• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 1991

Since the material property of binder in polyester polymer concrete has a viscous mechanism, the workability of polyester polymer concrete mixture showed different characteristics from that of cement concretes. Therefore, this study was devised to evaluate workability characteristics of polyester polymer concrete using slump and flow tests. Study results showed that the test temperature and ST/UP ratio were the most dominantly affecting factor on the viscosity of binder, and viscosity of the binder was strongly correlated with the workability of polyester polymer concrete mixture.

• Macromolecular Research
• /
• 제16권7호
• /
• pp.631-636
• /
• 2008

The intrinsic viscosities were determined for poly(DL-lactic acid) (PDLLA) solutions in 1,2-dialkyl phthalate at temperatures ranging from 30 to $60^{\circ}C$. A series of dialkyl phthalate, in which the alkyl group was changed from methyl to propyl, was used as the solvent to control the solvent quality systematically. The intrinsic viscosity of the PDLLA solution was higher in the better quality solvent, with a higher molecular weight of PDLLA, and at lower temperatures. The unperturbed dimensions of the PDLLA molecule and polymer-solvent interaction parameter of PDLLA in dialkyl phthalate were deduced using extrapolation methods based on the temperature-dependent intrinsic viscosities. Slight shrinkage in the unperturbed chain dimension was observed, which resulted from a change in polymer conformation with temperature. It was also observed that the polymer-solvent interaction became more favorable with the dialkyl phthalate containing a shorter alkyl chain.

• 공업화학
• /
• 제9권2호
• /
• pp.200-206
• /
• 1998

수면전개법에 의해 제조된 박막의 두께에 대한 고분자용액의 표면장력과 점도의 영향을 검토하였다. 수면에서 고분자용액의 전개는 고분자용액의 표면장력과 점도에 의해 지배되며, 수면전개 박막의 두께도 이들 인자의 영향을 받는다. 고분자의 농도가 증가함에 따라 고분자용액의 표면장력과 점도는 증가하였으며, 표면장력의 크기는 PVC>PS>CA이었고, 점도의 크기는 CA>PS>PVC 였다. 고분자용액의 수면전개시 물과 고분자용액의 표면장력의 차는 전개구동력으로 작용하나 고분자용액의 표면장력과 점도는 전개저항으로 작용하였다. 수면전개 박막의 두께에 대한 고분자용액의 점도영향이 표면장력에 의한 영향 보다도 더 컸으며, 수면 전개 박막의 두께는 PS>CA>PVC 순으로 두꺼웠다.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2001년도 Australian-Korean Rheology Conference 2001
• /
• pp.160.5-161
• /
• 2001

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.136-136
• /
• 2016

Commonly used oil-based polymer resin has environmental and safety issues. Many researches for replacing the harmful solvent-borne resins to water-borne resins have been investigated to purify harmful environmental resources and follow the export and import of hazardous materials regulations. In this research, ultrasonic spray coatings of aqueous polymer resin were studied to fabricate thin insulating layer (${\sim}{\mu}m$) on the rectangular copper wire. It needs to have appropriate wettability between resin and substrate during the ultrasonic spray coating process to coat aqueous polymer uniformly. Furthermore, stabilities of coating solution and fabricating process are required to form thin insulating layer on the substrate. In here, physical characteristics such as viscosity of 6 types of commercial polymer dispersions and emersions were analyzed to confirm compatibility for ultrasonic spray coating process. These resins were dissolved in isopropyl alcohol, used for true solvent, and were diluted with ethanol, utilized for diluent. Also, solubilities, dispersion characteristics, and viscosities of these diluted polymer resin solutions were confirmed. Dispersion characteristic and viscosity of coating solution affects jetting of ultrasonic spray coating and these jetting characteristics influence morphologies of insulating layer. In conclusion, we have known that aqueous polymer solution should have outstanding dispersion characteristic and certain range of viscosity to fabricate thin polymer insulating layer uniformly with ultrasonic spray coating.

• 폴리머
• /
• 제35권1호
• /
• pp.23-29
• /
• 2011

소수성 설리카를 안정제로 하는 현탁중합법으로 $75^{\circ}C$에서 합성한 고분자입자들을 모세관 레오미터를 이용하여 전단점도를 측정하였다. 전단점도는 중량평균분자량이 증가하면서 비뉴톤거동을 나타내였다. 스타렌(St)/부틸메타크릴레이트(BMA)의 구성비를 변화하며 합성한 공중합체 입자를 이용하여 $170^{\circ}C$ 및 $190^{\circ}C$에서 측정한 전단점도는 분자량, 온도 뿐만 아니라 구성비에 따라서도 변화하였다. St/BMA의 구성비가 7/3, 5/5 및 3/7의 공중합체 (co-PSB) 입자의 경우 유사한 분자량을 나타내었지만 BMA의 구성비가 증가하면서 전단점도는 소폭 감소하였다. BMA의 비가 3/7을 초과하며 높은 전단속도에서의 전단점도는 급격히 감소하였다. 이는 BMA 구성비의 증가에 따른 PBMA 사슬의 길이의 증가로 인한 유동성 향상에 기인하는 것으로 판단된다. 카본블랙을 함유하는 co-PSB 복합체 업자의 전단점도는 카본블랙의 증가에 따라 점진적으로 증가하였으나, 카본블랙의 농도 증가에 따른 전단점도의 증가는 분자량의 증가 효과에 비교하여 미약하였다.

• 폴리머
• /
• 제34권5호
• /
• pp.415-423
• /
• 2010

고검화도(98%이상)의 폴리(비닐 알코올)(PVA)를 디메틸설폭사이드(DMSO) 용매에 녹인 뒤 PVA 준희박 용액 대에서 농도 $C{\simeq}0.14\;g/mL$까지 점성도를 측정하였으며, 이 시스템을 매트릭스로 하여 폴리스티렌(PS) 라텍스 입자의 확산운동 지연을 동적 광산란법으로 조사하였다. PVA/DMSO계의 점성도를 고유점성도 $[{\eta}]$로 스케일된 환산농도 $C[{\eta}]$에 대하여 도시하였을 때 C$[{\eta}]$ >2에서는 분자량 의존성이 강하게 나타났으며, 그 원인은 PVA 용액 내에 존재하는 불균일 영역때문인 것으로 추정하였다. 그러나 매트릭스 내에서 탐침입자의 확산운동은 모든 측정농도에서 단일모드로 관찰되었고, 용액상 및 용매상에서의 확산계수의 비인 D/Do를 $C[{\eta}]$로 도시할 때 전체 농도 범위에서 분자량 의존성은 전혀 나타나지 않았으나 신장지수함수의 적용 한계는 C$[{\eta}]$ >2.5인 것으로 관찰되었다.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.664-669
• /
• 2019

In this paper, a water-based green polymer mud is synthesized by simple compounding method. Effects of different kinds of tackifiers, their molecular weight on the viscosity of polymer mud and the effects of different fluid loss additives on mud fluid loss are studied. The results show that when polystyrene and anionic polyacrylamide with molecular weight of 8 ~ 10 million are used as the main thickening ingredient, polymer mud with high viscosity and high stability can be obtained. When the prepared polymer mud is formulated as NPAM: PEO: Hydroxypropyl cellulose(HPC) : Water = 42:10:10:100000 (unit: kg), the viscosity can reach 20.6 s, the filtration loss in 7.5 min is 24 mL, and the sand content is only 0.1 %. Compared with traditional bentonite mud, the green environment-friendly polymer mud has the advantages of small amount of waste, low environmental pollution, and low pulping cost, and can meet the construction needs for most topography and geomorphology drilling engineering.

• 한국기계가공학회지
• /
• 제7권3호
• /
• pp.61-66
• /
• 2008

For the production of urethane prepolymer, the effect of process parameters such as diisocyanate MDI and polyol TDI was tested. In this paper, design of experiments has been adopted for studying the effect of the process parameters on the improvement of NCO and viscosity of pre-polymer. As a result of comparison of different parameters, the effect of polyol was stronger than that of isocyanate in comparison of reactivity according to the amounts of isocyanate and polyol. Especially, NCO and viscosity of pre-polymer affected a product safety.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.1-8
• /
• 2000

A modified low-Reynolds-number Reynolds stress model is developed for the calculation of drag-reducing turbulent flows induced by polymer injection. The results without polymer injection are compared with the results of direct numerical simulation to ensure the validity of the basic model. In case of drag reduction, profiles of mean velocity and Reynolds stress components, in two-dimensional channel flow, obtained with a proper value of viscosity ratio are presented and discussed. Computed mean velocity profile is in very good agreement with experimental data. And, the qualitative behavior of Reynolds stress components with the viscosity ratio is also reasonable.