• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.519-524
• /
• 2012

Capacitance measurements of the polymer light-emitting diodes (PLEDs) with conjugated polyelectrolyte (CPE) electron transporting layers (ETLs) provide important information of device physics for understanding the function of CPEs as ETLs, together with current density-voltage-luminescence measurements. We investigated the counterion-dependent capacitance behaviors that present a highly negative or positive capacitance at the low frequency, and suggested different carrier injection mechanisms. Capacitance model study reveals that the electron injection mechanism can be described either by the dipole alignment scheme or by electronic charge carrier accumulation at the cathode/ETL/emission layer interfaces.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.758-763
• /
• 2006

We has been studied the thin film encapsulation effect for organic light-emitting diodes (OLED). To evaluate the passivation properties of the passivation layer materials, we have carried out the fabrication of green light emitting diodes with ultra violet(UV) light absorbing polymer resin, $SiO_2,\;and\;SiN_x$, respectively. From the measurement results of shrinkage properties according to the exposure time to the atmosphere, we found that $SiN_x$ thin film is the best material for passivation layer. We have investigated the emission efficiency and life time of OLED device using the package structure of $OLED/SiN_x/polymer$ resin/Al/polymer resin. The emission efficiency of this OLED device was 13 lm/W and life time was about 2,000 hours, which reach 95 % of the performance for the OLED encapsulated with metal.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.1
• /
• pp.25-28
• /
• 2005

We have investigated the effects of hole-injection buffer layer in organic light-emitting diodes using poly(3,4-ethylenedioxythiophene):poly(stylenesulfonate)(PEDOT:PSS) in a device structure of $ITO/PEDOT:PSS/TPD/Alq_{3}/cathode$. Polymer PEDOT:PSS buffer layer was made by spin casting method. Current-voltage, luminance-voltage characteristics and efficiency of device were measured at room temperature with a variation of cathode materials; Al, LiF/Al, LiAl, and Ca/Al. The device with LiF/Al cathode shows an improvement of external quantum efficiency approximately by a factor of ten compared to that of Al cathode only device. Our observation shows that cathode is important in improving the efficiency of the organic light-emitting diodes.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.9-10
• /
• 2006

Recent work in our laboratory has focused on the molecular and supramolecular engineering of conjugated polymers and oligomers for device applications, including light emitting diodes for displays and lighting, photovoltaic cells, and thin film transistors. A central finding is that the supramolecular structure of conjugated polymers can have a dominant influence on their properties and the performance of devices. Some major results include: highly efficient RGB light-emitting diodes from polymers and oligomers; high mobility n-channel polymer field effect transistors; ambipolar thin film transistors from copolymer semiconductors; and self-assembly and ambipolar charge transport in polymer nanowires.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.752-754
• /
• 2009

High efficiency white organic light emitting diodes were fabricated by using an alignment free mask patterning method. Only red/green emission without any blue emission was observed in the red/green patterned region and blue emission was emitted in other area. A combination of the red/green and blue emission gave a high efficiency white emission. A maximum current efficiency of 30.7 cd/A and a current efficiency of 25.9 cd/A at 1000 cd/$m^2$ were obtained with a color coordinate of (0.38, 0.45).

• Korean Journal of Materials Research
• /
• v.19 no.6
• /
• pp.313-318
• /
• 2009

Polymer Light Emitting Diodes (PLEDs) with an ITO/PEDOT:PSS/PVK/PFO-poss/LiF/Al structure were prepared on plasma-treated ITO/glass substrates using spin-coating and thermal evaporation methods. The annealing effects of the PFO-poss film when it acts as the emission layer were investigated by using electrical and optical property measurements. The annealing conditions of the PFO-poss emission film were 100 and $200^{\circ}C$ for 1, 2 and 3 hours, respectively. The luminance increased and the turn-on voltage decreased when the annealing temperature and treatment time increased. After examining the Luminance-Voltage (L-V) properties of the PLED, the maximum luminance was found to be 1497 cd/$m^2$ at 11 V for the device when it was annealed at $200^{\circ}C$ for 3 hours. The peak intensity of the PLED emission spectra at approximately 525 nm in wavelength increased when the annealing temperature and time of the PFO-poss film increased. These results suggest that the light emission color shifted from blue to green.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.250-250
• /
• 2012

Organic light-emitting diodes (OLED) and polymer light emitting diodes (PLED) have been regarded as the candidate for the next generation light source and flat panel display. Currently, the most common OLED industrial fabrication technology used in producing real products utilizes a fine shadow mask during the thermal evaporation of small molecule materials. However, due to high potential including low cost, easy process and scalability, various researches about solution process are progressed. Since polymer has some disadvantages such as short lifetime and difficulty of purifying, small molecule OLED (SMOLED) can be a good alternative. In this work, we have demonstrated high efficient solution-processed OLED with small molecule. We use CBP (4,4'-N,N'-dicarbazolebiphenyl) as a host doped with green dye (Ir(ppy)3 (fac-tris(2-phenyl pyridine) iridium)). PBD (2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole) and TPD (N,N'diphenyl-N,N'-Bis (3-methylphenyl)-[1,1-biphenyl]-4,4'-diamine) are employed as an electron transport material and a hole transport material. And TPBi (2,2',2''-(1,3,5-phenylene) tris (1-phenyl-1H-benzimidazole)) is used as an hole blocking layer for proper hole and electron balance. With adding evaporated TPBi layer, the current efficiency was very improved. Among various parameters, we observed the property of OLED device by changing the thickness of hole transporting layer and solvent which can dissolve organic material. We could make small molecule OLED device with finding proper conditions.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.3
• /
• pp.343-344
• /
• 2004

• Journal of Information Display
• /
• v.10 no.2
• /
• pp.92-95
• /
• 2009

Highly efficient blue and white phosphorescent organic light-emitting diodes (PHOLEDs) with an exciton-confining structure were investigated in this study. Effective charge confinement was achieved by stacking two emitting layers with different charge-transporting properties, and blue PHOLEDs with a maximum luminance efficiency of 47.9 lm/W were developed by using iridium(III) bis(4,6-(difluorophenyl) pyridinato-N,C2')picolinate (FIrpic) as an electrophosphorescent dopant. Moreover, when the optimized green and red emitting layers were sandwiched between the two stacked blue emitting layers, white PHOLEDs (WOLEDs) with peak external and luminance efficiencies of 19.0% coupling technique.and 54.0 lm/W, respectively, were obtained without the use of any out-coupling technique.

• Journal of Information Display
• /
• v.13 no.4
• /
• pp.151-157
• /
• 2012

A simple method of fabricating out-coupling structures was demonstrated via solution-processing to enhance light extraction from organic light-emitting diodes (OLEDs). Scattering layers were easily obtained by spin-coating an $SiO_2$ sol solution that contained $TiO_2$ particles. By introducing the scattering layer and the solution-processible corrugated structure as internal and external extraction layers, the OLEDs showed increased external quantum efficiency without a change in the electroluminescence spectrum compared to conventional devices. Using these solution-processible out-coupling structures, nearly all-solution-processed OLEDs with enhanced light extraction could be fabricated. The light extraction enhancement is attributed to the suppression by the out-coupling structures of the light-trapping that arose at the interface of the glass substrate and the air.