• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1199-1204
• /
• 2004

Most overhead transmission lines in Korea run over the mountain; however, only little study has been made for the effect of mountain fire on polymeric insulator for transmission lines, though the study is significantly required, Therefore, in this study, the authors observed the deformation of the sheds of the insulator under fire, varying the ignition time using artificial ignition testing equipment, and investigated electrical and mechanical characteristics of the insulator through dry withstand voltage test, impulse flashover test and tensile load test. As the results of the tests, the following conclusions were obtained, First, when the insulator was subjected to the fire, the electrical characteristics were slightly reduced, but there was no change on the mechanical characteristics, Secondly, the sheds and sheath of the insulator were not non-flammable but less-flammable. These two results show the high mechanical stability and durability of the insulator under severe fire condition, though the electrical characteristics can be deteriorated as the time that the insulator is subjected to fire, goes by.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.469-472
• /
• 2004

There have been numerous accelerated aging laboratory tests for evaluating suitability of polymeric materials and devices. Aging test for materials and its full scale device has been conducted, but poor correlation of aging test such as service experience were observed. Service experience plays a key role in the utility section of composite insulators. A meaningful and reliable accelerated aging test is needed for evaluating composite insulator. During the service these insulators are subjected to aging stress such as humidity, pollution, and electrical field, and erosion and tracking of the weathershed occurs. This paper presents the criteria of reliability evaluation and evaluation facilities for 22.9 kV suspension composite insulator. We adopt the criteria of reliability evaluation consist of two test methods. One is CEA tracking wheel test for examining the tracking and erosion performance of composite insulator. The other is multi-stress aging test for examining effects of environmental factors such as UV, temperature, humidity, etc on composite insulator.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.429-432
• /
• 2004

The demand for electric power keeps growing, and tends to be more effective. Polymer insulators have been manufactured for almost twenty years and the excellent insulation performance of polymer insulators is attractive. Polymeric materials are now widely used as a replacement for inorganic materials such as porcelain or glass for the outdoor insulation of high voltage insulation. GFRP has been used widely as a core materials for polymer insulators. This paper reports the mechanical properties of GFRP for insulators. The bending strength was simulated and evaluated according to the winding angle. The fiber orientation in GFRP has a great effect on the strength of GFRP because the strength of GFRP mainly depends on the strength of fiber. Results of simulated and evaluated strength of GFRP were compared each other. The simulated strength of GFRP rod was different from the evaluated strength. It was caused that the shear stress had a great effect on the strength of GFRP although the stress of parallel direction of GFRP was much higher.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.455-456
• /
• 2007

Optically transparent, highly conductive coating have been major theme of thin film science efforts for some years. In this work, t-MWNT(thin Multi-walled Carbon Nanotubes) are acid treated, then the stable dispersion of t-MWNTs in polar solvent such as alcohols, was achieved by sonication. The transparent conducting films are prepared using the one component solution of t-MWNT/epoxy binder via spray coating on glass substrate. The characterization of acid treated t-MWNTs was performed by Raman spectrometer. The opto-electrical properties of conducting films are analyzed by the binder concentration, and the effect of co-solvent on the compatibility and dispersibility of one component t-MWNT/epoxy binder solutions are discussed.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 1997년도 International Symposium on Fire Science and Technology
• /
• pp.104-111
• /
• 1997

Cluster systems are microcrystals of vanadiumoxided compounds such as Barium, Calcium or Sodium Metavanadates or Sodium Vanadium Bronze which are distributed into dimethyl- or diethylphosphites or microcrystals of vanadium oxides, for instance, vanadium oxide (+3), distributed into the methylphosphonic acid melted. During the interaction of vanadium compounds with the correspondent phosphororganic substances biue viscous liquids are formed. These liquids have paramagnetic properties. According to the UV and IR spectroscopic investigations as well as the results of EPR spectra the substances obtained consist of the nucleus containing 6 to 12 of vanadium atoms and the shell including ligands which are molecules of phosphites or methylphosphonic acid. Here every atom of vanadium interacts with four of phosphorus containing molecules. Sizes of the particles in these systems donot exceed 200 nm. Introduction of cluster systems (0,1 -0,3 % vanadium) into epoxy compositions before the introduction of curing agent - polyethylenepolyamine 6 -8 % leads to the acceleration of composition crosslinking and to the combustion decreasing: 1) Oxygen Index grows to 35: 2)mass losses during combustion decrease to 1-2%, 3) combustion time does not exceed 1 s; 4) the intumescence of material sample is being observed during the burner action as well as the foam coke formation.

• Structural Engineering and Mechanics
• /
• 제67권2호
• /
• pp.125-130
• /
• 2018

This study deals with buckling analysis with stretching effect of functionally graded carbon nanotube-reinforced composite beams resting on an elastic foundation. The single-walled carbon nanotubes (SWCNTs) are aligned and distributed in polymeric matrix with different patterns of reinforcement. The material properties of the CNTRC beams are estimated by using the rule of mixture. The significant feature of this model is that, in addition to including the shear deformation effect and stretching effect it deals with only 4 unknowns without including a shear correction factor. The equilibrium equations have been obtained using the principle of virtual displacements. The mathematical models provided in this paper are numerically validated by comparison with some available results. New results of buckling analyses of CNTRC beams based on the present theory with stretching effect is presented and discussed in details. the effects of different parameters of the beam on the buckling responses of CNTRC beam are discussed.

• 한국전기전자재료학회논문지
• /
• 제34권4호
• /
• pp.262-268
• /
• 2021

For the past several decades, various next-generation patterning methods have been developed to obtain well-designed nano-to-micro structures, such as imprint lithography, nanotransfer printing (nTP), directed self-assembly (DSA), E-beam lithography, and so on. Especially, nTP process has much attention due to its low processing cost, short processing time, and good compatibility with other patterning techniques in achieving the formation of high-resolution functional patterns. To transfer functional patterns onto desirable substrates, the use of soft materials is required for precise replication of master mold. Here, we introduce a simple and practical nTP method to create highly ordered structures using various polymeric replica materials. We found that polymethyl methacrylate (PMMA), polystyrene (PS), and polyvinylpyridine (PVP) are possible candidates for replica materials for reliable duplication of Si master mold based on systematic analysis of pattern visualization. Furthermore, we successfully obtained well-defined metal and oxide nanostructures with functionality on target substrates by using replica patterns, through deposition and transfer process. We expect that the several candidates of replica materials can be exploited for effective nanofabrication of complex electronic devices.

• Advances in materials Research
• /
• 제12권2호
• /
• pp.119-131
• /
• 2023

The development of sustainable composites materials, from recycled polymeric materials and waste from the wood industry and stone processing, allows reducing the volume of these by-products, minimizing impacts on health and the environment. Nowadays, Polypropylene (PP) is the most recycled polymer in industry, while the furniture industry has increasingly used timber felled from sustainable forest plantations as a eucalypt. The powder tailing from the ornamental stone extraction and processing industry is commonly disposed of in the environment without previous treatment. Thus, the technological option for the development of composite materials presents itself as a sustainable alternative for processing and manufacturing industries, enabling the development of new materials with special technical features. The results showed that powder granite particles may be incorporated into the polypropylene matrix associated with short eucalyptus fibres forming green hybrid composites with potential application in structural engineering, such as transport and civil construction industries.

• Composites Research
• /
• 제12권5호
• /
• pp.31-39
• /
• 1999

최근에 플라스틱 복합재료는 고강도, 초경량이라는 재료의 우수한 성질과 높은 생산성으로 인해서 그 활용도가 급속히 증가하고 있고, 그 중 섬유강호 플라스틱 복합재료는 가장 각광받는 재료중 하나이다. 본 연구에서는 연속섬유강화 플라스틱 복합재료를 열간 압축성형법을 이용하여 성형조건을 변화시켜 성형한 후 성형품의 성형성에 대하여 연구하였다. 연속섬유강화 플라스틱 복합재료를 압축 성형할 때 발생하는 문제점은 유동 속도차에 의한 섬유와 모재간의 분리현상이다. 이 분리현상으로 인해 성형품은 불균질해지고 이방성이 되어 기계적 특성 등에 영향을 받는다. 그러므로 분리에 영향을 미치는 섬유구조 및 기하하적 형상 등 성형조건을 연구할 필요가 있다. 니들펀칭 횟수 NP=0 punches/$\textrm{cm}^2$인 경우 성형시 모재와 강화재간의 분리현상이 증가하여 성형품의 성형성에 큰 영향을 미친다. 또한 펀치의 반경 rp=1mm일 경우 압축성형에 의한 큰 형상변화에 의하여 역시 분리현상이 증가한다. 본 논문에서는 성형공정 인자들이 제품의 성형성에 어떠한 영향을 미치는지 알아보기 위하여 연속섬유강화 플라스틱 복합재료를 니들펀칭 횟수를 변화시켜 복합판을 제작한 후, 펀치의 반경을 변화시켜 고온 압축성형 하였을 때 일어나는 불균질도와 성형품의 두께를 측정하여 비교하고, 이에 미치는 금형 코너부의 반경 및 니들펀칭 횟수의 영향에 대해서 검토한 결과를 보고한다.

• 멤브레인
• /
• 제27권2호
• /
• pp.154-166
• /
• 2017

식품 포장, 전자 기기 등에 활용되고 있는 고분자 기반 기체 차단성 필름은 경량성, 낮은 제조 원가, 높은 가공성으로 인하여 많은 주목을 받고 있다. 특히 전자기기에 활용되기 위하여, 기체 차단 필름은 매우 높은 수준의 기체 차단성을 요구받고 있다. 하지만 현재 수준의 고분자 기반 기체 차단 필름은 다른 소재와 비교하여 상대적으로 높은 수준의 기체 투과유량을 보이고 있다. 따라서 기존의 고분자 필름이 가지고 있는 장점을 유지하면서 더 높은 수준의 기체 차단성을 부여하기 위한 요구가 증대되고 있다. 최근 그래핀 소재는 기체 차단을 위한 2차원 소재로서 각광받고 있다. 그러나 그래핀 소재의 낮은 가공성과 어려운 대면적화 문제 때문에 산화그래핀이 그 대안으로서 떠오르고 있다. 산화그래핀은 높은 종횡비를 가지는 2차원 층상구조의 그래핀에 산소관능기를 함유한 형태로서, 수용성 혹은 극성 용매에 잘 분산되는 성질을 가지며, 따라서 대량 생산에 용이한 특성을 가지고 있다. 본 연구에서는, 산화그래핀이 함유된 폴리이미드 나노복합막을 제조하였다. 폴리이미드는 현재 널리 이용되고 있는 기체 차단성 고분자 중의 하나로서 높은 기계적 강도, 열적 안정성 및 내화학성을 가지고 있다. 본 연구를 통하여 산화그래핀이 함유된 폴리이미드 나노복합막이 기체 차단성을 가지고 있음을 확인하였다. 더 나아가, Triton X-100이나 sodium deoxycholate (SDC) 등의 계면활성제를 나노복합막에 도입함으로써 산화그래핀의 고분자 매트릭스 내에서의 분산성을 향상시켜 기체 차단성을 높이고자 하였다. 그 결과로서, Triton X-100이 도입된 나노복합막이 예상치와 유사한, 향상된 기체 차단성을 보임을 확인하였다. 본 연구를 기반으로 고분자 기반 나노복합막의 기체 차단성 분야로의 활용성이 증대될 것으로 기대한다.