• 대한화학회지
• /
• 제17권4호
• /
• pp.298-305
• /
• 1973

Roll을 사용한 mastication에 의한 polystyrene(단독시와 rubber와의 blend시)의 기계적 분열에 대하여 검토한 결과는 다음과 같다. 1) Polystyrene 단독시의 기계적 분열속도는 Goto가 밝힌 중합도$(P_t-P_{\infty})$에 관하여 2차인 다음식에 적합함을 알았다. $-\frac{dP_t}{dt} = k_s(P_t-P_{\infty})^2$2 2)Polystyrene-rubber (SBR, BR) blend계에서 polystyrene성분의 분열은 단독시와 비스하게 일어났다. 3)본 실험 조건하에서 polystyrene-rubber (SBR, BR) blend계에서, polystyrene성분의 분열속도도 단독시와 같이 상기한 2차식에 근사적으로 적합됨을 알았다.

• 통합자연과학논문집
• /
• 제3권3호
• /
• pp.138-142
• /
• 2010

Polystyrene thin films containing Bragg structures have been successfully obtained by the removal of DBR porous silicon films from the DBR structured porous silicon/polystyrene composite film in HF/$H_2O$ mixture solution and by replicating the nano-structures of porous silicon containing Bragg structure. Polystyrene thin films containing Bragg structures displayed unique optical reflection resonances in optical reflection spectrum. This optical reflection band was resulted from the interference of reflection wavelength at Bragg structure of polystyrene thin films. The wavelength of reflection resonances could be modified by the change of Bragg structure of the master. Polystyrene thin films containing Bragg structures were flexible and maintained their optical characteristics upon bending. The Polystyrene thin films replicate the photonic features and the nanostructure of the master.

• 한국환경과학회:학술대회논문집
• /
• 한국환경과학회 2020년도 정기학술대회 발표논문집
• /
• pp.208-208
• /
• 2020

The aim of this study was to investigate changes in the weight of Zophobas morio larvae and mass of polystyrene foam when the larvae were fed polystyrene for 27 days. Fourier-transform infrared (FTIR) spectrometry was used to determine whether the polystyrene was broken down by the larvae. Forty Z. morio larvae (four replicates with 10 larvae per replicate) were reared in a chamber under controlled conditions with polystyrene foam blocks as their sole diet. The weight of the Z. morio larvae and mass of the polystyrene foam decreased as a function of time. The average weight of the larvae and mass of the polystyrene foam blocks decreased by 16.3 and 6.5%, respectively, over the 27-day period. The FTIR spectrum of Z. morio larvae fed with polystyrene foam did not reveal the unique peaks associated with polystyrene. In conclusion, this study suggests the possibility of using Z. morio larvae as a management technology for degrading waste plastics without a negative environmental effect. Key words : FTIR spectra, plastic biodegradation, polystyrene foam, Zophobas morio larvae.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.362-367
• /
• 1998

The purpose of this study is to examine the influences of polystyrene content and St/UP on the setting shrinkage and strengths of polymer mortar with waste expanded polystyrene resin as a shrinkage-reducing agent, and to recommend the optimum binder formulations for product of low-shrinkage polymer mortar. In this paper, polymer mortar is prepared with waste expanded polystyrene content and St/UP, and tested for setting shrinkage, flexural and compressive strengths. From the test results, irrespective of increasing of waste expanded polystyrene resin, the strengths reduction of polymer mortar with waste expanded polystyrene(EPS) resin is not recognized. And the setting shrinkage is reduced with EPS resin content. The waste expanded polystyrene resin as a shrinkage-reducing agent can be used in the same manner as commercial polystyrene resin. In this study, we can obtain the optimum mix proportions of polymer mortar using EPS resin.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.306-316
• /
• 2009

In this study, block copolymer of polystyrene and polyethylene glycol methyl ether methacrylate(PEGMA) by ATRP(atom transfer radical polymerization) method was synthesized. 4 arm-molecule which contained halogen atom was synthesized for an initiator. With 4 arm-molecule monodispered polystyrene were synthesized by ATRP method. The molecular change of synthesized monodispersed polystyrene with respect to time was investigated and living polymer characteristic was confirmed. Block copolymer of polystyrene and polyethylene glycol methyl ether methacrylate(PEGMA) was synthesized by ATRP with macroinitiator which was synthesized from the monodispersed polystyrene(Mn=12000). The molecular weight of obtained PS-b-PEGMA was 22,000.

• 대한화학회지
• /
• 제19권5호
• /
• pp.386-393
• /
• 1975

Roll을 사용한 mastication에 의한 polystyrene(단독시와 SBR과의 blend시)의 기계적분열에 대하여 검토한 결과 다음과 같은 결론을 얻었다. 1. Polystyrene-SBR blend계에서 polystyrene 성분의 MWD는, original polystyrene속에 존재하는 고분자량의 polymer 분자가 기계적으로 절단되어 소멸하여 보다 낮은 분자량의 polymer 분자를 생성하며, 분포곡선의 정점은 분열이 진행함에 따라 저분자량역으로 이동하고 점차 높은 정점을 가지는 폭이 좁은 곡선으로 되어 최종적으로 비교적 균일한 polymer로 됨을 실증하였다. 2. Polystyrene chain의 절단수는 roll에 의한 mastication time이 길어짐에 따라 증가하였고, 140, 150 alc $160^{\circ}C$에서 각각 100분간 mastication시킨 처리물에서는 $2.36{\times}10^{20}개,\;1.76{\times}10^{20}개\;및\;1.52{\times}10^{20}$개의 분열 polymer가 생성하였다. 3. Polystyrene의 mechanical degradation의 분열속도는 온도가 상승함에 따라 감소되었고, -8.7kcal/mole이란 부(負)의 활성화에너지를 나타내었으며, 따라서 이 경우의 mechanical degradation은 활성화에너지를 기계적으로 공급받는 화학적 process임을 실증하였다.

• Korea-Australia Rheology Journal
• /
• 제13권2호
• /
• pp.83-87
• /
• 2001

The morphology and mechanical properties of the blends of a syndiotactic polystyrene (SPS) and poly-styrene-block-poly(ethylene-co-butylene)-block-polystyrene copolymers (SEBS) with various polystyrene block contents are studied. Mechanical properties, especially elongation at break and impact strength (IS), of the blend depend upon the morphology and interfacial adhesion, which in rum are affected by the viscosity ratio of constituent components and the styrene block content in SEBS. The IS of a blend was affected by the combined effect of rubber content and the interfacial adhesion. A maximum IS was found for a blend with the weight fraction of the PS block in an SEBS of 0.18. The IS of blends with smaller weight fractions of the PS block exhibited lower due to poor interfacial adhesion between SPS/SEBS in spite of a larger amount of rubber block. On the other hand, the IS of blends with larger weight fraction of the PS block becomes smaller due to lower amounts of rubber block in spite of better interfacial adhesion.

• Macromolecular Research
• /
• 제12권4호
• /
• pp.384-390
• /
• 2004

Single-walled carbon nanotubes (SWNTs) have been chemically modified through the formation of carboxylic acid functionalities or by grafting octadecylamine and polystyrene onto them. We purified SWNTs with nitric acid to remove some remaining catalysts and amorphous carbon materials. After purification, we broke the carbon nanotubes and shortened their lengths by using a 3:1 mixture of concentrated sulfuric acid and nitric acid. During these purification and cutting processes, carboxylic acid units formed at the open ends of the SWNTs. Octa-decylamine and amino-terminated polystyrene were grafted onto the cut SWNTs by condensation reactions between the amine and carboxylic acid units. The cut SWNTs did not disperse in organic solvents, but the octadecylamine-grafted and polystyrene-grafted SWNTs dispersed well in dichloromethane and aromatic solvents (e.g., benzene, toluene). Composites were prepared by mixing polystyrene with the octadecylamine-grafted or polystyrene-grafted SWNTs. Each composite had a higher dynamic storage modulus than that of a pristine polystyrene. The composites exhibited enhanced storage moduli, complex viscosities, and unusual non-terminal behavior when compared with a monodisperse polystyrene matrix because of the good dispersion of carbon nanotubes in the polystyrene matrix.

• 대한환경공학회지
• /
• 제22권6호
• /
• pp.1063-1072
• /
• 2000

본 연구에서는 열중량 분석법을 이용하여 희분식 반응기에서 승온속도를 0.5, 1.0 및 $2.0^{\circ}C/min$로 변화시키면서 폐용활유와 polystyrene 혼합물의 열분해반응 속도실험을 수행하였다. 미분법을 이용하여 폐윤활유/polystyrene 혼합물의 열분해 전환율이 1%에서부터 100%일때까지의 활성화에너지 및 반응차수를 구하였다. 폐윤활유와 polystyrene을 혼합하여 열분해할 경우 각각을 열분해할 때보다 낮은 온도에서 열분해반응이 진행되었으며 열중량 변화곡선의 기울기변화는 크게 두 부분으로 구분되었다. 폐윤활유/polystyrene 혼합물의 열분해 생성 오일의 탄소수를 분석했을 때 styrene 단량체와 이량체에 해당하는 탄화수소화합물의 선택성이 매우 높게 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.793-798
• /
• 2003

The purpose of this study is to investigate the setting properties of polystyrene mortars using waste expanded polystyrene(EPS) solution-based binders. The binders for polystyrene mortars are made by mixing crosslinking agent with waste EPS solutions which prepared by dissolving EPS in styrene. Polystyrene mortars are prepared with various EPS concentrations of EPS solutions and crosslinking agent contents, subjected to a dry curing, and tested for working life, peak exotherm temperature and 10h-length change. From the test results, the working lives of polystyrene mortars are shortened with raising EPS concentration of EPS solution and crosslinking agent content. Low-shrinkage or non-shrinkage of polystyrene mortars should be accomplished by adjusting EPS concentration of EPS solution and crosslinking agent content.