• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.148-150
• /
• 1987

In this paper, the pole assignment control algorithm with a discrete integral action is discussed in that it reduces the impact of an external step disturbance upon the output. The sensitivity of output is viewed according to changes of delay-time which this algorithm is applied to a continuous plant with.

• Journal of Institute of Control, Robotics and Systems
• /
• v.2 no.4
• /
• pp.306-311
• /
• 1996

This paper discusses the maintenance of the water level of steam generators at its programmed value. The process, the water level of a steam generator, has the nonminimum phase property. So, it causes a reverse dynamics called a swell and shrink phenomenon. This phenomenon is severe in a low power condition below 15 %, in turn makes the start-up of the power plant too difficult. The control algorithm used here incorporates a pole-assignment scheme into the minimum variance strategy and we use a parallel adaptation algorithm for the parameter estimation, which is robust to noises. As a result, the total control system can keep the water level constant during full power by locating closed-loop poles appropriately, although the process has the characteristics of high complexity and nonlinearity. Also, the extra perturbation signals are added to the input signal such that the control system guarantee persistently exciting. In order to confirm the control performance of a proposed pole-assignment self-tuning controller we perform a computer simulation in full power range.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10a
• /
• pp.435-438
• /
• 1990

A new robust stabilizing method of uncertain system is proposed. The model uncertainty is considered to be the system matrix perturbations. The region of perturbed system eigenvalues are estimated by union of the disks which have the constant radius. Full state feedback control matrix which satisfies the new stabilization condition can be obtained by weighted LQ regulator or pole assignment technique.

• Journal of Industrial Technology
• /
• v.11
• /
• pp.27-31
• /
• 1991

Consider a problem to keep half of the poles unchanged when some of the coefficients of stable characteristic polynomials are perturbed. A procedure was proposed for the problem. However, the pole assignment procedure has not been addressed. A simple algorithm for the procedure is proposed in this paper.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.920-925
• /
• 1993

For a multi-input, multi-output system, it is widely known that feedback control gain presents extra freedom pole placement problem. An eigenstructure assignment utilizes this freedom for assignment of all or some elements of the closed-loop eigenvectors. In this paper, a nonlinear optimization technique is adopted to obtain a small gain controller that assigns closed-loop eigenvalues and elements of eigenvectors simultaneously. To illustrate the approach, a numerical example of the Airplane mode decoupling using an advanced fighter is shown.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.146-150
• /
• 1989

In the pole assignment strategy, the closed loop poles are placed at prespecified locations. The amount of control effort required is to some extent proportional to the distance of the proposed closed loop locations of the poles from their open loop locations. The poor choice of closed loop locations may result in Large control effort and it may nuke the system unstable. To overcome this problem, pole shift control strategy is described in this paper. The validity of the proposed control strategy is assured through some simulations.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.36-44
• /
• 1993

In the development of a high speed and light weight manipulator, it is necessary to consider the flexibility of a robotic arm. The infinite dynamics must be analyzed to obtain the finite mode modeling to achieve the feasible controller design of the robotic arm. The modeling procedures of the flexible robot arm, and natural frequencies and mode shapes by the constrained and unconstrained mode method are illustrated. The transfer function of the robot arm with a payload is also shown. The controller is designed by the pole assignment and optimal control theory to compensate for the unmodelled dynamic effects to the low order system. Also, the pole assignment method involving the harmonic vibration mode is presented through computer simulation.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.139-141
• /
• 2008

This paper presents a PID controller and PI-PI dual loop controller for a single-phase inverter. The control parameters of conventional controllers are very difficult to make. But parameters of controllers based on pole-assignment are easy to make. Simulation results are presented for the system under R-L load, no load and change reference voltage.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.3
• /
• pp.290-298
• /
• 1991

In the paper, the bilinear transformation method is applied to the design of servo system adopting the use of the internal model principle and the pole assignment method in a specified region. The pole assignment problem for the augmented system has been solved by using Tustin's function. The properties of Tustin's function have been shown in relation to the s-plane and z-planes, and the feedback law relationship between the original system and the transformed system has been cleared. The effectiveness of the proposed approach is proved via application for the cart system and the designed cart system is implemented by digital control with microcomputer and A-D/D-A converter.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.34 no.2
• /
• pp.63-71
• /
• 1985

The existing methods of pole assignment were reserved in this paper, a digital control method for MIMO dynamic systems was developed based on pole assignment using I/O delay. The underlined concept of the derived control law was that the poles corresponding to the order of a system can be assigned on the desired positions via output delay, and the poles of the order incrememted by output delay were forced to be placed on zero positions by way of input delay when applied to an actual MIMO system, the present scheme was shown to be more effective than the conventional state feedback scheme with observer in that the former was simpler than the latter, while they performed well.