• Korean Journal of Ecology and Environment
• /
• v.36 no.2 s.103
• /
• pp.181-190
• /
• 2003

An investigation was conducted on the aquatic environment of the Okchon Stream watershed six times from May to September 2002. The results of investigation revealed that variation of environmental factors were quite significant for each stream and reach, showing a significant difference between running water and stagnant water. Aquatic nutrients were relatively low in the upstream, gradually increasing as the influx of treated wastewater into the stream increased. This suggests that the point source definitely affected the nutrient content of the stream. In particular, the variations of SRP and $NH_4$ were very distinct in the watershed compared to other nutrients. Thus, it can be considered as a major factor in evaluating the effect of treated wastewater. Immediately after the influx of treated waste-water, the average content of SRP rose to 919.3 ${\mu}g$ P/l. This was a very effective level in the watershed, suggesting that the percentage of the nutrients in the water was controlled by the content of P. The constant supply of treated wastewater was found to be a critical factor in triggering the increase in chl-a in the embayment of the stream. With the proliferation of the blue-green algae, the content of chl- a ranged 234.5${\sim}$1,692.2 ${\mu}g/l$. The maximum standing crops exceeded $1.0{\times}10^6$ cells/ml in August, which was more than 200 times the level for red tide in the freshwater. This result was well reflected in other environmental factors, with 100% of AFDM/TSS reflecting the severity of water pollution by algae. Therefore, the reduction of P and N con-tents in the treated wastewater is critical in improving the aquatic environment of the stream as well as water quality management for the reservoir.

• Journal of Fashion Business
• /
• v.9 no.6
• /
• pp.160-174
• /
• 2005

Despite the decrease in the number of children due to low birth rate, the domestic children's apparel market has been achieving steady growth as family income is rising thanks to more opportunities for working women, parents spend more on their children, and they prefer brand products that make their children look special. In addition, the market is suffering from hard competition as large enterprises have joined the race. The present study purposed to survey the children's apparel market in Korea, which is in a transitional period, and to contribute to the development of the market with Korean brands. For this purpose, we analyzed the characteristics of children's apparel brands in the 21st century based on the current state of the domestic children's apparel market and, based on the findings, forecasted the future trend of children's apparel brands, suggested improvements for expected problems, proposed standards for coping with changes such as diversification, high quality and differentiation in the children's apparel market, and provided consumers with information on how to purchase products. According to the result of analyzing the characteristics of children's apparel brands in the 21st century, brands are categorized largely into four types - life cultural brands, functional product brands, character brands and brands advancing to China. Life cultural brands equipped with all necessities for children are expanding, and with the deepening social problems of environmental pollution and the reduction of the child population, functional products made of environment-friendly materials are spreading widely, targeting infants and children. Furthermore, for extending age targets and diversifying products, children's apparel is using characters. The use of characters is expected to have a considerable effect on the growth of brands because children are more subjective as consumers than before and they are more easily persuaded with characters. Domestic children's apparel brands advancing to China have a high expectation of success in overcoming the limitation of the local market that has reached its peak and growing into global brands. Korean apparel makers are struggling to overcome the depressed domestic market, to recover consumers' consumption, to cope with market opening, to pursue high value of sensibility and to expand the seniors' market, etc. In this situation, future trends of children's apparel brands will be the expansion of family brands, brand totalization, quality price, niche market (pre-teen market), etc. In response to these trends, we made the following suggestions for improvement. 1. Children's apparel brands are evolving into family brands as well as into total brands through voluming. Today, however, apparel makers are advancing to the children's apparel market with the concept of adults' apparel and, as a result, children's apparel is merely adults' apparel of reduced size, having problems in design, color and materials. Thus, apparel makers must develop design considering the wide range of size and the characteristics of children's apparel, strengthen sourcing abilities to create revenues, and make thorough survey of customers to find common denominators between adults' apparel and children's apparel considering that characteristic that the target class is different from the buyer class. Furthermore, they must make active investments in human resources, develop outstanding products through advanced planning and design, and support marketing techniques and management systems to stores. 2. As the declining birth rate will continue to have a negative effect on the market, it may be difficult to expand the market size but there is still a margin for growth through high-sensibility and high-quality products. The competitiveness of brands is determined by their market shares. Accordingly, concepts should be specialized according to lifestyle, customers' diverse needs should be satisfied, and cross-coordination should be achieved within a brand. 3. Considering Korean parents who do not spare investment in their children despite shrinking consumption, functional products must be high value-added goods that can enhance efficiency. However, in the current situation of the infants' apparel industry where a textile manufacturer supply its products to multiple brands, it is difficult to develop unique products only based on materials. Thus, it is considered urgent to appeal to consumers not by relying on materials only but by finding methods of applying their own characters to children's dress.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.962-973
• /
• 2017

Concerns about an air pollution are gradually increasing at home and abroad. The automotive and fuel researchers are trying to reduce emissions and greenhouse gases of vehicles through a research on new engine designs and innovative after-treatment systems using clean fuels (eco-alternative fuel) and fuel quality improvements. In this paper, we stduy the emission characteristics of greenhouse gases on seven vehicles using gasoline, diesel, and LPG by legal test mode in domestic and abroad.(Urban mode, Highway mode, rapidly acceleration and deceleration, using air conditioner, low temperature condition) Regardless of fuels, most of the greenhouse gases tend to show the worst results in cold FTP-75 mode. In the case of A vehicles (2.0 MPI) and B vehicles (2.4 GDI) using a gasoline fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. But G vehicles(LPLi) have different emission characteristics from another vehicles. In the case of A vehicles (2.0 w/o DPF) and B vehicles (2.2 with DPF) using a diesel fuel, the factors that increase greenhouse gases are in order of a rapidly acceleration and deceleration, using air conditioner, low temperature condition. However, the factor of F vehicles are in order of low temperature condition, using air conditioner, rapidly acceleration and deceleration. In conclusion, it will be an effective method to apply different technologies of emission reduction for each fuel.

• Journal of Distribution Science
• /
• v.7 no.4
• /
• pp.47-56
• /
• 2009

The purpose of this study is to present an alternative improving the efficient and reasonable of the physical distribution system management is influenced by many factors. Therefore, the study depends on the documentary method and survey method to achieve the purpose of this study. The major components of a physical distribution system are refers to as elements, include warehouse·storage system, transportation system, inventory system, physical distribution information system. The factors used in this study are ① factor of product(quality·A/S·added value of product·adaption of product·technical competitive power to other enterprises), ② factor of market(market channel·kinds of customer·physical distribution share), ③ factor of warehouse·storage(warehouse design·size·direction·storage ability·warehouse quality), ④ factor of transportation(promptness·reliability·responsibility·kinds of transportation·cooperation united transportation system·national transportation network), ⑤ factor of packaging (packaging design·material·educating program·pollution degree measure program), ⑥ factor of inventory(ordinary inventory criterion·consistence for inventories record), ⑦ factor of unloaded(unloaded machine·having machine ratio), ⑧ factor of information system (physical distribution quantity analysis·usable computer part), ⑨ factor of physical distribution cost(sales ratio to product) ⑩ factor of physical distribution system(physical distribution center etc). The implication of this study can be summarized as follows: ① In firms that have not adopted a systems integrative approach, physical distribution is a fragmented and often uncoordinated set of activities spread throughout various functions with function having its own set of priorities and measurements. ② The physical distribution is recognized as more an important strategic factor than a simple cost reduction factor, ③ It can be used a strategic competition tool to enterprise.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.89-97
• /
• 2020

This experiment was conducted at Sancheong from 2013 to 2015. The objective of this study was to establish the seeding rate, and to clarify the optimum nitrogen fertilizer level for rye seed production in the southern area of Korea. We employed Korean rye cultivar 'Gogu' in this test. The experimental design was a split-plot design with three replications. A split-plot design was used with three seeding levels (3, 5, and 7 kg 10 a^-1) on the main plots and other treatments fully randomized in sub-plots. A factorial arrangement of treatments included three different nitrogen fertilizer levels (0, 3, 6, and 9 kg 10 a^-1). The grain yields of rye affected by increasing the seeding rate. The number of spike per m² and immature grain weight was increasing, while the fertility rate and the number of grain per spike were decreased as seeding rate were increased from 3 kg 10 a^-1 to 7 kg 10 a^-1. The percentage of a productive tiller, 1-liter weight, and 1000-grain weight also decrease by increasing seeding but the grain yields of rye had less effect. There was an increase in the number of spike per m², the number of grain per spike, and grain yields as nitrogen fertilizer level was increased from 0 kg 10 a^-1 to 9 kg 10 a^-1 and followed a delaying heading and an increasing lodging of the plant. But grain yields did not affected by the interaction of seeding rate × nitrogen fertilizer levels. The best seeding rate and nitrogen fertilizer level for rye seed production were 5 kg and 3 kg 10 a^-1, respectively, considering seed and fertilizer reduction and the prevention of pollution by excess fertilization.

• Journal of Appropriate Technology
• /
• v.7 no.2
• /
• pp.136-143
• /
• 2021

Pacific island countries, including Kiribati, are suffering from a shortage of essential resources as well as a reduction in their living space due to sea level rise and coastal erosion from climate change, groundwater pollution and vegetation changes. Global activities to solve these problems are being progressed by the UN's efforts to implement SDGs. Pacific island countries can adapt to climate change by using abundant marine resources. In other words, seawater plants can assist in achieving SDGs #2, #6 and #7 based on SDGs #14 in these Pacific island countries. Under the auspice of Korea International Cooperation Agency (KOICA), Korea Research Institute of Ships and Ocean Engineering (KRISO) established the Sustainable Seawater Utilization Academy (SSUA) in 2016, and its 30 graduates formed the SSUA Kiribati Association in 2017. The Ministry of Oceans and Fisheries (MOF) of the Republic of Korea awarded ODA fund to the Association. By taking advantage of seawater resource and related plants, it was able to provide drinking water and vegetables to the local community from 2018 to 2020. Among the various fields of education and practice provided by SSUA, the Association hope to realize hydroponic cultivation and seawater desalination as a self-support project through a pilot project. To this end, more than 140 households are benefiting from 3-stage hydroponics, and a seawater desalination system in connection with solar power generation was installed for operation. The Association grows and supplies vegetable seedlings from the provided seedling cultivation equipment, and is preparing to convert to self-support business from next year. The satisfaction survey shows that Tarawa residents have a high degree of satisfaction with the technical support and its benefits. In the future, it is hoped that SSUA and regional associations will be distributed to neighboring island countries to support their SDGs implementations.

• Journal of Life Science
• /
• v.32 no.4
• /
• pp.310-317
• /
• 2022

Recently, interest in the harmful factors of particulate matter (PM), a major component of air pollution, has been increasing. In particular, PM_2.5 with a diameter of less than 2.5 ㎛ is well known to induce oxidative stress accompanied by autophagy in human lung epithelial cells. However, studies on whether PM_2.5 increases autophagy under oxidative stress and whether this process is reactive oxygen species (ROS)-dependent are insufficient. Therefore, in this study, we investigated whether PM_2.5 promotes autophagy through the generation of ROS in human alveolar epithelial A594 cells. According to our results, cells co-treated with PM_2.5 and hydrogen peroxide (H₂O₂) showed a lower cell viability than cells treated with each alone, which was associated with increased total and mitochondrial ROS production. The co-treatment of PM_2.5 and H₂O₂ also increased autophagy induction, which was confirmed through Cyto-ID staining, and the expression of autophagy biomarker proteins increased. However, when ROS generation was artificially blocked by N-acetyl-L-cysteine pretreatment, the reduction in cell viability and induction of autophagy by PM_2.5 and H₂O₂ co-treatment were markedly attenuated. Therefore, the present results suggest that PM_2.5-induced ROS generation may play a critical role in autophagy induction in A549 cells.

• Journal of Applied Biological Chemistry
• /
• v.65 no.4
• /
• pp.349-355
• /
• 2022

In this study, we sought to identify a soil stabilizer that can be applied to paddy fields vulnerable to arsenic (As) pollution. To this end, we conducted a pot experiment in which we evaluated the effects of different stabilizers on the bioavailability of As in paddy soil. As candidate stabilizers, we assessed calcium superphosphate (CSP), sulfur, and steel slag, which were applied at the rates of 0.7 and 1.4, 0.1 and 0.2, and 7.0 and 14.0 Ma ha^-1, respectively. On day 67 after rice transplantation, we detected significantly lower concentrations of As in the solutions of paddy soil treated with 1.4 Ma ha^-1 CSP (96.9 ㎍ L^-1) and 0.2 Ma ha^-1 sulfur (207.2 ㎍ L^-1) compared with the As concentrations in control (314.5 ㎍ L^-1) and steel slag-treated (268.6-342.4 ㎍ L^-1) soil. Compared with the As concentrations in control brown rice (0.16 mg kg^-1), concentrations in brown rice were lowest in the pots treated with 1.4 Ma ha^-1 CSP (0.09 mg kg^-1). Furthermore, in response to CSP treatments, we detected increases in the weight of rice grains (50.0-50.4 g/pot) compared with the control (40.4 g/pot) and other treatments (26.9-48.1 g/pot), which we speculate could be attributed to the reduction in As toxicity to rice owing to a decline in soil solution As contents and the fertilization effect of the CSP treatment. Collectively, our findings indicate a high-level application of CSP (1.4 Ma ha^-1) to paddy soil has a comparatively beneficial effect in mitigating the bioavailability of As.

• Resources Recycling
• /
• v.32 no.1
• /
• pp.50-59
• /
• 2023

The amount of dust generated during the dissolution of scrap in an electric arc furnace is approximately 1.5% of the scrap metal input, and it is primarily collected in a bag filter. Electric arc furnace dust primarily consists of zinc and ion. The processing of zinc starts with its conversion into pellet form by the addition of a carbon-based reducing agent(coke, anthracite) and limestone (C/S control). These pellets then undergo reduction, volatilization, and re-oxidation in rotary kiln or RHF reactor to recover crude zinc oxide (60%w/w). Next, iron is discharged from the electric arc furnace dust as a solid called Fe clinker (secondary by-product of the Fe-base). Several methods are then used to treat the Fe clinker, which vary depending on the country, including landfilling and recycling (e.g., subbase course material, aggregate for concrete, Fe-source for cement manufacturing). However, landfilling has several drawbacks, including environmental pollution due to leaching, high landfill costs, and wastage of iron resources. To improve Fe recovery in the clinker, we pulverized it into optimal -sized particles and employed specific gravity and magnetic force selection methods to isolate this metal. A carbon-based reducing agent and a binding material were added to the separated coarse powder (>10㎛) to prepare briquette clinker. A small amount (1-3%w/w) of the briquette clinker was charged with the scrap in an electric arc furnace to evaluate its feasibility as an additives (carbonaceous material, heat-generating material, and Fe source).

• Korean Journal of Remote Sensing
• /
• v.39 no.5_1
• /
• pp.481-493
• /
• 2023

In high-density urban areas, the urban heat island effect increases urban temperatures, leading to negative impacts such as worsened air pollution, increased cooling energy consumption, and increased greenhouse gas emissions. In urban environments where it is difficult to secure additional green spaces, rooftop greening is an efficient greenhouse gas reduction strategy. In this study, we not only analyzed the current status of the urban heat island effect but also utilized high-resolution satellite data and spatial information to estimate the available rooftop greening area within the study area. We evaluated the mitigation effect of the urban heat island phenomenon and carbon sequestration capacity through temperature predictions resulting from rooftop greening. To achieve this, we utilized WorldView-2 satellite data to classify land cover in the urban heat island areas of Busan city. We developed a prediction model for temperature changes before and after rooftop greening using machine learning techniques. To assess the degree of urban heat island mitigation due to changes in rooftop greening areas, we constructed a temperature change prediction model with temperature as the dependent variable using the random forest technique. In this process, we built a multiple regression model to derive high-resolution land surface temperatures for training data using Google Earth Engine, combining Landsat-8 and Sentinel-2 satellite data. Additionally, we evaluated carbon sequestration based on rooftop greening areas using a carbon absorption capacity per plant. The results of this study suggest that the developed satellite-based urban heat island assessment and temperature change prediction technology using Random Forest models can be applied to urban heat island-vulnerable areas with potential for expansion.