• 제목/요약/키워드: Polarity value

검색결과 107건 처리시간 0.029초

고압전동기 고정자 권선의 PRPD 부분방전 결함신호 해석 (Analysis on Partial Discharge Fault Signals of PRPD for High Voltage Motor Stator Winding)

  • 박재준;이성룡;문대철
    • 한국전기전자재료학회논문지
    • /
    • 제19권10호
    • /
    • pp.942-946
    • /
    • 2006
  • We simulated insulation defects of stator winding wire on high voltage generator by 5 types. 4 types have one discharge source and other one has multi discharge source by simulation. For accurate decision, measurements used to PRPD pattern to occurred partial discharge source of various types. In this research, when PRPD pattern carried out or analyzed pattern recognition of discharge source, it used to powerful tools. In this result, PRPD Pattern defined to have single discharge source of 4 types by insulation defect. When insulation defect simulated, all the defected winding have not the same result. Errors for a little different can make mistakes from a subtle distinction. The difference between internal and void discharge have magnitude of pulse amplitude of inner discharge bigger than void discharge and have a shape of bisymmetry. But void discharge has a shape of bisymmetry against maximum value on polarity respectively. In cases of slot and surface discharge, we confirmed to show similar results those other researchers. In case of multi-discharge, as a result of we could classify not perfect match with occurred patterns in single discharge eachother. In the future, we will have to recognize and classify with results of multi-discharge.

자속구속형 초전도 전류제한기의 용량증대를 위한 동작특성 (Operating Characteristics of Capacity Increase in a Flux-Lock Type Superconducting Fault Current Limiter)

  • 남긍현;최효상;박형민;조용선;이나영;한태희
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.200-202
    • /
    • 2006
  • We investigated the operating characteristics of a flux-lock type superconducting fault current limiters according to the number of the serial connection each the superconducting element at the additive polarity winding of a transformer. This SFCL consists of two coils wound in parallel on the same iron core, and the secondary coil is connected to the elements in series. Operating characteristics can be controlled by adjusting the inductances and the winding directions of the coils. It turns ratio between the primary and the secondary coils is 63:21. The analysis of voltage, current, and resistance in serial connection each element was performed to increase the applied voltage of flux-lock type SFCL. When the applied voltage was 200/$\sqrt{3}[V_{rms}]$ with three elements connected in seres, the peak value of the line current increased up to 26,24[A]. On the other hands, resistive SFCL increased up to 36.35[A], under the same conditions. This enabled the flux-lock type SFCL to be easy to increase the capacity of power system.

  • PDF

고양강 추출물의 암예방 활성 (Cancer Chemopreventive Activity of the Rhizome Extract of Alpinia officinarum)

  • 구강모;장영진;김민근;김길웅;송경식;강영화
    • 생약학회지
    • /
    • 제38권1호
    • /
    • pp.95-99
    • /
    • 2007
  • In order to find novel cancer chemopreventive agents, quinone reductase (QR) inductive activity of methanol extract of herbal medicines was examined using murine hepatoma, hepa1c1c7 cells. QR has been used as an anticarcinogenic marker enzyme in cancer chemoprevention study. The methanol extract of Alpinia officinarum (Zingiberace) showed showed significantly strong quinone reductase inductive activity compared to the control group. The methanol extract of Alpinia officinarum was successively fractionated with various solvents according to polarity. Hexane, ethyl acetate, buthanol and water fractions were obtained and theirs activities were assessed. The QR inductive effect was moved to the ethyl acetate fraction and was highly increased. The CD (concentration required to double the specific activity of QR) value of ethyl acetate fraction was 8.6 ${\mu}g/mL$. Alpinia officinarum also showed strong antioxidant activity. These results suggest that Alpinia officinarum can be developed as cancer chemopreventive agent.

추출용매에 따른 이슬송이버섯(Lentinula edodes GNA01) 추출물의 항산화 활성 (Effect of Extraction Solvent on the Antioxidant Activity of Lentinula edodes GNA01 Extract)

  • 장혜림;박서연;남진식
    • 한국식품영양학회지
    • /
    • 제30권1호
    • /
    • pp.51-58
    • /
    • 2017
  • Antioxidant activities of 80% methanol, water, and 70% ethanol extracts of Lentinula edodes GNA01 were compared and estimated. The yield of Lentinula edodes GNA01 was identified to be in the following order: water>70% ethanol>80% methanol, but there was no significant difference between 80% methanol and 70% ethanol extracts. The highest total phenolic content (TPC) and total flavonoid content (TFC) were found in water extract, and TPC of 80% methanol extract was higher than that of 70% ethanol extract and TFC of 70% ethanol extract was higher than that of 80% methanol extract. Water extract exhibited the strongest DPPH, ABTS radicals, and nitrite scavenging activities, $Fe^{2+}$ chelating ability, and FRAP among the three extracts. In addition, antioxidant activity of 80% methanol extract was higher than that of 70% ethanol extract in most of the experiments. As a result, antioxidant activity of Lentinula edodes GNA01 showed a difference according to extraction solvent and concentration; nevertheless, water extract exhibiting high polarity had the strongest antioxidant effect. Consequently, water extract from Lentinula edodes GNA01 is anticipated to be useful for the development of a high value-added functional product.

Design And Implementation of a Novel Sustain Driver for Plasma Display Panel

  • Agarwal Pankaj;Kim Woo-Sup;Cho Bo-Hyung
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2006년도 전력전자학술대회 논문집
    • /
    • pp.403-405
    • /
    • 2006
  • Over the years, plasma display panel (PDP) manufacturers have impressed the flat panel display industry with yet another new product essentially having the merits of a larger screen size. Since larger size implies higher power ratings, voltage/current ratings of the power devices used have become a rising concern. Another important concern is the brightness of PDP, one way of increasing which is by operating the PDP at higher frequencies. In order to address the above issues, a transformer coupled sustain-driver for AC-PDP is proposed During the transition time, the two windings of the transformer greatly boost up the displacement current flowing through the panel capacitance and hence enable a fast inversion of the voltage polarity with practical values of resonant inductance. In the proposed topology, the resonant inductance can be increased by a factor of $(n+1)^2$ as compared to prior approaches. Increased inductance results in lower current stresses. Moreover, high frequency operation is possible by using higher value of n (turn ratio of the transformer). The operational principle and design procedure of the proposed circuit are presented with theoretical analysis. The validity of the proposed sustain driver is established through simulation and experimental results using a 42-in PDP

  • PDF

초음파 진동 부가에 의한 세라믹 복합체의 형조방전가공 (Die-sinking Electrical Discharge Machining with Ultrasonic Emission for Ceramic Matrix Composite)

  • 왕덕현;우정윤;윤존도
    • 한국정밀공학회지
    • /
    • 제16권8호
    • /
    • pp.9-15
    • /
    • 1999
  • Die-sinking electrical discharge machining(EDM) for conductive ceramic matrix composite(CMC) of Tic/$Al_2O_3$ was experienced with addition of ultrasonic emission, and the results were compared with ones obtained by the EDM only. From this experimental study, the values of material removal rate(MRR) and surface roughness($R_{max}$), scanning electron microscope(SEM) micrographs, and weibull probability distribution of bending strength for the specimens were obtained and compared. The trend of MRR was found to be increased slightly with the current and the duty factor for both EDM only and EDM with ultrasonic emission. The MRR values were found to be increased for EDM with ultrasonic emission. The SEM micrographs of EDMed surface by under various operating conditions showed less micro cracks in various places. Although smaller bending strength value was obtained by EDMed surface with ultrasonic emission by weibull probability distribution analysis of bending strength.

  • PDF

Anti-proliferative and Anti-telomerase Activity of Curcuma Rhizome Extract on Oral Squamous Cell Carcinoma and Osteosarcoma Cells

  • Kim, Kyung-Jin;Kim, Jeong-Hee
    • International Journal of Oral Biology
    • /
    • 제32권4호
    • /
    • pp.135-141
    • /
    • 2007
  • Anti-proliferation of methanol extract of Curcuma rhizome on oral squamous cell carcinoma (KB) and osteosarcoma (HOS) cells were investigated. In order to elucidate the involvement of telomerase inhibitory activity as a part of anti-proliferative effect of Curcuma rhizome on cancer cells, we measured telomerase activity in Curcuma rhizome extract-treated cancer cells. The concentration inhibited cell proliferation to 50% $(IC_{50})$ of the methanol extract of Curcuma rhizome against oral squamous cell carcinoma (KB) cells and osteosarcoma (HOS) cells were 21.30 ${\mu}g/ml$ and 39.3${\mu}g/ml$, respectively. The methanol extract of Curcuma rhizome showed inhibitory telomerase inhibitory effect which is required for cancer cell immortality. Therefore, it seems that the anticancer effect of methanol extract of Curcuma rhizome is at least partially due to telomerase inhibitory effect. Five fraction samples were prepared according to its polarity differences and analyzed anti-proliferative effects of each fraction samples on oral squamous cell carcinoma and osteosarcoma cells. Anticancer effect was observed in dichloromethane, and ethylacetate fractions. The highest anticancer effect was found in dichloromethane fraction which had $IC_{50}$ value of 23.3 ${\mu}g/ml$ and 10.5${\mu}g/ml$ against oral squamous cell carcinoma (KB) cells and osteosarcoma (HOS) cells, respectively.

Statistical Analysis of Supersonic Downflows in Sunspot Penumbrae

  • Kim, Hyunnam;Solanki, Sami K.;Lagg, Andreas;Kim, Kap-Sung
    • 천문학회보
    • /
    • 제39권1호
    • /
    • pp.75.1-75.1
    • /
    • 2014
  • Sunspot penumbrae show supersonic downflow patches along the periphery. These patches are believed to be the return channels of the Evershed flow. There was previous study to investigate their structure in detail using Hinode SOT/SP observations (M. van Noort et al. 2013) but their data sample was only two sunspots. To make general description it needs to check more sunspot sample. We selected 242 downflow patches of 17 sunspots using Hinode SOT/SP observations from 2006 to 2012. Height-dependent maps of atmospheric parameters of these downflows was produced by using HeLix which was height dependent LTE inversion code of Stokes profiles. The inversion code at high resolution allows for the accurate determination of small scale structures. The recovered atmospheric structure of three layers indicates that regions with very high downflow velocities contain very strong magnetic fields reaching up to 7kG. The higher downflow velocity patches have bigger patch size. Magnetic fields of downflow patches are more vertical while penumbra shows horizontal field and neighbor of downflow patches have opposite polarity. Temperature of downflow patches at highest layer have more strong value than penumbra at deepest layer. The direction of velocity of downflow patches at highest layer have two branches. These result shows that we can expect some heating precess in the middle of layer.

  • PDF

다극착자기에서 착자전류가 잔류자속밀도에 미치는 영향 (Effects of Magnetizing Currents on Remanent Flux Density in Multipole Magnetizer)

  • 박관수;이향범;배동진;한송엽;최홍순;홍정표;주관정
    • 한국자기학회지
    • /
    • 제2권2호
    • /
    • pp.145-149
    • /
    • 1992
  • 영구자석의 착자상태는 영구자석이 사용된 기기의 특성에 큰 영향을 미친다. 따라서 영구 자석기기에서 원하는 특성을 얻기 위해서는 영구자석의 착자상태를 정밀하게 해석할 필요가 있다. 본 논문에서는 비선형과 이방성 특성이 고려된 유한요소법으로 착자기를 해석하였다. 착자전류가 변함에 따른 자화량의 분포와 그 자화량에 의하여 공극에 발생되는 저장의 값을 각도가 서로 다른 2가지 착 자요크에 대하여 구한 결과, 착자요크의 형상에 따라 과도한 착자전류는 자화량의 분포를 왜곡시키고, 이에따라 발생되는 공극에서의 자장의 값은 오히려 줄어듦을 알 수 있었다. 따라서 영구자석을 자화 시키기 위한 착자기를 설계할때 원하는 착자분포를 얻기위해서는, 착자요크의 각도에 따라 적절한 착 자전류의 값이 있음을 알 수 있다.

  • PDF

오피니언 마이닝을 이용한 지능형 VOC 분석시스템 (Intelligent VOC Analyzing System Using Opinion Mining)

  • 김유신;정승렬
    • 지능정보연구
    • /
    • 제19권3호
    • /
    • pp.113-125
    • /
    • 2013
  • 기업 경영에 있어서 고객의 소리(VOC)는 고객 만족도 향상 및 기업의사결정에 매우 중요한 정보이다. 이는 비단 기업뿐만 아니라 대고객, 대민원 업무를 처리하는 모든 조직에 있어서도 동일하다. 때문에 최근에는 기업뿐만 아니라 공공, 의료, 금융, 교육기관 등 거의 모든 조직이 VOC를 수집하여 활용하고 있다. 이러한 VOC는 방문, 전화, 우편, 인터넷게시판, SNS 등 다양한 채널을 통해 전달되지만, 막상 이를 제대로 활용하기는 쉽지 않다. 왜냐하면, 고객이 매우 감정적인 상태에서 고객의 주관적 의사를 음성 또는 문자로 표출하기 때문에 그 형식이나 내용이 정형화되어 있지 않고 저장하기도 어려우며 또한 저장하더라도 매우 방대한 분량의 비정형 데이터로 남기 때문이다. 본 연구는 이러한 비정형 VOC 데이터를 자동으로 분류하고 VOC의 유형과 극성을 판별할 수 있는 오피니언 마이닝 기반의 지능형 VOC 분석 시스템을 제안하였다. 또한 VOC 오피니언 분석의 기준이 되는 주제지향 감성사전 개발 프로세스와 각 단계를 구체적으로 제시하였다. 그리고 본 연구에서 제시한 시스템의 효용성을 검증하기 위하여 의료기관 홈페이지에서 수집한 4,300여건의 VOC 데이터를 이용하여 병원에 특화된 감성어휘와 감성극성값을 도출하여 감성사전을 구축하고 이를 통해 구현된 VOC분류 모형의 정확도를 비교하는 실험을 수행하였다. 그 결과 "칭찬, 친절함, 감사, 무사히, 잘해, 감동, 미소" 등의 어휘는 매우 높은 긍정 오피니언 값을 가지며, "퉁명, 뭡니까, 말하더군요, 무시하는" 등의 어휘들은 강한 부정의 극성값을 가지고 있음을 확인하였다. 또한 VOC의 오피니언 분류 임계값이 -0.50일 때 가장 높은 분류 예측정확도 77.8%를 검증함으로써 오피니언 마이닝 기반의 지능형 VOC 분석시스템의 유효성을 확인하였다. 그러므로 지능형 VOC 분석시스템을 통해 VOC의 실시간 자동 분류 및 대응 우선순위를 도출하여 고객 민원에 대해 신속히 대응한다면, VOC 전담 인력을 효율적으로 운용하면서도 고객 불만을 초기에 해소할 수 있는 긍정적 효과를 기대해 볼 수 있을 것이다. 또한 VOC 텍스트를 분석하고 활용할 수 있는 오피니언 마이닝 모형이라는 새로운 시도를 통해 향후 다양한 분석과 실용 프레임워크의 기틀을 제공할 수 있을 것으로 기대된다.