• 접착 및 계면
• /
• 제3권1호
• /
• pp.13-19
• /
• 2002

We have studied on the surface and adhesion properties for acrylic terpolymers, having both hydrophobic and hydrophilic side chains, synthesized via solution polymerization. In order to develop a waterborne material. we tried to synthesize these terpolymers via emulsion polymerization. The polymeric emulsion synthesized was mainly composed of methyl methacrylate (MMA), methoxy-polyethyleneglycol methacrylate (MPEGMA) having hydrophilic side chains and methoxypolypropyleneglycol methacrylate (MPEGMA) having hydrophobic side chains. The viscosities of this series increased with an increase in the content of the co-monomer such as MPEGMA and (MPEGMA). This behavior resulted in the increase in the diameter and heterogeneity of the emulsion particle via AFM observation. Furthermore. the tensile adhesion strength and 90-degree peel strength of the adhesive of these polymeric emulsions were measured. In the case of polymeric emulsion composed of the same content of both hydrophilic and hydrophobic component, the adhesion property showed the highest value. However, since the adhesion properties as a practical applicable adhesive were poor, some improvements were required. When the composition above was modified with butyl acrylate (BA), the improvement effect on adhesion strength was accepted. In particular, 90-degree peel strength increased up to a maximum of 400% of the original value.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.61-62
• /
• 2006

In this paper, it was demonstrated that organic thin- film transistors (OTFTs) were fabricated with the organic adhesion layer between an organic semiconductor and a gate insulator by vapor deposition polymerization (VDP) processing. In order to form polymeric film as an adhesion layer, VDP process was also introduced instead of spin-coating process, where polymeric film was co-deposited by high-vacuum thermal evaporation from 6FDA and ODA followed by curing. The saturated slop in the saturation region and the subthreshold nonlinearity in the triode region were c1early observed in the electrical output characteristics in our organic thin film transistors using the staggered-inverted top-contact structure. Field effect mobility, threshold voltage, and on-off current ratio in 15-nm-thick organic adhesion layer were about $0.5\;cm^2/Vs$, -1 V, and $10^6$, respectively. We also demonstrated that threshold voltage depends strongly on the delay time when a gate voltage has been applied to bias stress.

• Advances in concrete construction
• /
• 제5권6호
• /
• pp.587-611
• /
• 2017

This study focused on the influences regarding the use of polyepoxide-based polymer and silica fume (SF) on the fresh and hardened state properties of self-compacting lightweight concrete (SCLC) along with their impacts on electrical resistance and ultrasonic pulse velocity (UPV). To do so, two series of compositions each of which consists of twelve mixes, with water to binder (W/B) ratios of 0.35 and 0.4 were cast. Three different silica fume/binder ratios of 0, 5%, and 10% were considered along with four different polymer/binder ratios of 0, 5%, 10%, and 15%. Afterwards, the rupture modulus, tensile strength, 14-day, 28-day, and 90-day compressive strength, the UPV and the electrical resistance of the mixes were tested. The results indicated that although the use of polymer could enhance the passing and filling abilities, it could lead to a decrease of segregation resistance. In addition, the interaction of the SF and the polymeric contents enhanced the workability. However, the impacts regarding the use of polymeric contents on fresh state properties of SCLC were more prevalent than those regarding the use of SF. Besides the fresh state properties, the durability and mechanical properties of the mixes were affected due to the use of polymeric and SF contents. In other words, the use of the SF and the polymer enhanced the durability and mechanical properties of SCLC specimens.

• 폴리머
• /
• 제29권3호
• /
• pp.248-252
• /
• 2005

다양한 조성을 갖는 폴리프로필렌(PP)/몬모릴로나이트(MMT) 나노복합체를 이축압출기를 이용하여 용융혼합 법으로 제조하였다. 본 연구에서는 MMT의 박리를 위하여 MAH-g-PP를 상용화제로 사용하였고, 제조된 나노복합체를 X-ray 회절(X-ray diffraction, XRD)과 투과전자현미경(Transmission Electron Microscope, TEM)을 통해 MMT가 박리된 것을 확인하였다. PP/MMT 나노복합체의 제조에 사용한 MMT는 난연제와 상승효과를 발휘하여 난연제의 양을 절반가까이 줄였을 경우에도 우수한 난연효과를 나타내었다. PP/MMT 나노복합체는 순수 PP보다 기계적 물성과 열적 물성이 증가하였고, 난연성은 UL 94 V-0로 매우 우수하였다.

• 한국분말재료학회지
• /
• 제25권2호
• /
• pp.151-157
• /
• 2018

In this study, the compound $Li_3BO_3$ (LBO) is intended to be prepared by a polymeric complex method as a sintering aid for the densification of $Li_7La_3Zr_2O_{12}$ (LLZ) solid electrolyte. A polymeric precursor containing Li and B is heat-treated in an air atmosphere at a temperature range between $600^{\circ}C$ and $800^{\circ}C$. Instead of LBO, the compound $Li_{2+x}C_{1-x}B_xO_3$ (LCBO) is unexpectedly synthesized after a heat-treatment of $700^{\circ}C$. The effect of LCBO addition on sintering behavior and ion conductivity of LLZ is studied. It is found that the LCBO compound could lead to significant improvements in the densification and ionic conductivity of LLZ compared to pure LLZ. After sintering at $1100^{\circ}C$, the density of the LLZ-12wt%LBO composite is $3.72g/cm^3$, with a high Li-ion conductivity of $1.18{\times}10^{-4}Scm^{-1}$ at $28^{\circ}C$, while the pure LLZ specimen had a densify of $2.98g/cm^3$ and Li-ion conductivity of $5.98{\times}10^{-6}Scm^{-1}$.

• 조명전기설비학회논문지
• /
• 제19권2호
• /
• pp.138-144
• /
• 2005

본 논문에서는 산불이 송전용 폴리머애자에 미치는 영향을 연구하기 위해 인공화염 시험장치를 제작하여 화염의 가열 시간에 따른 폴리머애자의 갓(shed) 변화와 자기애자의 disc 변화를 관찰하고, 전기적$\cdot$기계적 실험을 통하여 특성변화를 확인하였다. 실험결과 다음과 같은 결론을 얻을 수 있었다. 첫째, 화염의 가열시간이 5분정도 경과하였을 때, 자기애자의 전기적 특성은 $80(\%)$ 정도 저하된 반면에 폴리머애자의 경우 갓 유실이 있었지만 전기적 특성의 변화는 $10(\%)$ 정도였다. 폴리머애자를 20분 가열하였을 때는 대부분의 갓이 유실되었지만 전기적 특성치는 $20(\%)$ 정도 감소하였다. 둘째, 폴리머애자와 자기애자 모두 전기적 특성치의 감소는 있었지만 기계적 특성치는 양호하게 나타났다.

• Journal of the Korean Wood Science and Technology
• /
• 제42권4호
• /
• pp.483-490
• /
• 2014

마이크로피브릴 셀룰로오스(MFC) 강화 polybutylene succinate (PBS) 나노복합재료의 성질에 미치는 MFC 첨가량 및 커플링제로서 polymeric methylene diphenyl diisocyanate (pMDI)의 첨가 영향을 조사하였다. 나노복합재료의 인장강도 및 탄성율은 MFC의 첨가량이 증가함에 따라 향상되었다. 또한 pMDI 첨가에 의하여 인장강도 및 탄성율은 증가하였으며, MFC첨가량이 증가하면서 그 경향이 더욱 뚜렷하였다. PBS/MFC (70/30) 복합재료에서는 인장강도가 pMDI(1 중량부)의 첨가에 의하여 약 1.5배 이상 향상되었다. 이러한 향상은 pMDI 첨가에 의한 MFC의 분산성 및 메트릭스 고분자와의 계면접착성 향상에 기인하며, 전자현미경을 이용한 파단면 관찰로 확인하였다. 또한, pMDI 첨가에 의하여 나노복합재료의 열적 안정성도 향상되었다.

• Macromolecular Research
• /
• 제16권3호
• /
• pp.185-188
• /
• 2008

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 봄 학술발표회 논문집
• /
• pp.311-312
• /
• 2003

Activated carbons (ACs) are widely used in adsorption for the removal of gaseous and aqueous pollutants[1]. Although a wide range of carbonaceous materials can be converted into ACs, the coal and lingocellulosic materials are the most commonly used starting materials for the production of commercial ACs. Recently, there are a quite large number of studies regarding the preparation of ACs from various polymeric materials because of high carbon yield and low ash content In this work, ACs are prepared from polystyrene (PS) by chemical activation with potassium hydroxide and the effect of the KOH-to-PS ratio to adsorption of ammonia is investigated. (omitted)

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2003년도 The Korea-Japan Joint Symposium
• /
• pp.27-28
• /
• 2003

Synthesis and properties of novel excited-state intramolecular proton transfer (ESIPT) materials recently developed in our group are described. Highly efficient ESIPT in polymeric system has been investigated theoretically and experimentally with a semi-rigid polyquinoline (PQH, PQDH) possessing an intramolecular tautomerizable hydrogen bond. Poly(aryl ether) dendrimers of three different generations that are cored with photo-tautomerizable quinoline (QGn, n=1,2,3) were also synthesized and characterized to investigate the effect of dendritic architecture on the ESIPT activity. Stimulated emission and amplified spontaneous emission in these organic materials system are discussed in terms of ESIPT activity.