• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.309-313
• /
• 2002

In this paper, we have studied minimization of the kerf-width and surface burning, which occurred after the conventional singulation process of the multi-layer BGA board with copper, polyethylene and epoxy glass fiber. The high thermal energy of a pulsed Nd:YAG laser is used to cut the multi-layer board. The most considerable matter in the laser cutting of the multi-layer BGA boards is their different absorption coefficient to the laser beam and their different heat conductivity. The cut mechanism of a multi-layer BGA board using a 2$^{nd}$ harmonic Nd:YAG laser is the thermal vaporization by high temperature rise based on the Gaussian profile and copper melting point. In this experiment, we found that the sacrifice layer and Na blowing are effective in minimizing the surface burning by the reaction between oxygen in the air and the laser beam. In addition, N2 blowing reduces laser energy loss by debris and suppresses surface oxidation. Also, the beam incidence on the epoxy layer compared to polyimide was much more suitable to reduce damage to polyimide with copper wire for the multi layer BGA singulation. When the polyester double-sided tape is used as a sacrifice layer, surface carbonization becomes less. The SEM, non-contact 3D inspector and high-resolution microscope are used to measure cut line-width and surface morphology.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.81-87
• /
• 1999

The surface morphology of liquid crystal alignment layer has been investigated by using Brewster angle microscope(BAM) for the first time. The samples used in this work for liquid crystal alignment layer were mechanically rubbed polyimide films. The rubbing pattern on this layer has been analyzed with the terms of microgroove and rubbing induced optical birefringence. For the mechanically rubbed surface, the geometrical factors of microgroove play the major role for the formation of rubbing pattern. We propose that the BAM can be used as a powerful tool not only for observing the rubbing pattern, but also for inspecting the surface defects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.234-236
• /
• 1994

We fabricated Au/PI/Pb and Au/PI/1-layer Arachidic acid/Pb structures in order to electron transport properties through the junctions. It was found that 9-layer PI LB films function as a good tunneling barrier from the I-V properties. And several peaks originating in the vibrational modes of the constituent molecules of 1-layer arachidicacid LB films were clearly observed in $d^2V/dI^2-V$ curves.

• 마이크로전자및패키징학회지
• /
• 제10권2호
• /
• pp.39-47
• /
• 2003

감광성 폴리이미드 위에 Cr을 RF 바이어스 스퍼터링 및 RF클리닝 후 DC 스퍼터링한 Cr/폴리이미드의 계면을 TEM으로 관찰하였다. RF power 밀도를 $0.13W/cm^2$에서 $2.12W/cm^2$로 증가시키면서 RF클리닝을 실시한 결과 폴리이미드의 에칭 양상이 둥근 모양에서 뾰족한 모양으로 변하였고 이방성 에칭으로 인해 거칠기가 크게 증가하였다. RF 바이어스 스퍼터링의 경우 RF power를 올리는 동안 RF 클리닝에 의해 폴리이미드가 에칭되었고, 에칭된 부분에 Cr이 증착된 계면을 단면으로 관찰한 결과 Cr과 폴리이미드가 겹쳐져서 혼합된 것처럼 보였다. 그러나 RF power를 올리는 시간을 단축시켜 Cr을 바이어스 스퍼터링했을 때에는 계면이 분명하게 관찰되어 Cr의 implantation이 일어나지 않았음을 알 수 있었다. RF 클리닝한 Cu/Cr/Polyimide를 필 테스트한 결과 짧은 시간의 RF 클리닝으로도 접착력이 크게 증가하였다. 그러므로 RF power를 올리는 동안 실시되었던 RF 클리닝이 RF 바이어스 스퍼터링한 Cr/Polyimide의 접착력 향상에 영향을 주었을 것으로 예상된다.

• 폴리머
• /
• 제33권6호
• /
• pp.525-529
• /
• 2009

우수한 성능의 2층 연성동박적층판(이하 FCCL)을 제조하기 위해서는 동박과 폴리이미드 사이에서 높은 접착력이 요구된다. 이를 위해 이종 재료로 인한 두 계면 사이의 접착력을 향상시키기 위해서는 일반적으로 기능성 실란커플링제가 사용된다. 본 연구에서는 압연동박과 폴리이미드 사이의 접착력 향상과 이미드화를 위한 고온의 열처리 조건에서도 안정한 새로운 형태의 실란커플링제를 합성하였다. 또한, 합성된 실란커플링제를 압연동박에 처리하였을 때, 표면처리제의 농도에 따른 표면변화를 관찰하였으며, 이로 인해 발생되는 접착력 변화를 확인하기 위해서 2층 FCCL을 제조하여 $90^{\circ}$ peel test를 통해 관찰하였다. 그리고, 두 종류의 폴리이미드를 이용한 FCCL에서 실란 커플링제가 접착력에 미치는 영향을 확인하였다.

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1110-1114
• /
• 2003

We have investigated the generation of pretilt angle for a nematic liquid crystal (NLC) alignment with rubbing alignment method on polyimide surfaces using thin plastic substrates. It was found that monodomain alignment of NLC is obtained with rubbing alignment method on polyimide surfaces using thin plastic substrates. The NLC pretilt angles generated are about 3$^{\circ}$ by the rubbing alignment method on thin plastic substrates, However, the pretilt angle are at about 1.7$^{\circ}$ lower on the glass substrate than on thin plastic substrate. We obtain that AFM (atomic force microscope) image of rubbed PI surface with polymer film has formed the micro-groove structure at the low curring temperature (120$^{\circ}C$). However, no grooves are obtained on the glass substrate at the same temperature. It is considered that this alignment may be attributed to roughness of micro-groove substrate. The tilt angle increases with increasing baking temperature for making polyimide layer using glass substrate. It was concluded that the pretilt angle in the polyimide surface is attributable to the increasing of imidization rato.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.335-338
• /
• 2002

A new process for polymeric gate insulator in field-effect transistors was proposed. Fourier transform infrared absorption spectra were measured in order to identify ODPA-ODA polyimide. Its breakdown field and electrical conductivity were measured. All-organic thin-film transistors with a stacked-inverted top-contact structure were fabricated to demonstrate that thermally evaporated polyimide films could be used as a gate insulator. As a result, the transistor performances with evaporated polyimide was similar with spin-coated polyimide. It seems that the mass-productive in-situ solution-free processes for all-organic thin-film transistors are possible by using the proposed method without vacuum breaking.

• Journal of the Optical Society of Korea
• /
• 제18권2호
• /
• pp.156-161
• /
• 2014

Anisotropy profile of a rubbed polyimide film is investigated using both a modified ultra high precision transmission ellipsometer and the analysis software previously developed to determine the optic axis distribution of discotic liquid crystals in the wide view film. The distorted sinusoidal variation of the ellipsometric constants obtained at an oblique angle of incidence indicates that the optic axis varies from $14.7^{\circ}$ to $40.6^{\circ}$ from the sample plane. The magnitude and distribution of anisotropy is expressed in terms of no, ne, and the cosine-shaped tilt angle distribution of the optic axis in a rubbed polyimide film.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권2호
• /
• pp.128-132
• /
• 2004

This paper presents the design, fabrication sequence and measurement results of a highly sensitive capacitive-type humidity sensor using a polyimide film without hydrophobic elements. The structure of the humidity sensor is MIM (metalinsulator-metal). For a high sensitivity, a modified aromatic polyimides as a moisture absorbing layer has been synthesized instead of using general polyimides containing hydrophobic elements. The polyimide film was obtained by synthesizing and thermally polymerizing polyamic acid composed of m-pyromellitic dianhydride, phenelenediamine and dimethylacetamide. Characteristics of fabricated sensors which include sensitivity, hysteresis and stability have been measured. The measurement result shows the percent normalized capacitance change of 0.37/%RH over a range from 10 to 90%RH, hysteresis of 0.77% over the same %RH range and maximum drift of 0.25% at 50%RH. The result shows that the developed humidity sensor can be applied to evaluate a hermeticity of various sensors and actuator systems as well as micro packages.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.107-112
• /
• 2003

The alignment effect of liquid crystals on Polyimide surfaces bombarded by a low energy argon ion beam and the effect of pretilt angle on viewing characteristics of an LCD cell are discussed. The unidirectional out-of-plane liquid crystal tilt angle is varied with various ion beam irradiation conditions, such as the energy of the incident ions, the angle of incidence and exposure time. As low pretilt angle is profitable for wider viewing property, LCD cell with ion beam modified Polyimide layer show wider viewing characteristics.