• 대한화학회지
• /
• 제46권1호
• /
• pp.19-25
• /
• 2002

우리는 고분자 물질들에 대해서 전위와 전류 밀도의 변화를 측정하였다. 온도와 pH를 포함하여 전위와 속도에 대한 영향을 주는 여러 요인들에 밝히기 위하여, 연구 결과들이 주위 깊게 조사되었다. 양극 해리에 대한 Tafel 기울기는 이들 조건 하에서 분극 효과로 결정되었다. 각 경우에 최적 조건들이 확립되었다. 두 번째 양극 전류 밀도 피크와 최대 전류 밀도는 상대적 분극 감도$(I_r/I_f)$로 지정되었다. 최적 조건에서의 분극 효과를 바탕으로, 질량 전달 계수$({\alpha})$는 양극 해리에 대한 Tafel 기울기에 의해서 결정되었다.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1994년도 추계 학술발표회
• /
• pp.54-54
• /
• 1994

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.345-349
• /
• 2003

The quantity, process and kinetics of di-(2-ethylhexyl)phthalate (DEHP) migration in the 30/70 and 40/60 poly(vinylchloride) (PVC)/DEHP blends were investigated using gas chromatograph. A thin and flexible PVC sheet was soaked in surrounding medium (SM) of water/ethanol mixture and acetonitrile with constant stirring to release DEHP. By observed concentration of DEHP in the SM, it is found that acetonitrile is more intense in DEHP migration than water/ethanol mixture. In addition the amount of extracted DEHP is proportional to the leaching temperature and added ratio of DEHP. The behavior of DEHP migration from flexible PVC sheets was described by the Ficks's law with $2.72-10.1\;{times}\;10^{-10}$ cm²/s of the diffusion coefficients.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3592-3596
• /
• 2011

A novel poly(vinylchloride)-based membrane sensor using $N^1$,$N^3$,$N^5$-tris(2-(2,3-dihydroxybenzylamino)-ethyl)cyclohexane-1,3,5-tricarboxamide (CYCOENCAT, L) as ionophore has been prepared and explored as $Fe^{3+}$ selective electrode. The membrane electrode composed of ionophore, poly(vinylchloride) and o-nitropheyloctyl ether in the optimum ratio 4:33:63 gave excellent potentiometric response characteristics, and displayed a linear log[$Fe^{3+}$] versus EMF response over a wide concentration range of $1.0{\times}10^{-5}-1.0{\times}10^{-1}$ M with super nernstian slope of 28.0 mV/decade and the detection limit of $8.0{\times}10^{-6}$ M. The proposed ion selective electrode showed fast response time (< 15 s), wide pH range (3.0-7.0), high non-aqueous tolerance (up to 20%) and adequate long life time (120 days). It also exhibited very good selectivity for $Fe^{3+}$ relative to a wide variety of alkali, alkaline earth, transition and heavy metal ions. Further, the analytical applicability of the sensor was tested as an indicator electrode in the potentiometric titration of $Fe^{3+}$ with EDTA.

• 대한화학회지
• /
• 제45권2호
• /
• pp.138-160
• /
• 2001

이 연구에서 온도, pH, 효소, 그리고 염의 첨가에 따라 부식(산화)전위에 영향을 주 인자들을 알아보기위해 비수용액 poly(vinylchloride)(PVC)와 poly(carbonate)(PC) 의 산화전위와 전류밀도를 측정하였다. Tafel 기울기는 분극곡선의 Tafel polt으로부터 결정되어졌다. 전달게수 ${\alpha}$는 기울기 (1-${\alpha}$)nF/2.3RT에서 얻어질 수 있고 인식된 전극 반응은 모든 조건에서 비가역적으로 나타났다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.371-372
• /
• 2006

Poly(${\varepsilon}-caprolactone$) (PCL) is a highly crystalline polymer that is miscible with several amorphous polymers including chlorinated polyether, poly(vinylchloride), poly(hydroxyether) and Bisphenol A polycarbonate. The crystallization behavior of miscible blend of amorphous/crystalline polymers has widely been studied. Generally a depression of the crystallization ability has been found with addition of amorphous component because of the reduction of chain mobility, the change of free energy of nucleation as a result of a specific interaction, and so on [1]. In this work, for the first time, the blend of PCL and copolymer of polyurethane containing polycaprolactone as a soft segment is considered. The structural similarity of TPU soft segment with PCL affects on formation of the miscible component and crystallization behavior of PCL in the blend. This has been studied using differential scanning calorimetry (DSC) and Wide-angle X-ray Scattering (WAXS).

• 분석과학
• /
• 제15권1호
• /
• pp.72-79
• /
• 2002

Di-(2-ethylhexyl)phthalate (DEHP) 가 가소제로 첨가되 있는 poly(vinylchloride) (PVC) 제품의 사용중에는 DEHP가 방출되어 나올 가능성이 있다. 이때 추출되는 DEHP의 정량적인 측정법에는 여러가지가 있으나 그 방법에 따라 용출량에 많은 차이가 발생하기 때문에 측정방법과 결과에 대한 비교분석은 시급한 과제라 할 수 있다. 이를 평가하기 위하여 PVC를 주원료로 하는 혈액백과 수액백에서의 DEHP 용출에 관한 연구를 기체 크로마토그래프와 분광광도계를 이용한 두 가지 방법으로 수행하였다. 5종류의 PVC 백을 실험 재료로 선택하여 $40{\times}10{\times}0.4mm$ 크기의 시편을 제조하고 이를 용출액에 담가 1시간동안 DEHP를 용출하였다. 기체 크로마토그래프로 DEHP 를 검출한 결과 시료에 따라 $23.2{\sim}70.9{\mu}g/mL$ 의 DEHP가 용출되는 것을 알 수 있었다. 반면 PVC백 안에 용출액을 주입하여 1시간 동안 DEHP를 용출시키고 분광 광도계를 이용하여 DEHP를 검출한 결과 $24.8{\sim}41.3{\mu}g/mL$의 DEHP가 용출되었다. 용출 조건과 실험방법에 따라 서로 다른 수치를 보임을 알 수 있었고 단위 시간 단위 면적 당 용출되는 DEHP의 양은 일정하다는 전제 하에 두 실험의 결과를 비교하고 환산하는 식을 구하여 적용한 결과 두 측정방법에서 얻어진 용출량이 거의 일치하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권8호
• /
• pp.1127-1132
• /
• 2006

A new salicylate-selective electrode based on the complex N,N'-1,4-butylene bis(3-methyl salicylidene iminato) copper(II) as the membrane carrier was developed. The electrode exhibits a good Nernstian slope of 59.1 ${\pm}$ 1.0 mV/decade and a linear range of $1.0\;{\times}\;10^{-6}$-1.0 M for salicylate. The limit of detection was $5.0\;{\times}\;10^{-7}$ M. It has a fast response time 10 s and can be used for more than three months. The selective coefficients were determined by the fixed interference method (FIM) and could be used in the pH range 4.5-10.5. It was employed as an indicator electrode for direct determination of salicylate in pharmaceutical samples.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제5권4호
• /
• pp.405-412
• /
• 2005

In this paper, we verified the failure mechanism of the discolored masking tape wrapped around the wire and studied an improved case study as well. Masking tapes are poly(Vinylchloride-co-Methyl methacrylate) (PVC) and the wire connecting with indoor/outdoor components of the air conditioner is chloroprene(CR). The masking tape under. the ultraviolet ray was accelerated to discolor fivefold. The results determined reveal the discoloration of masking tapes as an elution of the additives, dephenyl Amine series antioxidants, in the connecting wire. When changed dephenyl Amine series to phenol series, we found that the degree of discoloration was dramatically decreased. Due to stink of Thiourea and Thiuram monosulfide, as accelerators in CR wire, we controlled the vulcanization temperature and time without using these accelerators and could get the wire not to smell bad with the equal mechanical properties.

• 전기화학회지
• /
• 제11권1호
• /
• pp.59-63
• /
• 2008

Poly (vinylchloride) (PVC) membrane electrodes based on neutral carrier, tetracycline was prepared as an active sensor for Hg(II) ion, and tested in different contents of the potassium tetrakis (4-chlorophenyl) borate (KTpClPB) as lipophilic salt. Bis (2-ethylhexyl) sebacate (DOS), bis(l-butylpentyl) adipate (BBPA), 2-nitrophenyl octyl ether (NPOE) and dibutyl phthalate (DBP) were used as diverse plasticizing solvent mediators. This electrode shows excellent potentiometric response characteristics and display good linearity with log $[Hg^{+2}]$ versus EMF response, over a range of concentrations between $10^{-7}$ and $10^{-3}M$. With 30.8mV/decade Nernstian slope, the detection limit was $6.9{\times}10^{-9}M$ and the response time was less than 20s. The proposed electrode yields very good selectivity for mercury (II) ion over many cations such as alkali, alkaline earth, transition and heavy metal ions. And it shows a very stable potential values in a wide pH range. This reliable electrode prepared was kept at least a month without considerable alteration in their response to Hg (II) ion.