• Title/Summary/Keyword: Polystyrene-divinylbenzene

Search Result 37, Processing Time 0.023 seconds

The Properties of Porous and Non Porous Aminated Polystyrene Divinylbenzene Anion Exchanger (아민화된 다공성 및 비다공성 폴리스티렌 디비닐벤젠 음이온교환체의 성질)

  • Dong Won Kim;Jae Jick Oh;Tae Won Min
    • Journal of the Korean Chemical Society
    • /
    • v.29 no.3
    • /
    • pp.233-238
    • /
    • 1985
  • The non-porous and porous polystyrene divinylbenzene copolymers were prepared by the suspension polymerization method. The non-porous aminated polystyrene divinylbenzene, N-APSTDVB and the porous aminated polystyrene divinylbenzene, P-APSTDVB of 50∼100mesh size weakly basic anion exchanger were synthesized by chloromethylation followed by amination with methylamine. The functional groups of these synthesized anion exchangers were confirmed by their infrared spectra. The maximum capacity of these exchangers was 4.86meq/g. Pore volume and pore spectra were determined with a mercury porosimeter. The pore volume of P-PSTDVB increased with increasing X$_{diluent}$ at 30% of divinylbenzene. However, the pore volume of P-PSTDVB increased with increasing volume percent of divinylbenzene at constant mole fraction of diluent, X$_{diluent}$ of 0.5. The pore volume of synthesized copolymer and anion exchanger at 8% divinylbenzene and 0.5X$_{heptane}$ decreased as follows; P-PSTDVB 〉P-APSTDVB 〉N-PSTDVB. This result was attributed to the possibility that the pore volume were reduced by amination reactions. The distribution coefficients of boric acid on the N-APSTDVB anion exchanger in various concentrations of alcohol water solutions showed that as alcohol concentration increased, the distribution coefficients values decreased due to the reduced concentration of H$_2$BO$_3^-$.

  • PDF

Preparation of Cross-linked Asymmetric Membrane and Control of Its Morphology and Mechanical Property

  • Hong, Byung-Pyo;Ko, Moon-Young;Kwon, Byeong-Min;Byun, Hong-Sik
    • Korean Membrane Journal
    • /
    • v.10 no.1
    • /
    • pp.1-7
    • /
    • 2008
  • Polystyrene-co-divinylbenzene (PS-co-DVB) asymmetric membranes were prepared. In order to control their structure and mechanical properties the degree of cross-linking and the composition of casting solution were varied. The rubber added PS-DVB membranes was also prepared to overcome the mechanical limitation of cross-linked membrane, and their mechanical properties were investigated. It was revealed that the concentration of polymer in the casting solution affected the determination of skin formation. When the PS-co-DVB membrane consists of styrene-butadiene (SB) rubber or liquid polybutadiene (PBD), the structures formed showed that the PS content in the PS/DVB system played an important role in determining the porous sublayer structure.

Preparation of Silver/Polystyrene Beads via in Sito Reduction of Silver Alkylcarbamate Complex (은 알킬카바메이트 복합체의 환원에 의한 은/폴리스티렌 비드의 제조)

  • Lim, Tae-Ho;Jeon, Young-Min;Gong, Myoung-Seon
    • Polymer(Korea)
    • /
    • v.33 no.1
    • /
    • pp.33-38
    • /
    • 2009
  • Monodisperse polystyrene and its copolymer beads containing amine function were prepared for the electroless silver plating using reduction of silver alkylcarbamate complex in organic solvent. Soap-free emulsion polymerization was adopted for the polymerization of styrene, divinylbenzene (DVB), and 2-(N,N-dimethylamino) ethyl methacrylate (DAEMA) in the presence of poly (vinyl alcohol) in a water/methanol solvent. The resulting poly (styrene/DVB/DAEMA), containing 30/0$\sim$1.5/0$\sim$3 wt% in monomer composition, were found to be a sphere-type particle with diameter of 1 ${\mu}m$. Silver Ag-coated polystyrene beads were prepared by in sito reduction of a silver 2-ethylhexylcarbamate (Ag-EHCB) complex solution with hydrazine without pretreatment of polystyrene beads. Robust Ag/polystyrene beads were analyzed by SEM, UV -visible spectrometer and XRD.

Preparation and Structure of the Synthetic Polymeric Membranes based on Polystyrene and Poly(sodium 4-styrene sulfonate) (Polystyrene과 Poly(sodium 4-styrene sulfonate)를 이용한 합성 고분자 분리막의 제막 및 구조)

  • 변홍식;탁태문
    • Membrane Journal
    • /
    • v.6 no.4
    • /
    • pp.273-283
    • /
    • 1996
  • A cation-exchange membranes were prepared by polystyrene and poly(sodium 4-styrene sulfonate). The degree of crosslinking of polystyrene membranes was controlled by DVB. At the same time, the structure of PS membranes was changed from RO to MF by varying the concentration of PSS in the casting solution. Water flux increased with PS-PSS membranes due to the sulfonate groups, and final membrane cast from the solution containing 5% of DVB and 3% of PSS showed MF structure.

  • PDF

Polystyrene Microgel with Maltohexaose. Synthesis and Potential Application for Fullerene-Coating on Hydrophilic Surface

  • Narumi, Atsushi
    • Proceedings of the Polymer Society of Korea Conference
    • /
    • 2006.10a
    • /
    • pp.318-318
    • /
    • 2006
  • 4-Vinylbenzyl maltohexaoside peracetate, 1, was copolymerized with divinylbenzene using the initiator for nitroxide-mediated living radical polymerization, 2, to afford the polystyrene microgel with acetyl maltohexaose, 3. The deacetylation of 3 was achieved by treatment with sodium methoxide in dry 1,4-dioxane to produce the polystyrene microgel with maltohexaose, 4. A good coating property of the polystyrene microgel was combined with an excellent hydrophilic property derived from maltohexaose. In addition, 4 showed the ability to solubilize fullerene in aqueous solution. Therefore, 4 has a potential application as a special coating using functional but incompatible compounds such as fullerene on the surface of various hydrophilic materials.

  • PDF

Development of Capillary Columns for Ion Chromatography (이온 크로마토그래피용 모세관 컬럼의 개발)

  • Kim, Ho-Hyun;Pyo, Dong-Jin
    • Analytical Science and Technology
    • /
    • v.12 no.6
    • /
    • pp.521-527
    • /
    • 1999
  • In this study, capillary columns for ion chromatography were developed to analyze trace amount of ions in samples. When small I.D. capillary columns are used in ion chromatography, the typical flow rate of the mobile phase is $5{\sim}15{\mu}L/min$ and the typical column length is 50~150 mm. The capillary columns were made using RSL-300 fused silica capillary(I.D.: 0.53 mm, O.D.: 0.67 mm) and AG14 column resin(support : polystyrene-divinylbenzene, functional group : alkyl quaternary ammonium). The new conductivity cell and suppressor were also developed and made for capillary column ion chromatography. When several anions (fluoride, nitrite, nitrate, chlorate) were analyzed using these capillary columns, reproducible and good chromatograms were obtained.

  • PDF

Transport of Organic Acids through Porous Sulfonated Polystyrene Divinylbenzene Copolymer Membranes (다공성 술폰화 폴리스티렌-디비닐벤젠 공중합체 분리막을 통한 유기산의 이동)

  • 이광재;한정우;조영일
    • Membrane Journal
    • /
    • v.1 no.1
    • /
    • pp.44-54
    • /
    • 1991
  • Sulfonated polystyrene-divinylbenzene(PS-DVB) copolymer membranes were prepared using different diluents (toluene, cyclohexane, cyclohexanol), various diluent ratio and DVB contents. And initial fluxes of organic acids were investigated by varying pH and initial concentration. As a results, water content and ion-exchange capacity decreased with increasing DVB concetration. Among used diluents, cyclohexanol was the most efficient for building up the highest water content and ion-exchange capacity. In the experiment of permeation, carboxylic acid such as formic acid and acetic acid showed higher fluxes when pH was lower than pKa and amino add such as L-alanine showed minimum flux when pH was isoelectric value. The relationaship between initial fluxes and initial concentrations has been expressed by saturation kinetics.

  • PDF

Preparation and Structure of Synthetic Polymeric Membranes based on polystyrene and Poly(sodium4-styrenesulfate) (Polystyrene과 Poly(sodium4-styrenesulfonate)를 이용한 합성 고분자분리막의 제조 및 구조)

  • 변홍식;탁태문
    • Proceedings of the Membrane Society of Korea Conference
    • /
    • 1995.04a
    • /
    • pp.28-29
    • /
    • 1995
  • 분리막의 고유기능인 분리기능 뿐 아니라 에너지의 절약을 위하여 분리막공정의 활용은 화학산업 전반에 걸쳐 급격히 신장되고 있다. 따라서 분리막의 효율적인 이용을 위한 연구가 활발히 진행되고 있으며, 특히 분리막 공정의 활용범위를 제한하고 있는 단점(fouling)에 대한 연구를 중심으로 분리막의 소재개발 및 이미 개발되어 잇는 소재의 변형을 통하여 분리막의 응용 범위를 넓혀가고 있다. 본 실험에서는 새로운 소재를 개발하고, 개발된 소재를 토대로 변형공정 및 분리막제조 공정의 변화를 첨가하여 최종 분리막의 구조를 관찰하였다. 또한 분리막의 성능에 대한 변형 공정의 영향을 조사하였다. 분리막의 소재로써 PS(polystyrene)을 채택하였으며, DVB(divinylbenzene)을 이용하여 UV 중합으로 기공의 조절을 시도하였고, 변형공정으로 sulfonation을 하였다. 또한 고분자 열중합으로 PSS[poly(sodium4-styrnesulfate)] 분리막을 제조하였으며, 변형공정에 따른 분리막 구조의 변화를 관찰하고 규명하였다.

  • PDF

Polymer-Supported Crown Ethers(Ⅳ) Synthesis and Phase-transfer Catalytic Activity

  • Shim Jae Hu;Chung Kwang Bo;Masao Tomoi
    • Bulletin of the Korean Chemical Society
    • /
    • v.13 no.3
    • /
    • pp.274-279
    • /
    • 1992
  • Immobilization method of lariat azacrown ethers, containing hydroxyl group in the side arm of crown ring, on the polymer matrix and the phase-transfer catalytic activity of thus obtained immobilized lariat azacrown ethers were studied. Polystyrene resins with crown ether structures and hydroxyl groups adjacent to the macrorings were prepared by the reaction of crosslinked polystyrene resins containing epoxy groups with monoaza-15-crown-5 or monoaza-18-crown-6. Microporous crosslinked polystyrene resins containing epoxy group for the syntheses of these immobilized lariat crown catalysts were prepared by suspension polymerization of styrene, divinylbenzene (DVB 2%) and vinylbenzylglycidyl ether. The immobilized lariat catalysts with 10-20% ring substitution exhibited maximal activity for the halogen exchange reactions of 1-bromooctane with aqueous KI or NaI under triphase heterogeneous conditions. Immobilized catalyst exhibited higher activity than corresponding catalyst without the hydroxyl group and this result was suggested that the active site have a structure in which the $K^+$ ion was bound by the cooperative coordination of the crown ring donors and the hydroxyl group in the side arm.

Development of Optically Active Chelate Resin for Direct Resolution of Enantiomers(III)-Synthesis of Copper(II) L-Proline Chelate Resin and Resolution of Enantiomers- (Enantiomer의 분리에 이용될 수 있는 Chelate Resin의 개발(제 3보)-Copper(II) L-Proline Chelate Resin의 제조 및 Enantiomer 분리-)

  • Kim, Kil-Soo;Jeon, Dong-Won
    • Journal of Pharmaceutical Investigation
    • /
    • v.19 no.3
    • /
    • pp.117-121
    • /
    • 1989
  • A metal complex, copper (II) L-proline was chemically bound to ethylene glycol dimethacrylate and divinylbenzene crosslinked chloromethylated polystyrene and they were used as chiral chelate resin matrix for column chromatography to resolve enantiomers of DL-amino acids. The L-enantiomers eluted first and the degree of resolution on the polymer crosslinked with ethylene glycol dimethacrylate was superior to the polymer crosslinked with divinylbenzene.

  • PDF