• 제목/요약/키워드: Polyamide-6(PA-6)

검색결과 62건 처리시간 0.039초

저온 충격강도 및 대전방지성 향상을 위한 개질 EPDM을 함유한 polyamide alloy의 제조 및 물성 (Preparation and Characterization of Polyamide/MEPDM Alloy to Improve a Low Temperature Impact Strength and Antistatic Property)

  • 이수;진석환
    • 한국응용과학기술학회지
    • /
    • 제28권3호
    • /
    • pp.299-305
    • /
    • 2011
  • Alloys of nylon(PA6) and ethylene-propylene-diene polymer, modified with maleic anhydride(MEPDM) were prepared using a melt kneading process. This study focuses on the effects of the content of MEPDM in PA6 blend on the mechanical and thermal properties of such blends where MEPDM is the dispersed phase. Mechanical properties were examined by stress-strain measurements and impact strength test. Both impact strength of PA6/MEPDM at room temperature and at $-20^{\circ}C$ were improved up to 400-550% with the amounts of MEPDM. However, PA6/MEPDM containing 3-5 wt% of MEPDM showed the about $700kg_f/m^2$ of the maximum tensile strength but 8.5 % of the lowest elongation. For certain compositions of PA6 with rubbery MEPDM, the interesting reduction of elongation is caused by the reaction of the polyamide amine end groups with maleic anhydride portion in MEPDM, that provided a reinforcement in the PA6 matrix. In addition, the introduction of antistatic agent on the surface of alloys causes significant reduction of their surface electrostatic resistance.

Coupling Agent를 이용한 Polyamide 6와 Polyester Elastomer의 반응동반 블랜드 (Melt viscosity and Morphology of Reactive Blends)

  • Byung Kyu Kim;Sang Hyun Baek;Lee Keun Yoon
    • 유변학
    • /
    • 제11권1호
    • /
    • pp.50-56
    • /
    • 1999
  • DGEBA(diglycidil ether of bisphenol A) 및 PBO(2-1,4 phenylene bis(2-oxazoline))를 coupling agent(CA)로, polyamide 6(PA 6)와 polyester elastomer(PEL)의 용융블렌드를 동방향 이축압출기에서 제조하였다. coupling agent, 특히 DGEBA의 첨가와 더불어 PA 6/PEL 블렌드는 물론 PA 6의 낫치 충격강도가 증가하였으며, 블렌드의 최대 충격강인화는 0.6% DGEBA 즉, 입자크기가 최소인 조성에서 나타났다. 미처리 저주파수 영역에서 블렌드의 용융점도는 기초수지 이상으로 증가하였다. 블렌드 뿐만 아니라 기초수지의 용융점도는 CA의 첨가와 더불어 증가하였으며, 그 효과는 DGEBA, PA 6 및 PA 6-rich 조성에서 더욱 뚜렷하였다.

  • PDF

Polymide 6에서 Cyclic Diphosphonate Ester와 Melamine의 난연 효과 (Flame Retardant Synergistic Performance between Cyclic Diphosphonate Ester and Melamine in Polyamide 6)

  • Wang, Xueli;Jiang, Jianming;Yang, Shenglin;Jin, Junhong;Li, Guang
    • 폴리머
    • /
    • 제32권2호
    • /
    • pp.125-130
    • /
    • 2008
  • A commercial cyclic diphosphonate ester (TPMP) and melamine (MA) was combined and added to polyamide 6 (PA6) to prepare the fire retardant PA6. An increase of the oxygen index to 28.6 as well as an improvement of the UL-94 classification to V-0 rating was observed. Cone measurements explained the rate of heat release (RHR) decreased and TGA showed the early decomposition and high solid residue due to co-addition of TPMP and MA, suggesting the occurrence of synergistic effect of TPMP and MA on fire resistance of PA6. The morphology of the char developed during combust ion showed the appearance of thick, intumescent cells on the surface of retardant PA6, which protects the underlying material from the action of the heat flux or flame and limits the diffusion of combustible volatile products towards the flame and oxygen.

Microfiltration/ultrafiltration polyamide-6 membranes for copper removal from aqueous solutions

  • El-Gendi, Ayman;Ali, Sahar;Abdalla, Heba;Saied, Marwa
    • Membrane and Water Treatment
    • /
    • 제7권1호
    • /
    • pp.55-70
    • /
    • 2016
  • Microfiltration/ultrafiltration (MF/UF) Adsorptive polyamide-6 (PA-6) membranes were prepared using wet phase inversion process. The prepared PA-6 membranes are characterized by scanning electron microscopy (SEM), porosity and swelling degree. In this study, the membranes performance has examined by adsorptive removal of copper ions from aqueous solutions in a batch adsorption mode. The $PA-6/H_2O$ membranes display sponge like and highly porous structures, with porosities of 41-73%. Under the conditions examined, the adsorption experiments have showed that the $PA-6/H_2O$ membranes had a good adsorption capacity (up to 120-280 mg/g at the initial copper ion concentration ($C_0$) = 680 mg/L, pH7), fast adsorption rates and short adsorption equilibrium times (less than 1.5-2 hrs) for copper ions. The fast adsorption in this study may be attributed to the high porosities and large pore sizes of the $PA-6/H_2O$ membranes, which have facilitated the transport of copper ions to the adsorption. The results obtained from the study illustrated that the copper ions which have adsorbed on the polyamide membranes can be effectively desorbed in an Ethylene dinitrilotetra acetic acid Di sodium salt ($Na_2$ EDTA) solution from initial concentration (up to 92% desorption efficiency) and the PA-6 membranes can be reused almost without loss of the adsorption capacity for copper ions. The results obtained from the study suggested that the $PA-6/H_2O$ membranes can be effectively applied for the adsorptive removal of copper ions from aqueous solutions.

Polycarbonate/Polyamide 6 블랜드의 상용성에 관한 연구 (A Study on the Compatibility of Polycarbonate/Polyamide 6 Blends)

  • 박태욱;이치규;허정림
    • 공업화학
    • /
    • 제4권3호
    • /
    • pp.601-615
    • /
    • 1993
  • PC/PA6 블랜드를 세 가지 서로 다른 방법으로 블랜드한 후 이들의 상용성에 관하여 조사하였다. DSC에 의한 열적 성질 측정결과, Tg는 전 조성에 있어 각각의 온도부근에서 나타나며, 융점과 결정화온도는 큰 변화가 없었다. SEM관찰 역시 PC, PA6 블랜드는 각각 5%의 아주 낮은 조성에서부터 상분리가 확인되었다. 또한 실험적으로 측정된 Tg값을 Flory- Huggins식에 도입하여 polymer-polymer interaction parameter(${\chi}_{12}$)값을 계산한 결과, solution casting, solution precipitation, 압출블랜드의 경우 0.0381, 0.0411, 0.0418로 각각 계산되었으며, ${\chi}_{12}$의 임계값 $({\chi}_{12})_c$가 0.0271로 계산됨에 따라 결국 PC/PA6 블랜드는 전 조성에 걸쳐 상용성이 부족하였다.

  • PDF

서모트로픽 액정폴리머와 폴리아미드6으로 성형된 얇은 복합재료의 미세구조형태 (Microstructural Morphology of Molded Thin Composites of Thermotropic Liquid Crystalline Polymer and Polyamide 6)

  • 최낙삼;최기영;하성규
    • 대한기계학회논문집A
    • /
    • 제24권7호
    • /
    • pp.1703-1711
    • /
    • 2000
  • Microstructural morphology of molded composites of thermotropic liquid crystalline polymer(LCP) and polyamide 6 (PA6) has been studied as a function of epoxy fraction. Injection-moulding of a thin composite plaque at a temperature below the melting point of the LCP fibrils by suing the extruded LCP/PA6 pellets produced multi-layered structures: 1) the surface skin layer with thickness of 65-120 ym exhibiting a transverse orientation, 2) the sub-skin layer with an orientation perpendicular to the surface skin, i.e. in the flow direction, 3) the core layer with arc-curved flow patterns. Similar microstructural orientations were observed in the respective layers for the composite plaques with different fractions of epoxy.

그래핀/탄소나노튜브(FCN) 첨가에 따른 Polyamide-Nylon 6의 기계적 특성에 미치는 영향 (Effect of Adding Graphene/Carbon Nanotubes (FCN) on the Mechanical Properties of Polyamide-Nylon 6)

  • 여승준;신해름;노우승;김만태
    • 한국산업융합학회 논문집
    • /
    • 제26권6_3호
    • /
    • pp.1297-1303
    • /
    • 2023
  • Research on enhancing the mechanical strength, lightweight properties, electrical conductivity, and thermal conductivity of composite materials by incorporating nano-materials is actively underway. Thermoplastic resins can change their form under heat, making them highly processable and recyclable. In this study, Polyamide-Nylon 6 (PA6), a thermoplastic resin, was utilized, and as reinforcing agents, fused carbon nano-materials (FCN) formed by structurally combining Carbon Nanotube(CNT) and Graphene were employed. Nano-materials often face challenges related to cohesion and dispersion. To address this issue, Silane functional groups were introduced to enhance the dispersion of FCN in PA6. The manufacturing conditions for the composite materials involved determining the use of a dispersant and varying FCN content at 0.05 wt%, 0.1 wt%, and 0.2 wt%. Tensile strength measurements were conducted, and FE-SEM analysis was performed on fracture surfaces. As a result of the tensile strength test, it was confirmed that compared to pure PA6, the strength of the polymer composite with a content of 0.05 wt% was improved by about 60%, for 0.1 wt%, about 65%, and for 0.2 wt%, the strength was improved by 50%. Also, when compared according to the content of FCN, the best strength value was shown when 0.1 wt% was added. The elastic modulus also showed an improvement of about 15% in the case of surface treatment compared to the case without surface treatment, and an improvement of about 70% compared to pure PA6. Through FE-SEM, it was confirmed that the matrix material and silane-modified nanomaterial improved the dispersibility and bonding strength of the interface, helping to support the load evenly and enabling effective stress transfer.

Polyamide 6 입자 및 CTBN 첨가 기술에 따른 에폭시/탄소섬유 복합재의 강인화 효과 및 기계적 특성 (Effect of Mechanical and Toughening Characteristics of Epoxy/Carbon Fiber Composite by Polyamide 6 Particles, CTBN Addition Technology)

  • 배성열;이교문;;석지훈;최재완;손우혁;김윤해
    • Composites Research
    • /
    • 제36권5호
    • /
    • pp.355-360
    • /
    • 2023
  • 에폭시계 탄소섬유복합재는 고유의 높은 취성특성으로 인해 산업 응용에 적합성에 한계로 인성 특성을 향상시키기 위한 광범위한 연구가 진행되고 있다. 본 연구는 최소 함량을 활용하는 데 중점을 두고 PA6입자(pPA6)와 CTBN에 의한 인성 메커니즘을 평가하는 데 초점을 맞춰 Mode I 파단 인성 및 인장강도 분석을 통해 다양한 농도의 p-PA6와 CTBN 첨가제, 즉 0.5, 1, 2.5 및 5 phr의 영향을 평가하였다. p-PA6는 1 phr의 비교적 낮은 비율에서 인성이 강화되었으며, 인장강도를 유지하면서 동시에 향상된 인성에 기여하는 지속적인 파단 거동으로 나타났다. 또한, p-PA6의 입자 응집에 영향에 의해 전체적인 인성 메커니즘에 영향을 미치는 것을 확인하였다. CTBN 첨가는 2.5 phr 이상의 높은 농도에서 인성의 증가하나, 인장강도의 감소를 동반하고 취성을 나타내는 기존의 복합재와 유사한 파단 거동을 관찰하였으며, p-PA6, CTBN 두 첨가 기술은 특정 농도 조건에서 인장강도를 미세하게 향상시키는 것으로 확인하였다. 해당 결과를 통해 p-PA6, CTBN 강화 기술 적용에 최적화된 조건이 확립하였다.

Development of membrane blend using casting technique for water desalination

  • El-Gendi, A.;Ali, S.S.;Ahmed, S.A.;Talaat, H.A.
    • Membrane and Water Treatment
    • /
    • 제3권3호
    • /
    • pp.201-209
    • /
    • 2012
  • Membrane separation technologies have some of advantages are considered a better alternative to traditional methods. Research of novel membranes is very vital for covering the higher required of membrane in several purposes like water desalting technology. In this work polyamide-6/cellulose acetate (PA-6/CA) blend membrane was developed according to the wet phase inversion system. The structures of the prepared membranes were examined by scanning electron microscopy (SEM). SEM images showed uniform particles distribution in the prepared membranes. Moreover, SEM images revealed that the membranes have relatively uniform surface (PA-6/CA). PA-6/CA blend membranes systems are evaluated by using synthetic NaCl solution. The separation performance showed that salt rejection increased with increasing of heat treatment of the casted films and it was improved with increasing of operating pressure.