• Journal of fish pathology
• /
• v.16 no.2
• /
• pp.131-134
• /
• 2003

The change of membrane fluidity in rockfish (Sebastes schlegeli) phagocytes during respiratory burst was investigated. Fluorescence polarization (FP) was used as a measure of membrane fluidity, and 1-(4-trimethylaminophenyl)-6-phenyl-1 .3 ,5-hexatriene (TMA.-DPH) was used us a fluorescent probe. The significantly higher FP values in phagocytes stimulated With zymosan or phurbol myristate acetate (PMA) than unstimulated control phagocytes suggests that membrane fluidity of phagocytcs is decreased during the respiratory burst. The faster decrease of FP value in PMA stimulated phagocytes than in zymosan sumulated phagocytes may be due to bypass of the receptor-mediated stages of functional modulation. which is needed in zymosan stimulated phagocytes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.2
• /
• pp.151-157
• /
• 2000

The ITU-R model for cross-polarization, which is accurate enough in real rainfall environments, is proposed in this paper. By comparing this with measurement data and the ITU-R model, we have also derived a prediction model for rain cross-polarization applicable upto millimeter wave band.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.55-61
• /
• 2000

The ITU-R model for cross-polarization due to rain is applicable only upto 3.5GHz. The scattering characteristics of rain drops are analyzed by an analytical model. A simple theoretical model for croee-polarization, which is accurate enough in real rainfall environments. is Proposed in this Paper. By comparing this with measurement data and the ITU-R, we have also derived an prediction model for rain cross-polarization applicable upto millimeter wave band.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.87-90
• /
• 1999

The dependence of diffraction efficiency as a funct~on of film thickness and incident angle has been investigated in amorphous chalcogenide thin films, which act as a polarization holographic materials. Especially a-(Se, S) based films exhibit a number of photoinduced phenomena not observed in other types of amorphous thin films. Holographic gratings in amorphous As-Ge-Se-S thin films have been formed using the mutual perpendicular polarized(linearly) He-Ne laser light. We could obtain the optimum condition to get high diffraction efficiency.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.150-152
• /
• 2002

This paper, experiment manufactures device of Metal/Poly-$\gamma-Benzyl\;_D-Glutamate$ Organic Films/Metal structure using PBDG and I-V properties and C-F properties. The I-V characteristic is measured that approve voltage from 0 to +2[V] of device and the distance between electrode is larger, could know that small current flow and thin film could know that had insulation property. C-F characteristic has each other affinity between the polarization amount and frequency. Dielectric constant of MIM device could know by dipole that is voluntary polarization of LB film that polarization is happened. The capacitor properties of a thin film is better as the distance between electrodes is smaller.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.160-166
• /
• 2019

A novel analytical method based on the cavity mode theory to design a metasurface (MS) is proposed in this study. We carefully analyzed the phase and amplitude characteristics of the incident wave and transmitted wave, and successfully designed a circular polarization conversion MS by introducing a cutting structure with wider operation bandwidth and higher radiation direction gain compared with that of the original MS. For the measurements, a microstrip antenna operating at 2.4 GHz was used as the source antenna to verify the designed MS. The simulation and measurement results agree well with each other.

• Transactions of Materials Processing
• /
• v.28 no.2
• /
• pp.77-82
• /
• 2019

Corrosion occurs well on surface of roll formed and Zn alloy subsequently electro-deposited on steel bolt under wet condition. In this study, variations in corrosion resistance were investigated through the measurement of polarization curves on steel bolts which were roll formed and subsequently coated with various types of coating methods. According to the measured polarization curve, Ni-P electroless deposits on roll formed steel increased the resistance to corrosion. The corrosion resistance of Zn alloy powder coated steel bolt was found to be better than that of Zn-Ni electro-deposited sample.

• Korean Journal of Optics and Photonics
• /
• v.32 no.1
• /
• pp.29-33
• /
• 2021

We have experimentally simulated the violation of the Leggett-Garg inequality (LGI) using a heralded-single-photon source via spontaneous parametric down-conversion (SPDC) in a periodically poled potassium titanyl phosphate (PPKTP) crystal. We measured the polarization fringe as a function of the angle of the linear polarization of the photons, and analyzed the LGI according to n measurement. Simulation results for LGI based on the polarization of the heralded single photon were in good agreement with theoretical calculations.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.483-494
• /
• 2023

Measurement of the physical properties of rocks or minerals is an important factor in determining the distribution of the underground medium as well as mineral resource investigations. Resistivity and induced polarization, which are widely used in Korea, are methods for measuring electrical properties, which are representative properties of obtaining subsurface information. In order to precisely analyze the exploration data obtained from various sites, it is important to accurately measure the material properties. Electrical properties of rock is measured using two-electrode or four-electrode method. Compared to the four-electrode method, the two-electrode method is generally used because it is very easy to contact the sample and the electrode, but there is a problem in that the impedance of the electrode and the sample is measured together. In this study, the time-domain the induced polarization effects were measured using the 2-electrode method and the 4-electrode method for artificial samples mixed with graphite and cement having induced polarization characteristics, and the results were compared. Although the 4-electrode method has difficulties in installing potential electrodes, it was confirmed that it is effective in measuring electrical properties because it can reduce the problem caused by the impedance of potential electrodes compared to the 2-electrode method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.1
• /
• pp.13-22
• /
• 2022

In this paper, we propose single and array antenna with dual linear polarization characteristics for 28 GHz band. The proposed antenna is designed two microstirp feeding structure and Taconic TLY-5 substrate, which is thickness 0.5 mm, and the dielectric constant is 2.2. The size of single patch antenna is 3.4 mm×3.4 mm, and total size of single antenna is 15.11 mm×15.11 mm. Also, the size of array antenna is 3.15 mm×3.15 mm, and total size of array antenna is 21.5 mm×13.97 mm. From the fabrication and measurement results, for 1×2 array antenna, in case of vertical polarization, cross polarization ratios are obtained from 14.23 dB to 20.79 dB and in case of horizontal polarization, cross polarization ratios are obtained from 14.31 dB to 22.74 dB for input port 1. in case of vertical polarization, cross polarization ratios are obtained from 15.75 dB to 25.88 dB and in case of horizontal polarization, cross polarization ratios are obtained from 14.70 dB to 22.82 dB for input port 2.