• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.685-694
• /
• 2016

In this study, the thermal degradation behavior of biomass during torrefaction was studied by thermogravimetric and byproduct gas analysis. Torrefaction temperature, time, and heating rate were $220{\sim}300^{\circ}C$, 110 min, and $10{\sim}30^{\circ}C/min$, respectively. The degradation rate of yellow poplar was 8.01~8.81% at $220^{\circ}C$ and 71.86~77.38% at $300^{\circ}C$ depending on heating rate. The degradation rate significantly increased at temperature over $240^{\circ}C$. On the other hand, degradation rate of larch was relatively low as 49.58~54.15% at $300^{\circ}C$. The activation energy of yellow poplar was 87.32~91.24 kJ/mol; these values did not significantly change with heating rate. The activation energy of larch was 83.85~91.60 kJ/mol. The major components of the gas generated during torrefaction were derived from hemicellulose. The component types and concentrations increased with torrefaction severity. High concentrations of furfural and acetic acid were detected during torrefaction of yellow poplar.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.59-68
• /
• 2008

This study was carried out to investigate the effects of the Inside end-taping (Inside-ET) and Outside end-taping (Outside-ET) treatments on prevention of drying defects during radiofrequency/vacuum (RF/V) drying domestic yellow poplar log cross section with size of 20~75 mm in thickness and 120~470 mm in diameter. The treatments of Inside-ET and Outside-ET were quite effective for producing sound log cross sections with thinner than 33 mm and smaller than 270 mm in diameter. Even the 60 mm- and 75 mm-thick log cross sections, if the diameter was smaller than 30 cm, it might expect preventing formation of border checks by appropriate end-taping treatments. The positions of the observed border checks differed in diameter ranging at a relative radius about 0.50~0.63 diameter, and it was estimated that it was necessary to select the border position of end-taping treatment properly according to the diameter of log cross sections. It was observed that the radius of 0.3 diameter was the critical location for pretreatment for preventing formation of border checks in the log cross section with middle diameter. There were severe border checks and V-shaped cracks in the log cross section with large diameter. This was because of the severe variation of moisture content along radial direction of natural characteristic of domestic yellow poplar.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.18 no.5
• /
• pp.37-48
• /
• 2015

Soil nutrient management is important to maintain the constant productivity of seedling production in the nursery for successful forest restoration. This study investigated the effects of organic manure and chemical fertilizer application levels on the growth, soil properties, and nutrient concentrations of yellow poplar seedlings. One-year-old yellow poplar seedlings were treated with the combination of 3 level organic manures(0, 5 Mg/ha, 10 Mg/ha; mixture of poultry manure, cattle manure, swine manure, and sawdust) and 3 level nitrogen-phosphorus-potassium(NPK) chemical fertilizers(0, 1x(urea, $30g/m^2$; fused superphosphate, $70g/m^2$; potassium chloride, $15g/m^2$), 2x). Organic manure significantly increased the soil pH and the concentrations of nitrogen, available phosphorous, exchangeable potassium, calcium, and magnesium. In contrast, the NPK chemical fertilizer decreased the soil pH and exchangeable calcium concentration, did not affect the soil concentrations of nitrogen and magnesium, and increased the concentrations of available phosphorous and exchangeable potassium. Both organic manure and NPK chemical fertilizer treatments increased the seedling height, root collar diameter, and dry weight by 39% and 25%, respectively. The treatment with manure 5 Mg/ha and NPK 2x chemical fertilizer mostly increased seedling dry weight by 2.6 times more than that of the control. Compared to the effects of the fertilization treatments on the soil properties, the effects on nutrient concentrations in the leaves were relatively small. These findings indicate that organic manure that was derived from livestock byproducts and sawdust can be utilized with chemical fertilizer to improve seedling production as well as conserving soil quality.

• Journal of Korean Society of Forest Science
• /
• v.103 no.2
• /
• pp.189-195
• /
• 2014

Basic leucine zipper (bZIP) protein is a regulatory transcription factor that plays crucial roles in growth, development and stress response of plant. In this study, we isolated a PagbZIP1 gene that belonged to Group SE3 of bZIP from Populus alba ${\times}$ P. glandulosa, and investigated its expressional characteristics. The PagbZIP1 is 844 base pairs long and encodes a putative 144-amino-acid protein with an expected molecular mass of 16.6 kDa. The PagbZIP1 has two conserved domains including the basic and leucine zipper portions. Southern blot analysis revealed that two copies of the gene are presented in the poplar genome. PagbZIP1 was specifically expressed in the root and suspension cells. Moreover, the expression of PagbZIP1 was induced by drought, salt, cold and ABA. Therefore, our results indicated that PagbZIP1 might be expressed in response to abiotic stress through the ABA-mediated signaling pathway in poplar.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.1
• /
• pp.1-11
• /
• 2013

In this study, we investigated chemical characteristics of solid residues obtained from inorganic acid hydrolysis of hybrid poplar (Populus alba ${\times}$ glandulosa). Different concentration (72, 36, 18%) of sulfuric acid and hydrochloric acid were used for first hydrolysis step and second hydrolysis step were carried out after equally dilution to 4%. Solid residues after consecutive two step hydrolysis were named to RS72 (Residue from Sulfuric acid 72%), RS36, RS18, as well as RC36 (Residue from hydroChloric acid 36%) and RC18, respectively. The yield of RS decreased from 71.2% to 21.4% with increasing sulfuric acid concentration in the first hydrolysis step, whereas that of RC showed little difference (67.0% to 65.0%), irrespective of hydrochloric acid concentration. The lignin content in solid residue was 23.6% for both of RS36 and RS18, 25.6% for RC36 and 27.3% for RC18, respectively. The results of pyrolyzer-GC/MS showed that 24 cellulose derivatives (Levoglucosan, Furfural) and 21 lignin derivatives (Guaiacol, Syringol) were detected. Thermogravimetric analysis indicated that the yield of char increased and maximum wieght loss rate decreased with increasing lignin portion of solid residue. Therefore, structure of lignin was condensed effectively by sulfuric acid and by high concentration of acid.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.291-296
• /
• 2012

Triploids are a useful tool for biomass production and molecular breeding of trees with a long life span. Triploids of the poplar 'Hyunsasi' (Populus alba ${\times}$ P. glandulosa) have been developed by crossing between female diploids and a male tetraploid. The tetraploid was developed around the 1970s at Korea Forest Research Institute by colchicine-induced chromosome doubling. Seedlings of the $F_1$ generation were analyzed using flow cytometry to verify their ploidy status. The mean relative fluorescence index of 3 F1 poplars, labeled as Line- 1, Line-17, Line-18, were approximately 1.5 times higher than those of diploid poplars, and the results clearly indicated that they were triploids. The phenotype of the F1 poplars included larger leaves and thicker stem than diploids, and abnormal leaf morphology, especially in the triploid 'Line-18'. Three triploid lines developed roots more slowly and had less roots than diploid. However, 3 poplar cytotypes (2x, Line-1, Line-17) rooted within 10 days on MS medium. In contrast, compared with the 3 cytotypes, the Line-18 showed about 80% and 70% in the rooting rate and the number of roots. The triploid poplars could be directly utilized for biomass production and with their sterility, they could serve as basic material for genetic transformation. In addition, flow cytometric analysis proved to be an effective and reliable method for screening forest trees for their ploidy level.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.331-337
• /
• 2013

Formate dehydrogenase (FDH), catalyzing the oxidation of the formate ion to carbon dioxide, is known as the stress protein in response to drought, low temperature and pathogen infection. To study the functions of FDH in poplar (Populus alba ${\times}$ P. glandulosa), we isolated a FDH cDNA (PagFDH1) and examined its expressional characteristics. The PagFDH1 is 1,499 base pairs long and encodes a putative 388 amino acid protein with an expected molecular mass of 42.5 kDa. The PagFDH1 protein has N-terminal mitochondria signal peptide and $NAD^+$ binding domain. Southern blot analysis indicated that a single copy of the PagFDH1 is present in the poplar genome. PagFDH1 is expressed highly in the suspension cells (especially in the lag and early exponential phases) and moderately in roots, flowers and leaves. ABA-mediated enhanced expression of PagFDH1 in response to drought and salt stress treatments indicates that the gene product could play an important role in the development of stress resistant trees.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.75-85
• /
• 2011

The main purpose of this study is to evaluate the potential of producing bioethanol from yellow poplar ($Liriodendron$ $tulipifera$) wood chips by oxalic acid pretreatment and to examine the pretreatment conditions by response surface methodology (RSM). Based on $2^3$ factorial design, adjusted variables were reaction temperature ($^{\circ}C$), residence time (min), and acid loading (g/g), and a series of distinct 15 experimental conditions was organized with duplication at central point (total 16 performances). After pretreatment, simultaneous saccharification and fermentation (SSF) was subjected on solid fraction with yeast strain $Pichia$ $stipitis$. Maximum ethanol yields of the most samples were measured at 72 hours and applied to RSM as a dependent variable. 9.7 g/${\ell}$ of ethanol was produced from the solid pretreated at $180^{\circ}C$ for 40 min with 0.013 g/g of oxalic acid loading. According to the response surface methodology, it was determined that the temperature is the most governing factor via statistic analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.459-468
• /
• 2011

The main purpose of this study was to examine the influence of treatment amounts of Slurry Composting and Biofiltration liquid fertilizer (SCBLF) on biomass growth of Yellow poplar (Liriodendron tulipifera) and to compare bioethanol production from the harvested wood. Relative growth rate, biomass production and leaf characteristics were significantly enhanced by SCBLF treatment and medium treatment plot showed highest value. Nitrogen compounds and water content in SCBLF affected to increase chlorophyll contents which led improving biomass production (64.67%) and glucose contents (6.07%) than control. Organosolv and dilute acid pretreatments were preliminarily carried for bioethanol production, and the pretreatment processes were conducted at all the same solid to liquid ratio (1 : 10), reaction temperature ($150^{\circ}C$), preheating time (40 min) and residence time (10 min). The water insoluble solid recovery of Organosolv pretreatment with 1% sulfuric acid as a catalyst was the lowest and that of medium treatment plot was 44.81%. Exchangeable cations in SCBLF might be affected to increase pretreatment effect. The simultaneous saccharification and fermentation process was followed to determine the ethanol production of the pretreated biomass. The highest ethanol production yield based on initial weight was obtained from high treatment plotby Organosolv pretreatment with 1% sulfuric acid (16.11%). But regarding biomass production, medium treatment plot produced most, and bioethanol production was increased by 72.93% than control.

• Journal of Korean Society of Forest Science
• /
• v.98 no.6
• /
• pp.740-747
• /
• 2009

We examined sapflow of two Populus species such as Populus alba ${\times}$ Populus glandulosa and Populus euramericana, grown under Swine wastewater treatment. Sapflow of Populus euramericana was 1.8 times higher than that of Populus alba ${\times}$ Populus glandulosa for 14 months. Sapflow of Populus euramericana and Populus alba${\times}$Populus glandulosa was 4,628L and 2,538L during this period, respectively. Positive relationship between sapflow density and solar radiation and temperature had been shown. Mean temperature, relative humidity and sapflow was strongly associated. There was a decreasing sapflow tendency of the two poplar species during the late October when the mean temperature was decreased. In addition, the data showed high relationship between sapflow and photosynthesis. Two poplar species showed dramatic decrease of sapflow since October.