• 제목/요약/키워드: Polyurethane-urea

검색결과 27건 처리시간 0.024초

다공성 폴리우레탄 충진형 생인공간의 체외 성능 평가 (In Vitro Performance Assessment of a Bioartificial Liver Packed with Polyurethane Foam)

  • 이두훈;이지현;김성구;박정극
    • KSBB Journal
    • /
    • 제16권1호
    • /
    • pp.24-29
    • /
    • 2001
  • 급성 간부전 환자나 간이식 대기 상태의 환자의 생명을 간이 재생되거나 간 이식때 까지 연장시키기 위하여 생인공간이 많이 연구되고 있다. 본 연구에서는 적당한 cell opening을 가지는 폴리우레탄 폼을 15% NCO-prepolymer를 이용하여 직접 제조하였으며 이를 직경 3~4 mm 크기의 정육면체로 절단하여 충진형 반응기를 제조하였다. 분리된 일차간세포를 원심분리 방법을 이용하여 PUF 1 $cm^3$ 당 5.5$\pm$1.1$\times$$10^6$개의 세포를 접종하였으며 일주일간 관류 배양하면서 생인공간으로서의 성능을 측정하였다. 접종된 간세포는 구상체를 형성하였고 안정된 암모니아 제거능력과 요소 분비율을 나타내었다. 알부민 분비율은 배양 4일 이후 감소하는 경향을 보였다. 이상의 결과를 볼 때 PUF 충진형 간세포 반응기는 생인공간으로 개발되기에 충분한 가능성을 가진 것으로 판단된다.

  • PDF

고속액체크로마토그래피를 이용한 이소시아네이트의 동시 정량 (Simultaneous Determination of Isocyanates by High Performance Liquid Chromatography)

  • 이선주;이광묵;노영만
    • 한국산업보건학회지
    • /
    • 제4권2호
    • /
    • pp.137-147
    • /
    • 1994
  • This study was designed to identify and quantitate airborne isocyanate simultaneously by HPLC. These samples were collected using 1-(2-pyridyl)piperazine(1-2PP) coated glass fiber filter from polyurethane painting works at 8 wood furniture factories in Kimpo and Inchun. The results obtained were as follows : 1. The most suitable mobile phase condition of simultaneously analyzing isocyanates was 0.01 M ammonium acetate buffer ACN(70/30) adjusted to pH 6.2 from the beginning of the analysis to 20 min and 0.01 M ammonium acetate buffer/ACN(50/50) adjusted to pH 6.2 from 21 min to 40 min using the gradient mode. The peaks of isocyanates were able to obtain within 30 min. 2. The recovery efficiencies for 2,6-TDI, 2,4-TDI, HDI and MDI urea derivates spiked at the target concentration on coated glass fiber tillers were 91.00, 93.42, 91.31 and 94.21 %, respectively. 3. The qualitative analysis of the isocyanates samples from polyurethane spray painting works in wood furnture factories identified Ihree isocyanates, 2,6-TDI, 2,4-TDI and MOI. And their concentration ranges were 0-312.6, 0-56.3 and $0-62.1{\mu}g/m^3$, respectively. A disadvantage of using the colorimetric method for isocyanate analysis is its inability of separating isocyanates. This study identified such three isocyanates as 2,6-TDI, 2,4-TDI and MDI from polyurethane spray painting works in wood furniture factories. These isocyanates were successfully quantitated by HPLC by modifying the mobile phase condition and switching to gradient mode.

  • PDF

바이오매스 유래 이소소르비드를 이용한 폴리우레탄-우레아의 제조 및 특성 비교 (Preparation and Comparison the Physical Properties of Polyurethane-Urea Using Biomass Derived Isosorbide)

  • 박지현;박종승;최필준;고재왕;이재년;서석훈
    • 한국염색가공학회지
    • /
    • 제31권3호
    • /
    • pp.165-176
    • /
    • 2019
  • Polyurethane-ureas(PUUs) were prepared from 4,4'-methylenebis(cyclohexyl isocyanate) and various diols including isosorbide. Isosorbide is starch-derived monomer that exhibit a wide range of glass transition temperature and are therefore able to be used in many applications. PUU was synthesized by a pre-polymer polymerization using a catalyst. Successful synthesis of the PUU was characterized by fourier transform-infrared spectroscopy. Thermal properties were determined by differential scanning calorimetry, thermogravimetric analysis, and dynamic mechanical analysis. It was found that by tuning isosorbide content in the resin, their glass transition temperature(Tg) slightly decreased. Physical properties were also determined by tensile strength and X-ray diffraction. There is no significant differences between petroleum-derived diol and isosorbide in XRD analysis. Moreover, their physical and optical properties were determined. The result showed that the poly(tetramethylene ether glycol)/isosorbide-based PUU exhibited enhanced tensile strength, transmittance, transparency and biodegradability compared to the existing diols. After 11 weeks composting, the biodegradability of blends increased in ISB-PUU. The morphology of the fractured surface of blend films were investigated by scanning electron microscopy.

Poly(ethylene glycol)을 이용한 수분산 폴리우레탄 hydrogels의 제조와 물성 -EDA 및 DMPA함량의 영향- (Preparation and Properties of Waterborne Polyurethane-Urea Hydrogels Based on Poly(ethylene glycol): -Effect of EDA and DMPA Content-)

  • Kwak, Yong-Sil;Kang, Bo-Kyung;Kim, Han-Do
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.33-35
    • /
    • 2003
  • Over the last 30 years, water-swellable and water-insoluble hydrogels have been extensively investigated and developed, leading to a large family of materials which have found use in a wide range of biomedical applications such as carriers of soft tissues, wound healing, ophthalmological applications, membranes for artificial kidney, and materials for blood compatible and other medical devices[1-3]. (omitted)

  • PDF

Microbiologically - Enhanced Crack Remediation (MECR)

  • Bang Sookie S.;Ramakrishnan V.
    • 한국미생물학회:학술대회논문집
    • /
    • 한국미생물학회 2001년도 추계학술대회
    • /
    • pp.26-36
    • /
    • 2001
  • A novel approach of microbiologically-enhanced crack remediation (MECR) has been initiated and evaluated in this report. Under the laboratory conditions, Bacillus pasteurii was used to induce $CaCO_3$ precipitation as the microbial urease hydrolyzes urea to produce ammonia and carbon dioxide. The ammonia released in surroundings subsequently increases pH, leading to accumulation of insoluble $CaCO_3$. Scanning electron micrography (SEM) and x-ray diffraction (XRD) analyses evidenced the direct involvement of microorganisms in $CaCO_3$ precipitation. In biochemical studies, the primary roles of microorganisms and microbial urease were defined. Furthermore, the role of urease in $CaCO_3$ precipitation was characterized utilizing recombinant Escherichia coli that encoded B. pasteurii urease genes in a plasmid. Microorganisms immobilized in polyurethane (PU) polymer were applied to remediate concrete cracks. Although microbiologically- induced calcite precipitation enhanced neither the tensile strength nor the modulus of elasticity of the PU polymer, cement mortar whose crack was remediated with the cemaden polymer showed a significant increase in compressive strength. Through detailed investigation, MECR showed an excellent potential in cementing cracks in granite, concrete, and beyond.

  • PDF

H2O로 발포된 멜라민포스페이트-폴리우레탄폼 복합체 합성과 열적 특성 분석 (Synthesis of Melamine Phosphate-Polyurethane Composite Foam Blown by Water and Characterization of Its Thermal Properties)

  • 박경규;이상호
    • 폴리머
    • /
    • 제38권4호
    • /
    • pp.441-448
    • /
    • 2014
  • 멜라민포스페이트(MP)가 분산된 폴리우레탄폼 복합체(MP-PUF)를 만들고, MP-PUF의 모폴로지, 독립기포율, 열전도율, 열분해온도 등을 분석하였다. MP-PUF는 MP가 분산된 폴리아디페이트디올(f=2), 폴리에테르-폴리올(f=4.6)과 PMDI(f=2.5)를 원료로 사용하고 발포제로 $H_2O$ 양을 변화시키며 제조하였다. 폴리우레탄폼의 MP 함량은 $1.43{\pm}0.30wt%$로 고정하였다. $H_2O$의 양이 증가할수록 순수한 폴리우레탄폼(PUF)의 열전도율은 낮아지고 MP-PUF의 열전도율은 커졌다. PUF와 MP-PUF의 열안정성은 $H_2O$ 양이 5 php에서 최대가 되었다가 그 이상에서는 낮아졌다. 특히, MP-PUF는 발포과정에 생성된 우레아기와 MP의 영향으로 열안정성이 크게 향상되어 MP-PUF의 잔량이 50%가 되는 온도가 $370{\sim}450^{\circ}C$, 잔량이 30%가 되는 온도는 $700^{\circ}C$ 이상으로 PUF에 비하여 각각 25, $70^{\circ}C$ 이상 높아졌다.

고탄성 폴리우레탄 발포체의 기포개방 II. 폴리에테르형 기포개방제의 구조 영향 (Cell Opening of High Resilience Polyurethane foam II. Structure Effect of Polyether Type Cell Opener)

  • 송기천;이상목;이동호
    • 폴리머
    • /
    • 제26권2호
    • /
    • pp.218-226
    • /
    • 2002
  • 산화에틸렌 함량, 분자량 및 분자사슬의 구조가 다른 폴리에테르형 기포개방제를 사용하여 고탄성 폴리우레탄 발포체를 제조하고 이 때 기포개방제의 구조 변화가 계의 반응속도, 유변학적 성질, 발포체의 구조적인 안정성, 개방기포 함량 및 기계적인 성질 등에 미치는 영향을 조사하였다. 기포개방제의 산화에틸렌 함량 증가와 분자사슬에 에스테르 결합의 도입에 따라 우레아 생성 반응이 지연되었으나, 기포개방제의 분자량은 큰 영향이 없음을 관찰하였다. 유변학적 성질의 관찰로 기포개방제의 산화에틸렌 함량과 분자량의 증가에 따라 반응물의 점도와 저장탄성율의 감소를 확인하였고, 이 때 얻어진 발포체는 낮은 구조적인 안정성과 높은 개방기포 함량을 가졌다. 에스테르 결합이 도입된 기포개방제는 가장 낮은 점도와 저장탄성율을 나타내었고 제조된 발포체는 높은 개방기포 함량을 가졌으며, 또한 에스테르 결합에 의해 증가된 분자간 힘으로 인해 구조적인 안정성이 증가하였다 발포체의 경도, 인장강도, 인열강도, 신율은 기포개방제의 산화에틸렌 함량과 분자량의 증가에 따라 저하하였으나, 에스테르 결합이 도입된 기포개방제의 경우에는 우수한 인장강도, 인열강도, 신율을 나타내었다.