• The Korean Journal of Physiology
• /
• v.27 no.2
• /
• pp.139-150
• /
• 1993

We have reported that dopamine potentiates spontaneous contractions dose-dependently in guinea-pig antral circular muscle strips (Hwang et al, 1991). To clarify the underlying excitatory mechanism of dopamine on the gastric smooth muscle, the effects of dopamine on voltage-dependent $Ca^{2+}\;currents\;and\;Ca^{2+}\;-dependent\;K^+\;currents$ were observed in enzymatically dispersed guinea-pig gastric myocytes using the whole-cell voltage-clamp technique. Experiments were also done using isometric tension recording and conventional intracellular microelectrode techniques. 1) The effect of dopamine on the spontaneous contraction of antral circular muscle strips of the guinea-pig was excitatory in a dose-dependent manner, and was blocked by phentolamine, an ${\alpha}-adrenoceptor$ blocker. 2) The slow waves were not changed by dopamine. 3) The voltage-operated inward $Ca^{2+}$ current was not influenced by dopamine. 4) The $Ca^{2+}\;-dependent\;K^+$ outward current, which might reflect the changes of intracellular calcium concentration, was enhanced by dopamine. This effect was abolished by phentolamine. 5) The enhancing effect of dopamine on the $Ca^{2+}\;-dependent\;K^+$ current disappeared with heparin which is known to block the action of $InsP_3$. From these results, it is suggested that dopamine acts via $InsP_3-mediated\;Ca^{2+}$ mobilization from intracellular stores and such action potentiates the spontaneous contraction of guinea-pig gastric smooth muscle.

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.259-276
• /
• 2006

As the use of digital systems becomes more prevalent, adequate techniques for software specification and analysis have become increasingly important in nuclear power plant (NPP) safety-critical systems. Additionally, the importance of software verification and validation (V&V) based on adequate specification has received greater emphasis in view of improving software quality. For thorough V&V of safety-critical systems, V&V should be performed throughout the software lifecycle. However, systematic V&V is difficult as it involves many manual-oriented tasks. Tool support is needed in order to more conveniently perform software V&V. In response, we developed four kinds of computer aided software engineering (CASE) tools to support system specification for a formal-based analysis according to the software lifecycle. In this work, we achieved optimized integration of each tool. The toolset, NuSEE, is an integrated environment for software specification and V&V for PLC based safety-critical systems. In accordance with the software lifecycle, NuSEE consists of NuSISRT for the concept phase, NuSRS for the requirements phase, NuSDS for the design phase and NuSCM for configuration management. It is believed that after further development our integrated environment will be a unique and promising software specification and analysis toolset that will support the entire software lifecycle for the development of PLC based NPP safety-critical systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.631-637
• /
• 2005

This paper presents a stiffness analysis method for a low-DOF parallel manipulator, which takes into account of elastic deformations of joints and links. A low-DOF parallel manipulator is defined as a spatial parallel manipulator which has less than six degrees of freedom. Differently from the case of a 6-DOF parallel manipulator, the serial chains in a low-DOF parallel manipulator are subject to constraint forces as well as actuation forces. The reaction forces due to actuations and constraints in each limb can be determined by making use of the theory of reciprocal screws. It is shown that the stiffness model of an F-DOF parallel manipulator consists of F springs related to the reciprocal screws of actuations and 6-F springs related to the reciprocal screws of constraints, which connect the moving platform to the fixed base in parallel. The $6{times}6$ stiffness matrix is derived, which is the sum of the stiffness matrices of actuations and constraints. The six spring constants can be precisely determined by modeling the compliance of joints and links in a serial chain as follows; the link can be considered as an Euler beam and the stiffness matrix of rotational or prismatic joint can be modeled as a $6{times}6$ diagonal matrix, where one diagonal element about the rotation axis or along the sliding direction is zero. By summing the elastic deformations in joints and links, the compliance matrix of a serial chain is obtained. Finally, applying the reciprocal screws to the compliance matrix of a serial chain, the compliance values of springs can be determined. As an example of explaining the procedure, the stiffness of the Tricept parallel manipulator has been analyzed.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.51-59
• /
• 2003

Loading tests were carried out for model geocell to study the reinforcing effect by variation of tensile strength, cell height, soil density and embedded depth of geocell. From the result, it could be seen that the ultimate bearing capacity of the geocell system was influenced rather by the connection strength than by the tensile strength of geocell material. Bearing capacity increased with the increase of height to width ratio of geocell for the same relative density, strength and embedded depth. And the bearing capacity ratio(BCR) was higher at low relative density of sand than that of high relative density. The increase of bearing capacity was higher at geocell with high tensile strength than that of low tensile strength. And the influence was clear at higher relative density. Also the BCR was higher at shallow embedded depth of geocell. Without consideration of tensile strength of material, the application of bearing capacity formula suggested by Koerner seems not suitable for the special case with low tensile strength of geocell material.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.23 no.2
• /
• pp.278-287
• /
• 2009

Ji-San, the founder of HyungSang medicine, emphasized food intake and detoxification by stating, "Korean medicine begins with detoxification." Toxin accumulates in one's body unless the internal and external conditions stay in their harmony. The accumulation of toxin is also caused by western medication or one-sided diet, and detoxification should be considered in those cases. HwangRyunHaeDok-Tang reduces fire and heat, and the lesion is likely to locate in the upper body. BangPoongTongSung-San can be used for systemic disease. IkWoon-San also reduces fire and heat but mainly focuses on promoting urination. InSamPaeDok-San has an effect of curing the external symptoms of SangHan(傷寒), in addition to detoxification. SeoGakJiHwang-Tang, SoDok-Eum, and SeoGakSoDok-Eum can resolve the heat-toxin when it is located on the surface. SibJeonDaeBo-Tang enhances the detoxifying function of human body. GhamDu-Tang and JaGeum-Jung have a general effect on detoxification.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.6
• /
• pp.730-737
• /
• 2020

Objective : Spinal degeneration is a progressive disease, worsening over time. Lumbar degenerative disease (LDD) is a major spinal disease in elderly patients. Surgical treatment is considered for medically intractable patients with LDD and reoperation after primary surgery is not uncommon. The surgical outcome is occasionally unpredictable because of comorbidities. In the present study, the relationship between comorbidities and the incidence of reoperation for LDD over time was determined. Methods : The claims data of the health insurance national database were used to identify a cohort of patients who underwent spinal surgery for LDD in 2009. The patients were followed up until 2016. Medical comorbidity was assessed according to the Charlson comorbidity index (CCI). Cox proportional hazard regression modeling was used to identify significant differences in sex, surgery, age, causative disease, and comorbidity. Results : The study cohort included 78241 patients; 10328 patients (13.2%) underwent reoperation during the observation period. The reoperation rate was statistically higher (p<0.01) in males, patients 55-74 years and 65-74 years of age, and patients with decompression or discectomy. Significant association was found between increasing reoperation rate and CCI score (p<0.01). Based on multivariate analysis of comorbidities, the significantly higher reoperation rates were observed in patients with peripheral vascular disease, pulmonary lung disease, peptic ulcer, diabetes, and diabetes complications (p<0.01). Conclusion : The study results indicate the reoperation rate for LDD is associated with patient comorbidities. The comorbidities identified in this study could be helpful in future LDD studies.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.6
• /
• pp.623-628
• /
• 2010

The distribution of fluoroquinolones was investigated in the carp (Cyprinus carpio) and eel (Anguilla japonica) after an oral dose of 20 mg/kg body weight/day for 35 days. Blood samples were collected at 5 and 10 hours and 1, 2, 3, 5, 7, 9, 13, 20, 30, and 35 days after treatment. The fluoroquinolone concentrations were determined high- performance liquid chromatography with an ultraviolet detector. The recovery rates of fluoroquinolones in the fish samples ranged from 91.4-96.6, 91.2-96.5, and 90.4-98.6% for concentrations of 0.1, 0.5, and $1.0\;{\mu}g/g$, respectively. In the blood of carp, ciprofloxacin, enrofloxacin, norfloxacin, and sarafloxacin reached maximums level of 11.03, 9.37, 9.10, and $9.81\;{\mu}g/g$ 10 hours, 1 day, 10 hours, and 10 hours after treatment, respectively. In the eel blood, these reached maximum levels of 12.65, 11.18, 11.91, and $8.74\;{\mu}g/g$ all at 10 hours. Carp sample concentrations of ciprofloxacin, enrofloxacin, norfloxacin, and sarafloxacin were not measurable 20, 30, 20, and 20 days after treatment, respectively, in all experiments (

• Journal of Embryo Transfer
• /
• v.24 no.4
• /
• pp.253-257
• /
• 2009

To enhance the embryo preservation technology and better application of embryo transfer technique to the field (dairy science or animal reproduction. etc.), we examined the viabilities of bovine embryos produced in vitro and in vivo after cryopreservation according to their developmental stage and thawing temperature. Bovine embryos from in vivo/vitro fertilization (Hanwoo) were examined at day 7, 8, and 9. Survival rates and total cell numbers of in vivo fertilized embryos were as follows: morulae 68.8% and $67\;{\pm}\;6.0$; blastocysts 80.5% and $120\;{\pm}\;10$; expanded blastocysts 77.4% and $138\;{\pm}\;9.7$, respectively. Rates of embryo development for blastocysts and expanded blastocysts after thawing were significantly higher than that of morula stage embryos (p<0.05). While survival rates of in vitro fertilized embryos according to developmental stage showed no significant difference among groups (morula 67.9%; blastocyst 74.3%; and expanded blastocyst 79.4%), total cell numbers were significantly lower than those of other groups (morula $64\;{\pm}\;5.9$; blastocyst $116\;{\pm}\;8.7$; and expanded blastocyst $135\;{\pm}\;9.1$) For the viability according to thawing temperature, survival rate was higher in $37^{\circ}C$.

• Textile Coloration and Finishing
• /
• v.29 no.2
• /
• pp.86-96
• /
• 2017

To make uniform pressure distributed over the contact surface was necessary to cold pad batch dyeing machine. In this study, to confirm characteristic of flexibility and the contact pressure distribution through experimental analysis of padder roll were controlled by hydraulic cell. When there were no load pressure only inner pressure, the value of displacement in the center of padder were greater than the end of the padder. The results of this study showed that the padder had the optimum value of inner pressure for uniform contact pressure distribution. Measuring the contact pressure in a padder system were driven by using a pre-scale film. Uniform contact pressure distribution of cell padder were a linearly with load pressure and inner pressure. When the load pressure was less than 8 tons, the inner pressure for the uniform contact pressure was 1~4 bar. The padder roll performance curves proposed in this study were available for practical production environments and various roll designs.

• Textile Coloration and Finishing
• /
• v.29 no.2
• /
• pp.97-103
• /
• 2017

Polyketone fiber, a newly developed high strength fiber, has a tenacity and modulus similar to the p-aramid fiber, and can be used for reinforcing mechanical rubber goods(MRG), such as tires, hoses, and technical textiles. It will be expected for replacement of super fiber such as aramids and increasing the technical textile market share. This paper surveys the mechanical properties of polyketone fiber for technical textiles. For this purpose, dyed polyketone fabric is prepared, mechanical properties of coated and uncoated polyketone fabrics such as tensile strength, elongation and tear strength were examined before and after weather resistance test(temperature $63{\pm}3^{\circ}C$, humidity 60%, amount of power $0.35w/m^2$). The differences of mechanical properties between uncoated and coated fabrics for high functional technical textiles and composite materials are estimated through this study. The UV-stability of polyketone fabric showed obvious improvement after coating. After 168h(7day) of UV exposure, the coated fabric showed less deterioration in mechanical properties with the retained tensile strength and elongation at break greater than 22 and 17% of the uncoated polyketone fabrics values, respectively.