• 한국염색가공학회지
• /
• 제33권3호
• /
• pp.113-119
• /
• 2021

Polypropylene fiber has the advantages of light weight, heat retention and antibacterial properties, but it is difficult to expand its market because it cannot be dyed or imparted functionality due to its hydrophobic properties. Atmospheric pressure plasma processing can modify the surface of the fiber and create polar functional groups on the surface of the fiber. In this study, an experiment was conducted on the hydrophilization of the ultra-hydrophobicity of polypropylene through plasma processing and surface changes before and after plasma processing. The ultra-hydrophobicity of polypropylene is the cause of impossible for dyeing and imparting functionality. Untreated polypropylene became hydrophilic, and it was confirmed that the ratio of oxygen and carbon(O/C) increased about 11 times from untreated polypropylene 0.017 to plasma-treated polypropylene 0.190.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.495-500
• /
• 2003

UV-induced graft polymerization of glycidyl methacrylate (GMA) to a polypropylene (PP) membrane was carried out in the vapor phase with benzophenone (BP) as a photoinitiator. Attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to characterize the copolymer. The degree of grafting increased with increasing reaction time, increased UV irradiation source intensity, and increased immersion concentration of the BP solution. The optimum synthetic condition for the PP-g-GMA membrane was obtained with a reaction time of 2 hrs, a UV irradiation source intensity of 450 W, and an immersion concentration of the BP solution of 0.5 mol/L. The pure water flux decreased upon increasing the degree of grafting and increasing the amount of diethylamino functional group introduced. The analysis of AFM and SEM images shows that the graft chains and diethylamino groups of PP-g-GMA grew on the PP membrane surface, resulting in a change in surface morphology.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.134-137
• /
• 1995

Studies on the formulations of the additives such as antioxidants, crosslinking agent, and trans-stilbeneoxide (StO) with polypropylene (PP) have been carried out to improve the resistance of gamma radiation sterilization. The irradiated PP and ethylene-propylene copolymers samples with control and additives were characterized by mechanical tester, colorimetry, and Fourier transform infrared spectroscopy with total attenuated reflectance mode (FTIR-ATR). Crosslinking agent and StO formulated PP showed remarkable radiation resistance and minimum discoloration. Also, radiation resistance of ethylene propylene copolymers with 3% of ethylene contents was better than that of PP homopolymers in the case of no additives. The proposed mechanisms of radiation stabilization with additives are also discussed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.124-125
• /
• 2017

In this study, the spalling properties of Polypropylene reinforced concrete were evaluated by the restrained ring-type test. As a result of the experiment with the fiber mixture ratio set at 0, 0.15 vol.%, The PP fiber reinforced specimen showed lower water vapor pressure as a whole than the Plain specimen, but the restraint stress was measured to be higher. This is thought to be due to the fact that higher thermal stresses were applied in the PP fiber reinforced test specimen.

• 폴리머
• /
• 제24권6호
• /
• pp.763-769
• /
• 2000

E-beam 전조사법을 이용하여 아크릴산과 스틸렌 단량체를 폴리프로필렌 섬유에 그라프트 반응시켜 PP-g-(AAc/Sty) 공중합체를 합성하고 술폰화 반응시켜 다관능성 섬유상 양이온 교환체를 합성하였다. 합성체의 그라프트율은 물과 메탄올 혼합비가 30 : 70 vol%인 혼합용매에서 아크릴산과 스틸렌, 단량체비가 30 : 70 vol%일 때 190%로 최대이었으며 혼합용매의 조성비가 일정할 때 아크릴산 단량체의 양이 증가할수록 그라프트율은 감소하였다. 또한 이온교환체의 이온교환용량은 4.6 meq/g이었으며, 술폰화 이온교환체와 아크릴산 이온교환체의 리튬이온에 대한 흡착량을 비교한 결과 본 연구에서 합성한 이온교환체의 흡착성이 우수한 것으로 나타났다.

• 접착 및 계면
• /
• 제9권4호
• /
• pp.24-29
• /
• 2008

두 종류의 천연섬유, 즉 면섬유와 목분을 이용하여 폴리프로필렌 - 천연섬유 복합재료를 제조하고 혼합가공시 유변학적 특성과 열적특성을 고찰하였다. PP/천연섬유 복합재료에서 천연섬유의 함량이 증가함에 따라 토오크 값이 상승하였고, 면섬유의 경우 낮은 체적 밀도로 인해 목분 복합재료보다 높은 토오크값을 나타내었다. PP의 MI에 따라서는 낮은 MI의 PP/천연섬유 복합재료에서 더 높은 토오크값이 관찰되었다. X-선 회절분석과 시차주사열분석을 통해 천연섬유의 함량이 증가될수록 PP/천연섬유 복합재료의 결정화온도는 상승하나 결정화도는 감소함이 확인되었다.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.410-417
• /
• 2011

Effects of ethylene-propylene diene monomer (EPDM)/polypropylene (PP), zinc oxide, stearic acid, and clay on the combustive properties based on EDPM/PP were investigated. The EDPM/PP/clay nanocomposites was compounded to prepare specimen for combustive analysis by cone calorimeter (ISO 5660-1). It was found that the specific mass loss rate (SMLR) in the nanocomposites decreased due to the fire resistance compared with unfilled EDPM/PP, while the nanocomposites showed the higher total heat release (THR), higher CO production release, and higher specific extinction area (SEA) than those of virgin EPDM/PP. The stearic acid for softening ruber increased the THR and amount of smoke by itself, combustible.

• Carbon letters
• /
• 제11권4호
• /
• pp.311-315
• /
• 2010

In this work, the effect of glycidyl methacrylate grafted multi-walled carbon nanotubes (GMA-MWCNTs) on the viscoelastic behaviors of polypropylene (PP) based nanocomposites was studied. The GMA-MWCNTs/PP was prepared using a bravender at $200^{\circ}C$ by melt mixing as a function of GMA-MWCNT content. The viscoelastic behaviors of GMA-MWCNTs/PP nanocomposites were measured by a rheometer. It was found that the GMA-MWCNTs were homogeneously dispersed in the PP matrix. The GMA-MWCNTs/PP nanocomposites showed higher storage modulus, loss modulus, and shear viscosity compared to pure PP nanocomposites and the maximum value was shown at 2.0 wt% GMA-MWCNTs loading. These results were probably attributed to the strong interfacial interaction between the GMA-MWCNT and the PP matrix.

• 접착 및 계면
• /
• 제2권4호
• /
• pp.24-31
• /
• 2001

용융 흐름성이 다른 폴리프로필렌(Polypropylene, PP)을 에틸렌-프로필렌 고무(EPR) 또는 에틸렌-프로필렌-디엔 단량체 고무(EPDM) 및 카르복실산 그룹을 갖고 있는 에틸렌 공중합체와 이축 압출기로 용융 혼합한 후 사출성형으로 고분자 블렌드 시편을 제조하였다. 제조된 블렌드의 기계적 특성과 시편의 두께 방향에 따른 모폴로지 변화를 조사하였으며 적외선 분광법(ATR-IR)을 이용하여 표면에서의 카르복실산 그룹의 상대적 피크 크기를 비교하였다. 단면의 모폴로지 조사에서 중앙부에는 PP 연속상에 고무 도메인이 골고루 혼합되어 있지만 표면쪽은 PP가 층을 이루고 있는 경사구조가 관찰되었다. PP의 흐름성이 클수록 블렌드의 인장강도 및 충격강도가 작아졌으며 EPR보다 EPDM을 고무성분으로 사용한 PP계 블렌드가 PP의 흐름성에 대한 영향을 적게 받았다. 또한 PP의 흐름성이 클수록 카르복실산 그룹이 표면에 많이 존재하였다.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4261-4266
• /
• 2011

폴리프로필렌(polypropylene, PP)/talc 컴파운드를 talc의 조성을 20wt%로 하여 마스터뱃취(master-batch, MB)와 사출기를 이용한 직접 제조법으로 각각 제조하였다. MB는 talc 함량을 50wt%로 하여 소형 혼합기(mini compounder)로 $200^{\circ}C$에서 제조하였다. SEM-EDS를 이용하여 PP/talc 컴파운드의 talc 분산정도를 평가하였다. MB를 이용하여 제조한 컴파운드의 talc 분산성이 우수하게 나타났다. PP/talc 컴파운드의 유변학적 특성을 동적유변측정기를 이용하여 측정하였다. MB를 이용한 MB-PP 컴파운드가 직접 제조한 컴파운드보다 shear thinning과 탄성특성이 증가하였다. G'-G" plot의 기울기 변화로부터 talc 분산성 정도를 확인하였고, 탄성특성 증가를 확인하기 위해 Van Gurp-Palmen 분석을 이용하였다.