• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2001.04a
• /
• pp.110-118
• /
• 2001

In many areas of finite element analysis, elements with special properties are required to achieve maximal accuracy. As examples, we may mention infinite elements for the representation of spatial domain that extend to special and singular elements for modeling point and line singularities engendered by geomeric features such as reentrant corners and cracks. In this paper, we study on modified shape function representing singular properties and algorigthm for the pollution adaptive mesh generation. We will also show that the modified shape function reduces pollution error and local error.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.254-259
• /
• 2008

Mesh WLANs, which consist of wireless mesh routers connecting each other in a mesh topology and self-operate after their autoconfiguration, have several advantages in convenience, swiftness and flexibility of deployment and operation over existing WLANs the expansions of which are done by connecting the APs with wires. However, many technical issues still remain to be solved. Among them, network performance degradations due to the interference between the adjacent hops in multi-hop mesh WLANs, and the reusability of the existing wireless network protocols are critical problems to be answered. This work evaluates the VoIP support performance of IEEE 802.11a/g-based mesh WLANs with multiple wireless interfaces with simulations. The results show that there exit an unfairness in VoIP packet delay performances among mobile routers located at different hops, and that although the capacity of the admitted calls can be increased by increasing the size of voice packet payload it is far less than the expected one. This suggests that the existing 802.11 MAC protocols have their limitation when applied in mesh networks and their enhancement or even a newer one nay be required.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.772-784
• /
• 2024

The hexagonal nodal code RENUS has been enhanced to handle irregularly deformed hexagonal assemblies. The underlying RENUS methods involving triangle-based polynomial expansion nodal (T-PEN) and corner point balance (CPB) were extended in a way to use line and surface integrals of polynomials in a deformed hexagonal geometry. The nodal calculation is accelerated by the coarse mesh finite difference (CMFD) formulation extended to unstructured geometry. The accuracy of the unstructured nodal solution was evaluated for a group of 2D SFR core problems in which the assembly corner points are arbitrarily displaced. The RENUS results for the change in nuclear characteristics resulting from fuel deformation were compared with those of the reference McCARD Monte Carlo code. It turned out that the two solutions agree within 18 pcm in reactivity change and 0.46% in assembly power distribution change. These results demonstrate that the proposed unstructured nodal method can accurately model heterogeneous thermal expansion in hexagonal fueled cores.

• Journal of KIISE:Software and Applications
• /
• v.32 no.3
• /
• pp.173-180
• /
• 2005

This paper proposes an effective algorithm that combines both the stereo matching and the marching cube algorithm. By applying the stereo matching technique to an image obtained from various angles, 3D geometry data are acquired, and using the camera extrinsic parameter, the images are combined. After reconstructing the combined data into mesh using the image index, the normal vector equivalent to each point is obtained and the mesh smoothing is processed. This paper describes the successive processes and techniques on the 3D mesh reconstruction, and by proposing the intermediate iso- surface algorithm. Therefore it improves the 3D data instability problem caused when using the conventional marching cube algorithm.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.224-230
• /
• 2015

This manuscript presents a real-time solution for 3D human body reconstruction with multiple RGB-D cameras. The proposed system uses four consumer RGB/Depth (RGB-D) cameras, each located at approximately $90^{\circ}$ from the next camera around a freely moving human body. A single mesh is constructed from the captured point clouds by iteratively removing the estimated overlapping regions from the boundary. A cell-based mesh construction algorithm is developed, recovering the 3D shape from various conditions, considering the direction of the camera and the mesh boundary. The proposed algorithm also allows problematic holes and/or occluded regions to be recovered from another view. Finally, calibrated RGB data is merged with the constructed mesh so it can be viewed from an arbitrary direction. The proposed algorithm is implemented with general-purpose computation on graphics processing unit (GPGPU) for real-time processing owing to its suitability for parallel processing.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.6
• /
• pp.83-90
• /
• 2009

Since traffic is aggregated to a MPP that acts as an Internet gateway, if traffic load is not balanced among the MPPs in a WMN, the overall performance of a WMN becomes poor even though the total traffic load is far below the capacity of the WMN. Therefore, in this paper, we propose a stochastic load balancing scheme where each MP (Mesh Point) probabilistically selects its serving MPP according to the congestion levels of MPPs. Through extensive simulations using ns-2, we have verified that our scheme can stabilize a WMN fast when congestion occurs and reduce packet loss rate by distributing traffic load of a congested MPP to multiple MPPs in the inverse proportional to their congestion levels. Compared to queue-based load balancing scheme, our method can decrease network stabilization time by 34 seconds, and reduce packet loss rate by 7.6%. Since the proposed scheme can reduce network stabilization time by efficiently using network resource, it is expected to contribute to the reliable operation of a WMN.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.04a
• /
• pp.341-348
• /
• 2004

This paper presents a modeling technique of cracks by combined extended and superposed finite element method (XSFEM) which is a combination of the extended finite element method (XFEM) and the mesh superposition method (sversion FEM). In the proposed method, the near-tip field is modeled by a superimposed patch consisting of quarter point elements and the rest of the discontinuity is treated by the XFEM. The actual crack opening in this method is measured by the sum of the crack openings of XFEM and SFEM in transition region. This method retains the strong point of the XFEM so it can avoid remeshing in crack evolution and trace the crack growth by translation or rotation of the overlaid mesh and the update of the nodes to be enriched by step functions. Moreover, the quadrature of the Galerkin weak form becomes simpler. Numerical experiments are provided to demonstrate the effectiveness and robustness of the proposed method.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.90-97
• /
• 2024

In this study, we employed Highly Ductile Cement Composite (HDCC) to evaluate the flexural performance of a RC slab that simulates the laminating structure of a seashell. To evaluate flexural performance, we produced conventional RC slab specimens, HDCC slab specimens, and HDCC-M slab specimens which biomimics a seashell's layered structure by inserting PE mesh inside the slab made of HDCC. A series of 4-point bending tests were conducted. Experimental results shows the flexural strength of the HDCC-M slab specimen was 1.7 times and 1.2 times higher than that of the RC and HDCC slab specimens, respectively. Furthermore, the ductility was evaluated using the ratio of yield deflection to maximum deflection, and it was confirmed that the HDCC slab test specimen exhibited the best ductility. This is most likely due to the fact that the inserted PE mesh separates the layers and increases ductility, while the HDCC passing through the mesh prevents the loss of load carrying capacity due to layer separation.

• Communications of the Korean Mathematical Society
• /
• v.24 no.3
• /
• pp.459-466
• /
• 2009

In this paper, a numerical scheme is introduced to solve the Cauchy problem for one-dimensional hyperbolic equations. The mesh points of the proposed scheme are distributed along characteristics so that the solution on the stencil can be easily and accurately computed. This is very important in reducing errors of the scheme because many numerical errors are generated when the solution is estimated over grid points. In addition, when characteristics intersect, the proposed scheme combines corresponding grid points into one and assigns new characteristic to the point in order to improve computational efficiency. Numerical experiments on the inviscid Burgers' equation have been presented.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.268-275
• /
• 2015

Blisk is an essential component in aero engines. To maintain good aero-dynamic performance, one critical machining requirement for blades on blisk is that the generated five-axis tool path should be boundary-conformed. For a blade discretely modeled as a point cloud or mesh, most existing popular tool path generation methods are unable to meet this requirement. To address this issue, a novel five-axis tool path generation method for a discretized blade on blisk is presented in this paper. An idea called Linear Morphing Cone (LMC) is first proposed, which sets the boundary of the blade as the constraint. Based on this LMC, a CC curve generation and expansion method is then proposed with the specified machining accuracy upheld. Using the proposed tool path generation method, experiments on discretized blades are carried out, whose results show that the generated tool paths are both uniform and boundary-conformed.