• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.2
• /
• pp.57-62
• /
• 2003

Nano-bending method is presented to measure the Poisson's ratio of thinfilms for MEMS (Micro-Electro-Mechanical Systems) applicaiton. The douvle-ring specimen is designed and fabricated based on the surface micromachining process to facilitate the measurement of the Poisson's ratio. The Poisson's ratio can be obtained through analyzing the linear load-displacement relationship of the double ring specimen subjected to nano-indenter loading. The Present nano-bending mehod is an in-situ measurement approach due to the compatibility to the surface micromachining process. The Poisson's ratio is locally obtained at the location of the double ring specimen with micro dimension. To validate the nano-bending method, the Poisson's ratio of LPCVD (Low Pressure Chemical Vapor Deposition) poly-silicon with thickness of 2.3㎛ is investigated. Experimental results reveal that the Poisson's ratio of the poly-silicon film is 0.2569. The standard deviation of the nano-bending measurement for the stiffness of double ring specimens is 2.66%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1030-1033
• /
• 2003

This paper presents the deposition characterization of polycrystalline silicon films by the HWCVD(Hot-wire Chemical Vapor Deposition) method at low substrate($300^{\circ}C$). The filament temperature, pressure and $SiH_4$ concentration were determined to be a critical parameter for the deposition of poly-Si films. Series A was deposited under the conditions of $1380^{\circ}C$(Tf), 100 mTorr and $2{\sim}10%\{SiH_4/(SiH_4+H_2)\}$ for 60 min. Series B was deposited under the conditions of $1400{\sim}1450^{\circ}C$ (Tf), 30 mTorr and $2{\sim}12%$ for 60 min. The physical characteristics were measured by Raman and FTIR spectroscopy, dark and photoconductivity measurements under AM1.5 illumination.

• Journal of the Semiconductor & Display Technology
• /
• v.2 no.2
• /
• pp.9-15
• /
• 2003

This paper proposes a thickness measurement method of silicon-oxide and poly-silicon film deposited on 12" silicon wafer for spin etcher. Halogen lamp is used as a light source for generating a wide-band spectrum, which is guided and focused on the wafer surface through a optical fiber cable. Interference signal from the film is detected by optical sensor to determine the thickness of the film using spectrum analysis and several signal processing techniques including curve-fitting and adaptive filtering. Test wafers with three kinds of priori-known films, polysilicon(300 nm), silicon-oxide(500 nm) and silicon-oxide(600 nm), are measured while the wafer is spinning at 20 Hz and DI water flowing on the wafer surface. From experiment results the algorithm presented in the paper is proved to be effective with accuracy of maximum 0.8% error.rror.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.496-498
• /
• 2005

We reported that high dielectric hafnium oxide nano-film deposited by thermal atomic layer deposition on the poly-silicon film (poly-Si). The poly -Si film was produced by plasma enhanced chemical vapor deposition and excimer laser annealing. We used the hafniu m chloride ($HfCl_4$) and water as the precursors and analyzed the hafnium oxide film by transmission electron microscope and secondary ion mass spectrometer. Hafnium oxide produced by the ALD method showed very good coverage on the rough surface of poly-Si film. While deposited with 200 cycles, these hafnium oxide films revealed a relatively smooth surface and good uniformity, but the cumulative roughness produced by the incomplete reaction was apparent when the amount of deposition cycle increased to 600 cycles.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.240-240
• /
• 2006

Thin films of poly(vinyl cinnamate) (PVCi) were prepared on indium tin oxide (ITO) glass and silicon substrates by conventional spin coating and subsequent drying process. The thicknesses of the films ranged 50-120 nm. The films' surface was treated by rubbing, ultraviolet exposure or their combinations in various ways with changing rubbing strength and exposure dose. These films were examined in detail in the aspects of surface morphology and chain orientation. Further, the anchoring and orientation behaviors of liquid crystals on the film surfaces were investigated. All the results will be discussed in detail.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1113-1116
• /
• 2003

This review article gives a comprehensive compilation of recent developments in low temperature deposited poly Si flms, also known as microcrystalline silicon. The development of various ion energy suppression techniques for plasma enhanced chemical vapour deposition and ionless depositions such as HWCVD and expanding thermal plasma, and their effect on the material and solar cell efficiencies are described. A correlation between ef.ciency and the two most important process parameters, i.e., growth rate and process temperature is carried out. Finally, the application of these poly Si cells in multijunction cell structures and the best efficiencies worldwide by various deposition techniques are discussed.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.5
• /
• pp.339-343
• /
• 1999

This paper reports the characteristics of poly-Si TFT unitary CMOS circuits fabricated with various techniques, in order to investigate the optimum process conditions. The active films were deposited by PECVD and LPCVD using $SiH_4\; and\; Si_2H_6$ as source gas, and annealed by SPC and ELA methods. The impurity doping of the oource and drain electrodes was performed by ion implantation and ion shower. In order to investigate the AC characteristics of the poly-Si TFTs processed with various methods, we have examined the current driving characteristics of the polt-Si TFT and the frequency characteristics of 23-stage CMOS ring oscillators. Ithas been observed that the circuits fabricated using $Si_2H_6$ with low-temperature process of ELA exhibit high switching speed and current driving performances, thus suitable for real application of large area electronics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.2
• /
• pp.156-161
• /
• 2007

This paper describes the characteristics of polycrystalline ${\beta}$ or 3C (cubic)-SiC (silicon carbide) thin films heteroepitaxailly grown on Si wafers with thermal oxide. In this work, the poly 3C-SiC film was deposited by APCVD (atmospheric pressure chemical vapor deposition) method using HMDS (hexamethyildisilane: $Si_{2}(CH_{3}_{6})$ single precursor. The deposition was performed under various conditions to determine the optimized growth conditions. The crystallinity of the 3C-SiC thin film was analyzed by XPS (X-ray photoelectron spectroscopy), XRD (X-ray diffraction) and FT-IR (fourier transform-infrared spectometers), respectively. The surface morphology was also observed by AFM (atomic force microscopy) and voids or dislocations between SiC and $SiO_{2}$ were measured by SEM (scanning electron microscope). Finally, depth profiling was invesigated by GDS (glow discharge spectrometer) for component ratios analysis of Si and C according to the grown 3C-SiC film thickness. From these results, the grown poly 3C-SiC thin film is very good crystalline quality, surface like mirror and low defect. Therfore, the poly 3C-SiC thin film is suitable for extreme environment, Bio and RF MEMS applications in conjunction with Si micromaching.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.476-479
• /
• 2000

In this study, mesh-type PECVD system was suggested to minimize the hydrogen concentration. The main structural difference between the triode system and a conventional system is that a mesh was attached to the substrate holding electrode. We investigated several conditions to compare with conventional PECVD. The main effect of mesh was to minimize the substrate damage by ion bombardment and to enhance the surface reaction to induce hydrogen desorption. It was also found that hydrogen concentration decreased but deposition rate increased as increasing applied dias. Applied DC bias enhanced sputtering process. Intense ion bombardment causes the weakly bonded hydrogen or hydrogen-containing species to leave the growing film and increased adatom mobility. Furthermore, addition of hydrogen gas enhance the surface diffusion of adatom. The structural properties of poly-Si films were analyzed by scanning electron microscopy(SEM).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.683-685
• /
• 2003

We report on a surface planarization process that produces more planar surface than previous sequential lateral solidification crystallized poly silicon films. By applying the single shot laser irradiation with optimum energy density ($(817mJ/cm^{2})$ on the ridge area after SLS crystallization, the ridge height can be decreased.