Browse > Article
http://dx.doi.org/10.4334/JKCI.2012.24.2.111

Effects of Fiber Blending Condition and Expansive Admixture Replacement on Tensile Performance of Rebar Lap Splice in Strain-Hardening Cement-Based Composites (SHCCs)  

Ryu, Seung-Hyun (Dept. of Architectural Engineering, Chungnam National University)
Lee, Young-Oh (Dept. of Architectural Engineering, Chungnam National University)
Yun, Hyun-Do (Dept. of Architectural Engineering, Chungnam National University)
Publication Information
Journal of the Korea Concrete Institute / v.24, no.2, 2012 , pp. 111-120 More about this Journal
Abstract
This paper is a report about lap splice performance of rebar embedded in the strain-hardening cement-based composites (SHCCs) under monotonic and repeated tension loading. Ten mix proportions of cement-based composites such as SHCCs and normal concrete were investigated. The study parameters are comprised of (1) types of reinforcing fibers (polyethylene and steel fiber), (2) replacement levels of expansive admixture (EXA, 0% and 10%), and (3) compressive strength (30 and 100 MPa) of cement-based composites. Lap splice lengths (ld) of rebars in SHCC materials and normal concrete were 60% and 100% of splice length calculated by code requirements for structural concrete, respectively. Test results indicated that SHCCs materials can lead to enhancements in the lap splice performance of embedded rebar. All of the fiber reinforcement conditions (PE-SHCC and PESF-SHCC) considered in this study produced considerable improvements in the tensile strength, cracking behavior, and bond strength of lap-spliced rebar. Furthermore, adding EXA to SHCC matrix improved the tensile lap splice performance of rebar in SHCC materials. However, for controlling crack behavior, the performance of PE-SHCC was better than that of PESF-SHCC due to its mechanical properties. This study demonstrated an effective approach for reducing required development length of lap spliced rebar by using SHCC materials.
Keywords
lap splice; strain hardening cement-based composites (SHCCs); hybrid fiber; high strength; expansive admixture;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Chen, P. W. and Chung, D. D. L., "A Comparative Study of Concretes Reinforced with Carbon, Polyethylene, and Steel Fibers and Their Improvement by Latex Addition," ACI Materials Journal, Vol. 93, No. 2, 1996, pp. 129-146.
2 이현수, 한동엽, 한천구, 박문서, "팽창재 및 수축 저감제가 강섬유보강 초고성능 시멘트 모르타르의 기초적 특성과 수축 저감에 미치는 영향," 대한건축학회논문집 구조계, 22권, 12호, 2006, pp. 97-104.
3 Azizinamini, A., Pavel, R., Hatfield, E., and Ghosh, S. K., "Behavior of Lap-Spliced Reinforcing Bars Embedded in High-Strength Concrete," ACI Structural Journal, Vol. 96, No. 5, 1999, pp. 826-835.
4 Kaklauskas, G., Gribniak, V., Bacinskas, D., and Vainiunas, P., "Shrinkage Influence on Tension Stiffening in Concrete Members," Engineering Structures, Vol. 31, No. 1, 2009, pp. 1305-1312.   DOI   ScienceOn
5 Banthia, N. and Nandakumar, N., "Crack Growth Resistance of Hybrid Fiber Reinforced Cement Composites," Cement and Concrete Composites, Vol. 25, No. 1, 2003, pp. 3-9.   DOI   ScienceOn
6 Ezeldian, A. S. and Balaguru, P. N., "Bond Behavior of Normal and High-Strength Fiber Reinforced Concrete," ACI Materials Journal, Vol. 86, No. 5, 1989, pp. 515-524.
7 Hamad, B. S., Harajli, M. H., and Jumaa, G., "Effect of Fiber Reinforcement on Bond Strength of Tension Lap Splices in High-Strength Concrete," ACI Structural Journal, Vol. 98, No. 5, 2001, pp. 638-647.
8 Mihashi, H., Otsuka, K., Akita, H., and Kikuchi, T., "Bond Cracking and Tension Stiffening Properties of a Deformed Bar Embedded in HPSHCC," Advances in Construction Materials, Vol. 43, No. 1, 2007, pp. 173-180.
9 윤현도, 전에스더, 한병찬, 양일승, "합성섬유로 보강된 고인성 시멘트 복합체내에서의 철근 겹침이음 성능," 대한건축학회논문집 구조계, 21권, 12호, 2005, pp. 19-26.
10 국토해양부 제정 콘크리트 구조설계기준, 한국콘크리트학회, 기문당, 2007, 328 pp.
11 Fischer, G. and Li, V. C., "Influence of Matrix Ductility on Tension-Stiffening Behavior of Steel Reinforced Engineered Cementitious Composites (ECC)," ACI Structural Journal, Vol. 99, No. 1, 2002, pp. 104-111.
12 Li, V. C., Wang, S., and Wu, C., "Tensile Strain-Hardening Behavior of Polyvinyl Alcohol Engineered Cementitious Composites (PVAECC)," ACI Material Journal, Vol. 98, No. 6, 2001, pp. 483-492.
13 이영오, 윤현도, "팽창재 치환율에 따른 섬유보강 시멘트 복합체의 역학적 특성," 콘크리트학회 논문집, 22권, 4호, 2010, pp. 399-407.
14 전에스더, 윤현도, "보강 섬유 종류에 따른 고인성 시멘트 복합체내에서 철근의 겹침이음 성능," 콘크리트학회논문집, 19권, 2호, 2007, pp. 153-161.
15 JSCE-E-531, Test Method for Tensile Properties of Continuous Fiber Reinforcing Materials, 1999.