during closing phase than during opening phase, but statistically significance were showed only in frontal plane.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.1
• /
• pp.5-11
• /
• 2014

The purpose of this paper is to investigate an analytical approach for opening performance evaluation of the nuclear pressure safety valve based on standard codes such as ASME or KEPIC. It is well-known that safety valve is considered as one of pressure relief valves for protecting a boiler or pressure vessel from exceeding the maximum allowable working pressure. When pressure in a container reaches its set pressure, the safety valve commences discharging the internal fluid by a sudden opening called as popping. Safety valve is usually evaluated by set pressure, full open, blow-down, leakage and flow capacity. The test procedure and technical requirement for performance evaluation is described in international code of ASME code such as BPVC. The opening characteristics of steam safety valve can be analyzed by computational fluid dynamics (CFD) and steam shaft dynamics. First, the flow analysis along opening process is simulated by running the CFD models of the ten types of opening steps from 0 to 100%. As a analysis result, the various CFD outputs of flow pattern, pressure, forces on the disc and mass flow at each simulation step is demonstrated. The lift force is calculated by using the forces applied on disc from static pressure and secondary flow. And, the effect of huddle chamber or control chamber is studied by dynamic analysis based on CFD simulation results such as lift force. As a result, dynamics analysis shows opening features according to the sizes of control chamber.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.5
• /
• pp.437-442
• /
• 2003

This study was conducted to confirm the effect of drying method on quality of popped rice for making salyeotgangjung(popped rice lump with malt syrup) in process of drying gelatinized rice. The drying were performed at dry oven or convection oven, at $30^{\circ}C,\;50^{\circ}C\;and\;105^{\circ}C$, respectively. There were not significant differences in the hardness of popped rice among the drying methods. The dry at $30^{\circ}C$ constant in dry oven showed higher popping rate, good external surface, uniformed and well developed internal cell size. The dry at $30^{\circ}C$ in convection oven and $50^{\circ}C$ constant temperature in dry oven showed low expansion and poor external surface, respectively. In conclusion, the drying at $30^{\circ}C$ in non-convection oven had the highest quality of popped rice for salyeotgangjung.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.205-207
• /
• 2010

본 논문에서는 버블포핑을 구현하는 증강현실 기법을 제안한다. 제안 기법은 진동촉각햅틱 마우스, 비디오 입력용 웹캠, 마커 패턴 영상, 그래픽 구 버블 객체, 그래픽 마우스 등으로 구성된다. 마우스의 이동에 따라 그래픽 마우스가 3차원 공간상에서 이동하면서 버블과의 충돌이 발생하게 되면, 충돌시 발생하는 버블의 이벤트로 fade-out과 diverge and fade-out의 버블 효과를 구현한다. 제안 시스템은 ARToolkit 및 OpenGL을 기반으로 제작되었으며, 시각적인 마커 기반 시스템으로 버블의 움직임과 사용자의 인터랙션을 통해, 버블 포핑의 증강현실을 전달한다.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.05a
• /
• pp.100-104
• /
• 2000

This paper deals with finite element analyses of residual stresses causing popping up which are induced in micromachining processes of a mcroaccelerometers. After heating the tunnel gap up to 100 degree and get it through the cooling process and the additional bean up to 80 degree and get is through the cooling process. We learn the thermal internal stress of each shape and compare the results with each other after heating the tunnel gap up to 400 degree during the Pt deposition process. We want to seek after the real cause of this pop up phenomenon and diminish this by change manufacturing processes of microaccelerometer by electrostatic force.

• The Korean Journal of Pain
• /
• v.28 no.4
• /
• pp.275-279
• /
• 2015

Facet joint synovial cysts are usually associated with osteoarthritis of the adjacent facet joint and/or spondylolisthesis. In between the conservative and operative ends of the treatment spectrum lie minimally invasive techniques such as cyst rupture using epiduroscopy. In this report, we describe an 82-year-old male patient presenting with low back pain radiating to his lower left extremity and associated paresthesia. Magnetic resonance imaging of the lumbar spine revealed a synovial cyst at left L4/5 facet joint. Using epiduroscopy, the cyst was mechanically ruptured by popping it with the tip of the scope. The patient remained symptom-free at his successive visits until 12 months after the procedure, and was opened for desired follow up.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.36-42
• /
• 2001

This paper deals with finite element analyses of residual stresses causing popping up which are induced in micromachining processes of a microaccelerometer sensors. The paddle of the micro accelerometer sensor is designed symmetric with respect to the direction of the beam. After heating the tunnel gap up to 100 degree and get it through the cooling process and the additional beam up to 80 degree and get it through the cooling process. We learn the thermal internal stresses of each shape and compare the results with each other, after heating the tunnel gap up to 400 degree during the Pt deposition process. Finally we find the optimal shape which is able to minimize the internal stresses of microaccelerometer sensor. We want to seek after the real cause of this pop up phenomenon and diminish this by change manufacturing processes of microaccelerometer sensor by electrostatic force.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.317-322
• /
• 2001

정보 통신 기술의 발달이 인간 생활에 많은 편리함을 가져다 주었지만 개인의 정보 유출이나 소음 공해 등의 여러 가지 문제점도 야기 시켰다. 특히 휴대 전화 통화시 사용자의 개인적인 정보들이 공공 장소에서 그대로 노출이 되고, 또 그러한 통화로 인해서 타인에게 소음 피해를 주기도 한다. 이러한 병폐를 막기 위해서 휴대 전화 사용자는 최대한 작은 소리로 통화를 하되, 상대방에게 의도하고자 하는 바를 확실히 전달하여야 한다. 그러기 위해서는 휴대 전화에 근접 통화가 가능해야 하며, 일정한 방향의 방향성을 가져서 주위의 잡음에 대해 독립적으로 작동하도록 해야한다. 본 논문에서는 이러한 기능을 향상시키기 위하여 음향학적 이론을 바탕으로 휴대전화에 사용되어지는 마이크로폰을 새로 설계, 제작하고 그 성능을 시험하였다. 아주 작은 소리로 근접 통화를 할 때 발생하는 팝핑(popping) 현상이 최소한이 되도록 미세관 배열을 적용하였으며, 외부 소음 영향을 줄이기 위하여 방향성을 증폭시키고자 음원의 위치에 초점을 맞추는 기술을 적용하였다. 방향성 증폭은 4개의 마이크로폰 사용과 근거리 음원의 방향성 증가를 위한 신호 처리기술을 적용하였다. 이 기술의 적용 효과를 실험을 통하여 검증할 수 있었다.

• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.73-79
• /
• 2001

정전기력을 이용하는 마이크로가속도계 센서는 단결성 실리콘 SOI(Silicon On Insulator) 웨이퍼의 기판에 절전재료 적층과 등방성 및 이방성 부식공정으로 제작한다. 마이크로가속도 센서 개발에는 3차원 미소구조체의 제작공정에서 가열 및 냉각공정의 온도구배로 야기되는 포핑업과 같은 열변형 해석이 최적 형상설계에 중요한 요건이다. 본 연구에서는 양자역학적 현상인 턴널링전류 원리로 승용차 에어백의 검침부 역할을 하는 마이크로가속도 센서의 제조공정에서 소착현상을 방지하는 부가 비임과 턴널갭의 FIB 절단가공과 백금 적층공정의 열적 거동을 해석한다. 마이크로머시닝 공정에서 온도의존성을 고려하여 연성해석하고 유한요소법의 상용코드인 MARC K6.1로 분석한 결과를 단결정 실리콘 웨이퍼로 가공하는 마이크로가속도 센서의 최적공정 및 형상설계를 위한 기초자료로 활용될 수 있을 것으로 기대된다.