• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.7
• /
• pp.514-523
• /
• 1987

Pole assignment adaptive controller has been suggested for automatic regulation of blood pressure by means of hypertinsive of hypotensive drugs. The relationship between the drug infusion rate and the blood pressure was described by an ARMA model. This adaptive algorithm does not reguire preliminary tests for the purpose of tuning the parameters, and have the capability to adjust automatically to changes in the curculatory state of subject. Experimental results on rabbits showed that stable control are occurred during operation. On the basis of theoretical considerations and experimental results, we expected that adaptive drug infusion system using pole assignment procedure might be effectively applied to the blood pressure control in clinical application.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.815-817
• /
• 1999

In the two-mass system driving a load through a flexible shaft or transmission system, a shaft torsional vibration is often generated. In this case, it's difficult to control only by conventional PI controller. To solve this problem. the two-mass speed control system with PID controller is designed by using pole assignment method, and an optimum PID parameters are derived by evaluating ITAE(Integral of time multiplied by the absolute error) performance index. Simulation results show the validity of the proposed PID controller and this controller is compared with the conventional PID controller.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.862-864
• /
• 1999

Adaptive Fuzzy control system is very powerful in nonlinear system, but That system require exactly membership function and parameter. If the membership function and parameter are not exact, the system will generate chattering. Using the Pole assignment compensator can remove the chattering and steepest descent method can reduce the convergence time. In this Paper, this algorithm applicate to the Inverted pendulum, so save proof of algorithm that is to be vigorous.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.20-22
• /
• 2005

In this paper, we propose a novel stability criterion for switched linear systems. The proposed method employs the results on the upper bound of the solution of LME(Lyapunov Matrix Equation) and on the stability of hybrid system. The former guarantees the existence of Lyapunov-like energy functions and the latter shows that the stability of switched linear systems by using these energy functions. The proposed criterion releases the restriction on the stability of switched linear systems comparing with the existing methods and provides us with easy implementation way for pole assignment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.248-253
• /
• 1992

In the development of a high speed and light weight manipulator, it is necessary to consider the structural elasticity of a robotic arm. The analysis of the infinite mode dynamic of robotic arm must be performed to obtain the finite mode modelling to achieve the feasible controller design of the robotic arm. The modelling procedure of the robotic arm is also illustrated. The controlled mode of the modelled dynamic can be derived by truncating the higher vibrational mode to result in the low order system for the sampling in the control signal is confined to the higher mode. And it is controlled by the pole assignment which can compensate the unmodelled dynamic effects. The unmodelled dynamic can result in the instability of the controlled system, which is known as spillover. The controller design of the low order system is simulated by the pole assignment and optimal control theory.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.6
• /
• pp.707-712
• /
• 1998

본 논문에서는 선형 시불변 시스템에 대해 상태되먹임을 이용한 폐루프계의 지정된 영역내의 극배치법을 제안한다. 본 제안된 기법은 해밀톤 행렬의 하중행렬 Q의 설정에 의해 지정된 영역 (α중심, γ반경)내에 극배치가 가능함을 보인다. 먼저, Gershgorin의 이론을 적용하기 위해 해밀톤 행렬을 등가 변환시킨 후 행렬의 각 계수를 α와 γ의 관계를 이용하여 유도한다. 위의 관계를 만족하는 해밀톤 행렬의 각 하중행렬과 변환행렬을 이용하여 폐루프계의 상태되먹임 제어칙을 구한다. 또한 본 기법은 해밀톤 행렬과 최적제어와의 관계를 지니고 있으므로 얻어진 폐루프계는 최적제어법에서와 동일한 강인함을 가지게 된다. 끝으로 예제를 통하여 지정된 영역내의 극배치가 이루어짐을 보인다.

• Transactions on Control, Automation and Systems Engineering
• /
• v.2 no.2
• /
• pp.116-120
• /
• 2000

This paper presents a method to assign robustly the closed loop system's poles in a specified disk by a state feedback for a linear time invariant system with structured or unstructured uncertainties. THe proposed robust design procedure includes two steps. Firstly, the perturbed closed loop matrix $A_{cl p}$ = $A_{cl}$ + Δ$A_{cl}$ is rearranged such that it is a function of the nominal closed loop matrix $A_{cl}$. Hence, we can control the positions of the perturbed closed loop poles by choosing $A_{cl}$ appropriately. Secondly, the feedback control law F that assigns the closed loop poles of the perturbed system in a specified disk is determined from the equation $A_{cl}$ = A + BF. A procedure for finding F is proposed based on partitioning every matrix of the equation $A_{cl}$ = A + BF in the horizontal direction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.8
• /
• pp.659-666
• /
• 1990

Curing recent years, several state-space models describing discrete two dimensional systems are proposed. In this paper, we consider the problem of pole assignment of two dimensional systems using state feedback, based on state-space model proposed by Roessser. The design procedure is seperated into two steps. in thie first step, the sufficient condition for off diagonal matrix of the input transformed system to be zero is derived and in the second step, it is shown that the pole assignment problem of two dimensional systems is divided into the one of two 1-dimensional systems. Finally, a numerical example for illustrating the technique is given.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.11a
• /
• pp.690-694
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes, a feedrate override Adaptive Control Constant system was developed. This paper presents an explicit pole-assignment PI-control law through spindle motor current monitoring and its application to cutting force regulation for feedrate optimization. An experimental set-up is constructed for the commercial CNC machining center without any major changes of the structure. A data transfer system is constructed with standard interface between an IBM compatible PC and a CNC of the machining center. Experimental results show the validity of the system.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.76-78
• /
• 1987

This paper describes the theory and application of a multi-input/multi-output self-tuning regulator where the control objective is the assignment of the closed-loop pole set to prespecified locations. The algorithm described In this paper has a 'self-tuning' property. This self-tuners are more robust than the tuners that are based on optimal control synthesis method. This paper demonstrate usefulness of the algorithms by means of some simulation studies.