• Journal of Environmental Health Sciences
• /
• v.16 no.2
• /
• pp.1-10
• /
• 1990

This study was performed to evaluate a applicability of TCM(Texas Climatological Model) model to a industrial area sush as CUNSAN and a possibility to provide necessary informaitons for air quality management. The air pollutants were measured at 6 sampling sites of GUNSAN industrial area from june to july in 1989. The model was checked by comparing the observed data with estimated data. The meteorological data for wind direction and wind speed were obtained from the observatory station in GUNSAN. The results are summarized as follows. 1. Average concentrations of air pollutants at all sampling sites were SO$_{2}$ 0.011-0.019 ppm. NO$_{2}$ 0.012-0.017 ppm. CO 0.6-1.0 ppm. TSP 45.8-64.2 $\mu$g/m$^{3}$. 2. The emission amounts show that point source are in general higher than area source. 3. As a results of correlation analysis, relationship between SO$_{2}$ concentration in the observed value and estimated value showed positive significance.(r = 0.766) 4. The sulfer content of the 1.6% at present to 0.8%, which means a 53.3% reduction. By controlling stack height could be lowered 14.5%, but the effective way of emission control is use of the lower sulfer fuels than controlling stack height. 5. The ratio between SO$_{2}$ contration in the observed value and estimated value showed 1.05. There-fore, the TCM model was quite effective in predicting air quality in GUNSAN industrial area.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.2
• /
• pp.173-178
• /
• 2018

This study organizes scenarios on the power supply and demand plans considering the uncertainties and the portion of distributed energy resources. In analysing the scenarios, it estimates total electricity supply cost in the social aspect, natural gas demand and air pollutants emission including carbon dioxide. Also the analysis is performed to estimate the marginal cost of carbon dioxide reduction for the fuel switching from coal to liquified natural gas. In result, the social cost could be decreased by replacing some portion of renewable energy by LNG-based combined heat and power and delaying the construction of large base-load generators such as coal and nuclear plants. The marginal carbon dioxide reduction cost by fuel switching is in plausible range for fuel switching to be an option for carbon dioxide emission reduction when the social cost is considered.

• Environmental and Resource Economics Review
• /
• v.23 no.3
• /
• pp.435-451
• /
• 2014

This paper attempts to evaluate an environmental regulation program which enforces installation of filtering equipment to reduce major air pollutants from used diesel vehicles. A real option model is presented to incorporate fuel cost uncertainty and irreversibility of emission-reducing investment. A finite-life option based on finite difference method is developed to consider the limited life expectancy of used vehicles. After taking into account social benefits from emission reduction and costs from decreasing fuel efficiency after the adoption of filtering technology, the result finds overall positive performance of the Pollution Reduction Program. However, the result suggests that the Program be designed to be more specific to vehicle types to improve program performance.

• Journal of the Korean Society of Combustion
• /
• v.12 no.4
• /
• pp.47-56
• /
• 2007

Utilization of sewage sludge for industrial fuel should be considered in appropriate calory with low emission of environmental pollutants and the amount of sewage sludge for continuously long-time operation. For the low grade fuel(<4,000kcal/kg), one of proper processes is that coal and oil are added into sewage sludge to remove impurities and increase calory(>7,000kcal/kg) and the amount of fuel having sewage sludge. Recently, 2-step agglomeration has been attempted by secondarily agglomerate sewage sludge onto the primary nuclei formed by agglomeration of coal and oil. Furthermore, sawdust and waste oil can substitute about 1/3 each for coal and mineral oil consumed in this process, which will lead to securing alternative energy resources from environmental pollutants as well as cost reduction.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.6
• /
• pp.561-571
• /
• 2005

To introduce an emissions trading system for GHG that currently have no reduction requirements, the following should be considered as priorities: eliciting the participation of the industrial sector and linking GHG emission trading systems to the emissions trading system (implemented from July 2007) that has become part of national policy with the enactment of the Special Act. Two directions can serve as viable alternatives in that regard. One is a baseline-and-credit method based on incentive auctioning. This has the advantage of inducing participation through economic incentives without a reductions commitment. The downside of this method is that it requires vast investments, as well as the fact that reaching an agreement between participants and the government to decide an objective baseline is difficult. On the other hand, the cap-and-trade method set forth in the Special Act is attractive in that it can be integrated with the air pollutant emissions trading system, but it would be difficult to elicit the participation of the industrial sector in the absence of GHG emission reduction requirements. In the current situation, it would be preferable for the government to induce the participation of the industrial sector by devising a wide variety of incentives because taking part in the emissions trading system before reducing GHG emissions offers large incentives through learning by doing. The timing of GHG reduction commitments and emissions trading system implementation may be uncertain but their Implementation will be unavoidable. Thus the government needs to facilitate preparations for emissions trading of GHG in the future and continuously review its operation in integration with the air pollutant emissions trading system to maximize adaptation and teaming by doing effect in the industrial sector.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.4
• /
• pp.323-329
• /
• 2017

Nowadays, considering global warming and enhanced prohibition to discharge pollutants at sea, all of existing operation-ships must lead to the reduction of fuel consumption. International standards of International Maritime Organization and EU rules governing harbor pollutants are being strengthened. Therefore, ship-owners and operators are seeking ways to reduce $CO_2$, SOx, and NOx emissions. Although world trade continues to expand, total fuel usage for sea transport tends to diminish. However, ICS(International Chamber of Shipping) has set a goal of reducing $CO_2$ emissions from shipping by 50% until 2050. In addition, with respect to the Paris Climate Change Accord in 2015, IMO proposes to set up a reduction target of GHG emission from existing operation-ships. For setting up a reduction target of GHG from international maritime transport, "A data collection system for fuel consumption" will be introduced in the near future. In order to effectively reduce the use of fuel in a ship in accordance with the trend of compulsory fuel saving from operation ships, this paper suggested adoption of an Incentive-Penalty scheme based on Emission-Trading-Scheme, Carbon Tax, and basic calculation formula after verifying the EEOI level for a year.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.3
• /
• pp.136-142
• /
• 2000

With the significant growth of the number of vehicles environmental problems is raised. NOx SOx, and PM emissions in diesel powered vehicles are larger than that in gasoline because the development of pollutants reduction techniques has not been yet achieved. So it is need to develop after-tratment or to convert into alternative fuel to satisfy emission regula-tion. Among the after-treatment systems to reduce the diesel emissions studies with diesel oxidation catalyst(DOC) are done greatly. In this study using DOC reduction efficiency with the change of temperature and catalyst loading was calculated through measurements of CO, HC, PM. and SOX.

• Environmental and Resource Economics Review
• /
• v.26 no.1
• /
• pp.57-83
• /
• 2017

The Japanese government's attempts to reduce fine particles (PM2.5) emission pollution in Japan have been largely ineffective. This is because PM2.5 in Japan originated from various sources including around half from oversea countries such as China. This prompts the Japanese government to start a new initiative to reduce PM2.5 at its origin by transferring local knowledge on air pollution reduction measures and technologies to China and working closely with the Chinese government. To promote further reduction in PM2.5, bilateral corporation between Japan and China should be extended to include Korea. It is recommended that an international convention should be in place to deal with transboundary air pollutants in East Asia. A successful East Asia corporation to reduce PM2.5 will not only contribute to clean air but also to future sustainable low carbon society in this region.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.6
• /
• pp.656-665
• /
• 2012

Recently, yearly production of SRF (Solid Recovered Fuel) as an alternative fuel has been rapidly increasing because of the limited waste disposal, rise in oil prices and reduction of greenhouse gas emission. However, SRF using facilities are excluded from the National Air Pollutant Emission Estimation because SRF using facilities are not yet included among the SCC (Source Classification Code). The purpose of this research was to estimate the emission and emission factor of SRF using facilities' PM and $NO_x$, in order to investigate whether or not they are included in the National Air Pollutant Emission Estimation. The emission factors of SRF using facilities' PM and $NO_x$ are calculated as 0.216 kg/ton, and 3.970 kg/ton, and the emission was estimated based on the yearly total SRF usage of 2011. The results above was 18.7% for PM and 12.8% for $NO_x$ emissions from combustion facility (SCC2) in manufacturing industry combustion (SCC1) of CAPSS. If CAPSS estimate the emission by adding SCC on unlisted SRF in case of Boiler (SCC3) fuel, both PM and $NO_x$'s emissions would increase by 15.8% and 11.3% compare to the emissions for the existing combustion facility. As a result, emissions caused by SRF should be considered when calculating the National Air Pollutant Emission Estimation. In addition, further researches to develop emission factor and improve subdivided SCC should be done in the future, for the accurate and reliable estimation of National Emission.

• Journal of ILASS-Korea
• /
• v.29 no.2
• /
• pp.68-74
• /
• 2024

As awareness of environmental pollution problems increases worldwide, interest in air pollutants is increasing. In particular, NOx and PM, which are major pollutants in diesel vehicles, are contributing significantly to emissions. As a result, its importance is increasing. In this study, based on research results applied to large diesel vehicles, the problem of natural regeneration caused by low exhaust gas temperature during low speed and low load operation is solved by applying a complex regeneration DPF that is not affected by temperature conditions to small diesel vehicles. The feasibility of application to small diesel vehicles was reviewed by measuring the emission reduction efficiency. As a result of the engine test, the power reduction rate and fuel consumption rate before and after device installation under full load conditions were 2.9% decrease and 3.5% increase, respectively, satisfying the standard for a 5% reduction, and as a result of the regeneration equilibrium temperature (BPT) test, the regeneration temperature was 310℃. appeared at the level. The reduction efficiency test results for the actual vehicle durability test equipment showed 97.3% PM, 51.0% CO, and 31.1% HC, while the city commuter vehicle had PM 97.5%, CO 61.7%, HC 40.0%, and the school bus vehicle had PM 96.8%, CO 44.4%, HC 34.3%, and low-speed logistics vehicles showed a reduction efficiency of 98.2% for PM, 36.0% for CO, and 45.7% for HC. Based on the results of this study, in the future, it is necessary to secure DPF technology suitable for all vehicle types through actual vehicle application research on temperature condition-insensitive composite regenerative DPF for medium-sized vehicles.