• Journal of Korean Society of Forest Science
• /
• v.98 no.3
• /
• pp.242-246
• /
• 2009

We examined sapflow of two populus tree species (Populus alba ${\times}$ Populus glandulosa and Populus euramericana) grown under Swine wastewater treatment, and measured relationship between sapflow and climate facters. Sapflow of P. euramericana was 1.5 times greater than that of P. alba ${\times}$ P. glandulosa from September to late December 2007. However, sapflow of P. euramericana and P. alba ${\times}$ P. glandulosa was similar after late January. The relationship between the mean temperature and sapflow was relatively high. There was a decrease in sapflow tendency of the two poplar species during the late October when the mean temperature was low. Trends on relationship between the relative humidity and sapflow showed low relationship. However, data showed weak relationship between sapflow and precipitation. During the period of less precipitation, sapflow of P. alba ${\times}$ P. glandulosa has no relationship. Sapflow of two populus species was still active during non-growing season. P. euramericana was considered as a better species than P. alba ${\times}$ P. glandulosa, in terms of phytoremediation.

• Journal of the Korean Institute of Gas
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2012

According to the last 5 year statistics of KGS, there occurred 22 under ground gas pipe accidents per year in Korea. And about 5 accidents per year were caused from the third party digging. IT recognition technique could reduce such underground gas accidents. Among IT recognition technique, RFID is most poplar. In the air, RFID were applied to various fields including the distribution industry, but underground condition, the research and application cases of RFID were little This research was undertaken to see the applicability of RFID to underground gas pipe safety. By use of 900 MHz RFID reader and commercial metal tag, the stable recognition distance was measured in the similar underground condition of LNG pipe. Stable recognition depth of RFID tag were measured to be 50, 45, 25 cm in the medium of soil, 5 cm-thick-concrete+soil, and water respectively. The measured distances were considered to be the meaningful distance to prevent the gas pipe accidents Also the efficient ways to input the required gas pipe data to the 24 byte metal tag were proposed. Application of RFID to underground LNG supply system will not only reduce the gas accidents due to third party digging but also improve the gas line maintenance efficiency.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.59-64
• /
• 2014

This study describes analysis of genetic diversity and spatial genetic structure of Korean poplar (Populus koreana Rehder) in Mt. Odae using I-SSR markers. P. koreana is a deciduous broad-leaved tree species that primarily grows in the alpine valleys of China, Russia and North Korea. In South Korea, P. koreana is found limitedly in Gangwon province. Especially, the population in Mt. Odae is located on the southern limit line, its importance is emphasized from the genetic resource conservation perspective. The Shannon's diversity (I=0.230) and the expected heterozygosity (He=0.151) were relatively low as compared with those of other plant species. Spatial autocorrelation analysis using Tanimoto's distance showed that the genetic patch was founded within 400 m. It is suggested that individual trees for ex situ conservation should be sampled with a minimum distance of 400 m between trees.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.158-162
• /
• 2012

The acclimatization of in vitro propagated plants is an important step to produce vigorous plants for clonal forestry and in vitro micro-environment may affect the growth in ex vitro condition. To monitor in vitro environmental effects on the growth in ex vitro condition, several culture systems such semi-solid medium(SS), temporary immersion bioreactor(TIB) and continuous immersion bioreactor(CIB) culture types were tested to compare for the growth of acclimated plants of Liriodendron tulipifera. Results suggested that morphological characters, stomatal conductance, evapotranspiration and chlorophyll contents of acclimated plants were affected by the different of in vitro culture conditions. CIB type of culture was resulted to the lowest value in the biomass of acclimated plants. Net photosynthsis rate of CIB was the same level as those of SS and TIB. However, stomatal conductance, evapotranspiration and $CO_2$ partial pressure in the intercellular air space were lower than those of SS and TIB. The amounts of chlorophyll a, b and carotenoids were also lower than those of the other two culture systems. TIB, showing a little lower or higher value than SS in many growth character, is recommended rather than CIB to produce healthy yellow poplar plants in ex situ condition.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.4
• /
• pp.384-391
• /
• 1998

Nutrient removal during stem harvest was evaluated in a one-year rotation willow bioenergy plantation. For the stem nutrient content, the stem biomass and stem nutrient concentration were collected in the winter of 1987-1993 from the established willow plantation at Tully, New York, U.S.A. in 1987. Five willow clones and one hybrid poplar clone were planted. Half of the plots were fertilized annually with $336kg\;ha^{-1}$ N, $112kg\;ha^{-1}$ P, and $224kg\;ha^{-1}$ K. All trees were harvested annually. Mean annual nutrient removals of N, P, K, Ca, and Mg by annual stem harvesting over seven years were respectively 30-70, 4-10, 14-40, 19-59 and $3-5kg\;ha^{-1}$. Fertilized plants exported higher quantities of nutrients than non-fertilized ones. Nontheless, quantities of nutrients exported were well below the quantities supplied by fertilization suggesting that nutrients removal by stem harvesting is not likely to cause a decrease in soil fertility. However, in non-fertilized plots, the amount of nutrients removed could result in decrease of nutrient availability and soil fertility over the long-term. An evaluation of the clones revealed that clone SV1 is the most nutrient efficient.

• Plant Biotechnology Reports
• /
• v.3 no.3
• /
• pp.175-182
• /
• 2009

Simple, reproducible, high frequency, improved plant regeneration protocol in Eastern Cottonwood (Populus deltoides) clones, WIMCO199 and L34, has been reported. Initially, aseptic cultures established from axillary buds of nodal segments from mature plus trees on MS liquid medium supplemented with $0.25mg\;1^{-1}$ KIN and $0.25mg\;1^{-1}$ IAA. Nodal and internodal segments were found to be extra-prolific over shoot apices during course of aseptic culture establishment, while $0.25mg\;1^{-1}$ KIN concentration played a stimulatory role in high frequency plant regeneration. Diverse explants, such as various leaf segments, internodes, and roots from in vitro raised cultures, were employed. Direct plant regeneration was at high frequency of 92% in internodes, 88% in leaf segments, and 43% in root segments. This led to the formation of multiple shoot clusters on established culture media with rapid proliferation rates. Many-fold enhanced shoot elongation and growth of the clusters could be achieved on liquid MS medium supplemented with borosilicate glass beads, which offer physical support for proliferating shoots leading to faster growth in comparison to semi-solid agar or direct liquid medium. SEM examination of initial cultures confirmed direct plant regeneration events without intervening calli. In vitro regenerated plants induced roots on half-strength MS medium with $0.15mg\;1^{-1}$ IAA. Rooted 5- to 6-week-old in vitro regenerated plants were transferred into a transgenic greenhouse in pots containing 1:1 mixture of vermicompost and soil at $27{\pm}2^{\circ}C$ for hardening and acclimatization. 14- to 15-week-old well-established hardened plants were transplanted to the field and grown to maturity. The mature in vitro raised poplar trees exhibited a high survival rate of 85%; 4-year-old healthy trees attained an average height of 8 m and an average trunk diameter of 25 cm and have performed well under field conditions. The regeneration protocol presented here will be very useful for undertaking genetic manipulation, providing a value addition to Eastern Cottonwood propagation in future.

• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.338-341
• /
• 2018

This study investigated the possibility of using pine tree sawdust in thinning-out tree as a substitute for poplar and douglas-fir tree sawdust in oyster mushroom cultivation. Mycelial growth was 10.8 cm in medium supplemented with 70% pine sawdust after 18 days of culture and 10.2 cm in control medium. Mycelial density showed high density with no significant difference between treatments. Fresh weight and diameter of fruiting bodies were slightly lower in medium supplemented with pine tree sawdust. The hardness of pine tree sawdust was slightly higher in the medium supplemented with 20% and 30% of pine tree sawdust. The L value showed a tendency to be higher in the pine added medium, but the a and b values d id not show any significant difference between the treatments. The yields of fruiting body were 157 g / 850 ml for the control and 170 g / 850 ml for the 40% added pine tree sawdust.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.160-165
• /
• 2021

This study was conducted to investigate a suitable substrate formulation for bag cultivation of Hypsizygus marmoreus. To determine the optimum media composition for H. marmoreus, chemical properties of various media and culture properties were investigated. The fastest primordia formation (9.0 days), the shortest fruiting body harvest period (18.0 days), and the highest yield (144.7 g/bag) were realized with the T6 formulation (55:15:20:5:5 mixing ratio of poplar sawdust, wheat bran, rice bran, dried soybean powder, and palm kernel, respectively). The chemical properties of the T6 formulation were pH, 6.0; total carbon, 19.0%; total nitrogen, 0.83%; C/N ratio, 22.8; P₂O₅, 0.61%; K₂O, 0.46%; and MgO, 0.29%. This is the first attempt using plastic bags for cultivation and will help expand the production of H. marmoreus.

• Journal of Mushroom
• /
• v.17 no.1
• /
• pp.1-6
• /
• 2019

Agrocybe cylindracea was cultured in a bag, in which sawdust culture medium (1 kg) is put in a plastic bag (PE), with poplar sawdust, rice bran, wheat bran, and dried bean curd refuse in the ratio of 70:10:10:10 (v/v). 2% of the culture medium was inoculated with the liquid starter of Agrocybe cylindracea, and this was incubated at $25^{\circ}C$. After incubation, the A. cylindracea was further cultured by cutting the top vinyl portion of the bag down to the level of the culture medium surface of the first inoculation part. The cut culture medium was placed in a growth room at $25^{\circ}C$, and pin-heading was induced under light irradiation at 99% humidity and 1,000 ppm $CO_$ level for 3days. When the grow the environment was controlled at 95% humidity and $21^{\circ}C$, the bending of the stem was less as compared to that when the cap of the bag had been removed. The number of effective fruiting bodies per bag increased by 140% (28.8), the quantity per bag increased by 29.5%, and 148.5 g A. cylindracea could be potentially harvested.

• Journal of the Korean Wood Science and Technology
• /
• v.49 no.6
• /
• pp.574-590
• /
• 2021

International efforts to prevent illegally logged wood are expanding around the world. The "Legal Wood Trade Promotion System" was enacted in Korea in 2019 to strengthen the legal import and distribution of commercial wood in Korea. Since then, this system has promoted and ensured that the imported wood and wood products are legal with respect to the country of origin, wood species, and harvested area. As verification methods, DNA analysis technology and anatomical analysis using a microscope are mainly used in conjunction. Therefore, in this study, wood species of plywood were identified by analyzing the anatomical characteristics of various wood products for the first time. Douglas fir (Pseudotsuga menziesii (Mirb.) Franco.) and larch (Larix kaempferi (Lamb.) Carriere) plywoods (7, 9 ply) were obtained from four companies that supply plywood in Korea. After cutting each company's plywood to a size of about 1 cm³, the layers from top to bottom were separated into single layers, and three sections were observed using an optical microscope. The results revealed that the plywood was composed of a mixture of softwood and hardwood wood species, pine wood species, poplar wood species, or a mixture of larch and pine wood species. Identification of wood species using microscopy is important and can enable the scientific analysis and verification of various wood products, including plywood, imported from countries where the likelihood of indiscriminate distribution of illegal wood and illegal logging is high.