• Clean Technology
• /
• v.10 no.4
• /
• pp.195-201
• /
• 2004

Cellulase was modified with copolymer with polyethylene(PE)/polypropylene(PP) oxide and maleic anhydride(MA) by maleylation reaction, and modified cellulase was applied to the reprocessing of old newsprint (ONP). Cellulase of modified cellulase enhanced the detachment of ink particles by fibrillation of fiber. The copolymer, which acted as the surfactant formed bubbles and removed the ink particles in the floatation process. Modified cellulase showed the same deinking ability without excess dosage compared with the conventional method. And, it improved the physical properties including tensile strength, brightness, and whiteness compared with the conventional deinking process. The bond between the ink and fiber got stronger as the storage time increased, and it became very difficult to remove the ink particle. But, modified cellulase increased the deinking ability by 41% compared with the conventional process at the experiment of the ONP for 1 year storage time. It removed the yellowing and increased the whiteness and brightness as well as tensile strength and internal bond strength.

• Membrane Journal
• /
• v.16 no.2
• /
• pp.133-143
• /
• 2006

A hollow fiber membrane containing BSA as ligand was Prepared by radiation-induced grafting GMA onto a porous polyethylene hollow fiber and subsequent reacting with DEA and TEA. The density of the DEA and TEA of the membrane were 3.4 mmol/g, 1.7r mmol/g, respectively. The DEA membrane exhibited a higher amount of than the TEA membrane. BSA was immobilized by the graft chains during the permeation of BSA solution throught the DEA and TEA membrane. The BSA was adsorbed in multilayer binding of 8 onto the DEA membrane whereas adsorption onto the TEA membrane remained constant. A two-stage stepwise BTC was observed due to independent chiral recognition for L, D-Trp solution by DEA-BSA membrane.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.233-240
• /
• 2012

Hybrid SHCC is being researched actively for its excellent performance in controlling macro and micro cracks using macro and micro fibers, respectively. However, a significant autogenous shrinkage of SHCC is expected since it possesses high unit cement volume in its mix proportion, resulting in autogenous shrinkage cracks. Therefore, this study was performed to evaluate mechanical property of shrinkage-reducing type hybrid SHCC mixed together with steel fiber and PE fiber with excellent micro/macro crack controlling performance. In order to evaluate mechanical property of shrinkage-reducing type hybrid SHCC, replacement ratios of 0% and 10% of expansive admixture and water to binder ratios of 0.45, 0.3, and 0.2 were considered as variables. Then, shrinkage, compressive, flexural, and direct tensile tests were performed. The test results showed that mix proportion with W/B 0.3 significantly improved mechanical performance by using 10% replacement of expansive admixture.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.909-912
• /
• 2008

Fiber is an important ingredient in strain-hardening cementitious composite (SHCC), which can control fracture of cementitious composite by bridging action. The properties of reinforcing fiber, as tensile strength, aspect ratio and elastic modulus, have great effect on the fracture behavior of SHCC. But SHCC has serious problem as drying shrinkage because silica powder is used to make SHCC in order to improve bond strength between reinforcing fibers and cement matrix. Therefore, curing method (period and temperature) is very important for SHCC to show high tensile performance. a variety of experiments have being performed to access the performance of SHCC recently. This research emphasis is on the mechanical properties of SHCC made in Polyvinyl alcohol (PVA), Polyethylene (PE) fibers and steel cord (SC), and how curing method affects the composite property, and ultimately its strain-hardening performance.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.93-97
• /
• 2012

Heat treatment effect of polyethylene (PE) separators was investigated after storage at 80, 100 and $120^{\circ}C$ for 1 h. All the samples showed enhanced tensile strength and modulus after heat treatment, but thermal shrinkage up to 15% was observed in PE films having newly formed dimple structure on the surface of fiber after annealed at 100 and $120^{\circ}C$. Although there was 5% of thermal shrinkage after annealing at $80^{\circ}C$, no such serious changes in PE fiber was observed. Furthermore, the separator was found to have enhanced cell performance with 1.3 and 2.3 times higher tensile strength and modulus after heat treatment at $80^{\circ}C$ for 1 h.

• Textile Coloration and Finishing
• /
• v.33 no.4
• /
• pp.210-219
• /
• 2021

It was intended to conduct basic research to reduce development lead time and cost consumed in DTP process technology development. For the simulation of HTPE fabric, virtual engineering software was used to generate fiber model, yarn model, fabric model, and finite element model of HTPE fiber. The purpose of this study is to analyze the correlation and error rate between the stiffness numerical analysis results according to the direct DTP process parameters using reactive dyes in the generated finite element model and the stiffness measurements of the actual sample ac- cording to ASTM D1388. And, after dyeing the HTPE plain fabric according to the direct DTP process parameters, we want to analyze the dyeability of the HTPE fabric fabrics according to the direct DTP process parameters through the color fastness analysis. When looking at the results of the analysis of the finite element model, a higher value was shown when the distance between the nozzle and the fabric was 3mm than when the distance was 10mm. When the distance between the nozzle and the fabric was 10mm and 7mm, the reactive dye did not penetrate sufficiently, resulting in poor clarity when viewed with the naked eye.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1429-1437
• /
• 2003

Browse tree legume leaves from Acacia spp (A. nilotica, A. tortilis, A. polyacantha), Dichrostachys sp, Flagea villosa, Piliostigma thonningii, Harrisonia sp were evaluated for nutritive potential (chemical compositions and degradability characteristics) compared to Gliricidia sepium. Effect of tannins anti-nutritive activity on digestibility was also assessed by polyethylene glycol (PEG) tannin bioassay. Crude protein (CP), ash, neutral detergent fiber (NDF), acid detergent fiber (ADF) and acid detergent lignin (ADL) differed (p<0.05) between legume foliages. Mean CP, ash, NDF, ADF and ADL for fodder species tested were 158, 92, 385, 145, and 100 g/kg DM, respectively. CP ranged from 115 (P. thonningii) to 205 g/kg DM (G. sepium). Acacia spp had moderate CP values (g/kg DM) of 144 (A. nilotica), to high CP in A. tortilis (188) and A. polyacantha (194) comparable to G. sepium. The forages had relatively lower fiber compositions. A. nilotica had (p<0.05) lowest NDF, ADF and ADL (182, 68 and 44) compared to P. thonningii (619, 196 and 130) g/kg DM, respectively. Except G. sepium, all fodder species had detectable high phenolic and tannin contents greater than 5% DM, an upper beneficial level in animal feeding and nutrition. Mean total phenolics (TP), total tannins (TT) and condensed tannins (CT) (or proanthocyanidins) for fodder species tested were 139, 113 and 43 mg/g DM, respectively. F. villosa had (p<0.05) lowest TP and TT of 65 and 56 mg/g DM, respectively, compared to A. nilotica (237 and 236 mg/g DM, respectively). The CT varied (p<0.05) from 6 (F. villosa) to 74 mg/g DM (Dichrostachys sp). In vitro organic matter (OM) degradability (OMD) differed (p<0.05) between fodder species. G. sepium had (p<0.05) high degradability potential compared to A. polyacantha that had (p<0.05) the lowest OMD values. Forage degradability ranked: G. sepium>A. nilotica>P. thonningi>F. villosa>Dichrostachys sp>A. tortilis>A. polyacantha. Addition of PEG resulted to (p<0.05) improvement in in vitro OM digestibility (IVD). Increase in IVD was mainly due to binding action of PEG on tannins; and represents potential nutritive values previously depressed by tannins anti-nutritive activity. Browse fodder has potential as sources of ruminal nitrogen especially for ruminants consuming low quality roughages due to high protein, lower fiber compositions and high potential digestibility. However, utilization of browse supplements in ruminants is hampered by high phenolic and tannin contents. Deactivation of tannin anti-nutritive activity, possibly by feeding tanniniferous browse with other readily available nitrogen sources to dilute tannin anti-nutritive activity could improve utilization of browse fodder supplements. Further studies are needed to assess browse fodder palatability and intake, and their effect on growth performance in ruminants.

• Journal of the Korea Concrete Institute
• /
• v.24 no.2
• /
• pp.111-120
• /
• 2012

This paper is a report about lap splice performance of rebar embedded in the strain-hardening cement-based composites (SHCCs) under monotonic and repeated tension loading. Ten mix proportions of cement-based composites such as SHCCs and normal concrete were investigated. The study parameters are comprised of (1) types of reinforcing fibers (polyethylene and steel fiber), (2) replacement levels of expansive admixture (EXA, 0% and 10%), and (3) compressive strength (30 and 100 MPa) of cement-based composites. Lap splice lengths (ld) of rebars in SHCC materials and normal concrete were 60% and 100% of splice length calculated by code requirements for structural concrete, respectively. Test results indicated that SHCCs materials can lead to enhancements in the lap splice performance of embedded rebar. All of the fiber reinforcement conditions (PE-SHCC and PESF-SHCC) considered in this study produced considerable improvements in the tensile strength, cracking behavior, and bond strength of lap-spliced rebar. Furthermore, adding EXA to SHCC matrix improved the tensile lap splice performance of rebar in SHCC materials. However, for controlling crack behavior, the performance of PE-SHCC was better than that of PESF-SHCC due to its mechanical properties. This study demonstrated an effective approach for reducing required development length of lap spliced rebar by using SHCC materials.

• Journal of Sensor Science and Technology
• /
• v.29 no.2
• /
• pp.89-92
• /
• 2020

Polytetrafluoroethylene (PTFE) fibers are widely used in the textile industry, filter media, membrane distillation, electronic appliances, and construction. In this study, PTFE-polyethylene oxide (PEO) fibrous membranes were fabricated by emulsion electrospinning; subsequently, pure PTFE nanofibers were obtained via sintering. PTFE-PEO electrospinning solutions were prepared using different weight ratios to determine the optimized condition. As the ratio of the PEO increased, the fiber structure improved. Scanning electron microscopy and Fourier-transform infrared spectroscopy observations indicate that PEO is removed and PTFE fused gradually to form bonds among them during sintering. The obtained pristine PTFE membrane demonstrated hydrophobicity at 143.6° water contact angle and oleophilicity at 0° oil contact angle, which is known to be utilized for oil/water separation. A simple separation experiment was performed to remove oil droplets from water. The PTFE membrane exhibited good chemical stability and a high surface-area-to-volume nanofiber ratio. These excellent properties suggest that it is applicable to oil/water separation in harsh chemical environments.

• Journal of Environmental Science International
• /
• v.22 no.10
• /
• pp.1353-1361
• /
• 2013

The objectives of this paper are the characterization of the pretreatment of wastewater by microfiltration (MF) membranes for river maintenance and water recycling. This is done by investigation of the proper coagulation conditions, such as the types and doses of coagulants, mixing conditions (velocity gradients and mixing periods), pH, etc., using jar tests. The effluent water from a pore control fiber (PCF) filter located after the secondary clarifier at Kang-byeon Sewage Treatment Plant (K-STP) was used in these experiments. Two established coagulants, aluminum sulfate (Alum) and poly aluminum chloride (PAC), which are commonly used in sewage treatment plants to treat drinking water, were used in this research. The results indicate that the optimal coagulation velocity gradients (G) and agitation period (T) for both Alum and PAC were 200-250 $s^{-1}$ and 5 min respectively, but the coagulation efficiencies for both Alum and PAC were lower at low values of G and T. For a 60 min filtration period on the MF, the flux efficiencies ($J/J_0$ (%)) at the K-STP effluent that were coagulated by PAC and Alum were 92.9 % and 79.9 %, respectively, under the same coagulation conditions. It is concluded that an enhanced membrane process is possible by effective filtration of effluent at the K-STP using the coagulation-membrane separation process.