• 마이크로전자및패키징학회지
• /
• 제26권4호
• /
• pp.157-161
• /
• 2019

소재의 전기전도 거동과 열전도 거동을 독립적으로 제어하는 기술은 열전소재의 성능증대를 위한 효과적인 전략 중 하나로 인식되고 있다. 이를 구현하기 위해 다결정 소재가 근본적으로 포함하고 있는 결함구조와 열전소재의 물성과의 상관관계에 대한 수많은 연구가 진행되고 있으며, 최근 0 차원의 점결함 형성에 의해 전기전도 특성을 증대함과 동시에 열전도 특성을 저감하는 결과가 보고되고 있다. 본 논문에서는 점결함 형성에 의한 소재의 전기전도 거동 및 열전도 거동 변화에 대해 이론적 고찰을 진행하고, 벌크 열전소재에서 실험적으로 구현된 결과와 연계하여 고성능 열전소재 개발에 필수적인 소재설계 지침에 대한 실효적인 정보를 제공하고자 한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1516-1519
• /
• 1997

With disseminationof Distributed Control Systems(DCS), the huge amounts of process operation data could have been available and led to figure out process behaviors better on the statistical basis. Until now, the statistical modeling technology has been susally applied to process monitoring and fault diagnosis. however, it has been also thought that these process information, extracted from statistical analysis, might serve a great opportunity for process operation improvements and process improvements. This paper proposed a general methodolgy for process operation improvements including data analysis, backing up the result of analysis based on the methodology, and the mapping physical physical phenomena to the Principal Components(PC) which is the most distinguished feature in the methodology form traditional statistical analyses. The application of the proposed methodology to the Balst Furnace(BF) process has been presented for details. The BF process is one of the complicated processes, due to the highly nonlinear and correlated behaviors, and so the analysis for the process based on the mathematical modeling has been very difficult. So the statisitical analysis has come forward as a alternative way for the useful analysis. Using the proposed methodology, we could interpret the complicated process, the BF, better than any other mathematical methods and find the direction for process operation improvement. The direction of process operationimprovement, in the BF case, is to increase the fludization and the permeability, while decreasing the effect of tapping operation. These guide directions, with those physical meanings, could save fuel cost and process operator's pressure for proper actions, the better set point changes, in addition to the assistance with the better knowledge of the process. Open to set point change, the BF has a variety of steady state modes. In usual almost chemical processes are under the same situation with the BF in the point of multimode steady states. The proposed methodology focused on the application to the multimode steady state process such as the BF, consequently can be applied to any chemical processes set point changing whether operator intervened or not.

• 한국임상보건과학회지
• /
• 제4권4호
• /
• pp.699-708
• /
• 2016

Purpose. This study assessed the actual status of oral health behaviors, oral health consciousness and oral health belief with workers at work sites in some regions and would utilize the results of changes in the hygiene status in the oral cavity as basic materials for developing an education program for the oral health promotion of workers at work sites with the implementation of oral health education and oral health promotion program. Methods. The subjects of the study were 106 workers who expressed their intention to participate in a program in SMEs that agreed on the activities of an oral health education program through an education once per week, of the SMEs with less than 500 persons, located in G. City. General characteristics and the questionnaires of the items on the survey were investigated with a self-administered method, and the collected data were statistically analyzed, using SPSS 20.0. Results. As a result of research, it was noted that PHP-Index, the dental plaque index in the oral cavity became lower from 2.02 points to 1.00 point with continuous management and practice of oral promotion behaviors, and that the oral hygiene status improved. Conclusions. In order to promote the oral health of workers at work sites, substantially, it would be necessary to introduce an oral health promotion program they can practice themselves and through continuous education of oral health by assessing their consciousness and the actual status of their oral health behaviors, and it is expected that their oral health would be promoted ultimately by changing workers' oral health behaviors and consciousness.

• 대한간호학회지
• /
• 제16권3호
• /
• pp.97-107
• /
• 1986

This study was about nurse's helping behaviors and the purpose of the study was to find out the nurse's helping behaviors, to identify the nurse's helping behavior level by the nurses personal back-ground and to find out the relationship between the nurse's helping behavior and patient's self-exploration. The subjects, consisting of 192 adults in-patients who had less acute physical problem and 192 registered nurses working on these ward in 3 hospitals in Seoul and 1 hospital in Kang Won province of Korea. The data were collected from Jan. to rob. 1986 through the descriptive responds and self-reported questionaires. The instruments used for this study were Carkhuff's index of communication. Henderson's Irritating Listening Behavior, revised by the Kim(1984) and patient problem understanding scale, patients trust scale on nurse, developed by the Kim(1984). Analysis of the Data was done by use of mean, t-test, F-test and Pearson correlation coefficients. The results of study are summerized as follows; 1. Mean of nurse's helping behavior was 1.84 out of 4. These point were less than 3.0 which means the minimum points as the facilitative helper. 3. There was no significant differences of nurses helping behaviors to the nurse's personal back-ground (p<.05). 3. There were positive rotation between the nurse's helping behaviors and patient's self-exploration behavior (P<0001). In conclusion, 1 may can give some suggestion, according to the study results: 1. The systematic study about nurse's helping behavior is need all over the Korea. 2. Educational program for the facilitative relationship between nurses and patient must be developed, 3. Further detailed analysis methods are need on the independent variables of patient's self-explorations behavior.

• 기본간호학회지
• /
• 제6권1호
• /
• pp.18-34
• /
• 1999

Nurse's caring behaviors are essential to help patients cope with their health problems. The purpose of this study was to investigate the importance of nurse's caring behaviors as perceived by staff nurses and patients. The subjects were 295 staff nurses and 340 patients from five medical centers in Taegu. Data collection was done from Dec. 10, 1997 to Jan. 31, 1998. The tool for this study was a 7 point Likert type scale with 27 earing behaviors developed by Lee(1996). Cronbach alpha of the tool was .9701 in staff nurses and .9618 in patients. Data were analyzed with SAS using t-test, ANOVA and Spearman rank correlation program. The results are as follows : 1. The a verage score of perceived importance of nurse's taring behaviors for the 27 items was 5.65 in staff nurses and 4.97 in patients. 2. The most important caring behaviors perceived by the nurses was 'Nurse gives painless and cautious injection and treatment for patients' and for the patients, 'Nurse gives hygienic treatment and nursing care'. 3. The caring behavior which showed a significant difference between the ranks of perceived importance by staff nurses and patients was 'to treat the patient with tenderness and friendship'. 4. The Spearman rank correlation coefficient between the ranks of importance perceived by staff nurses and patients was 0.8302. With the results of this study, the staff nurses could be recognized to have much enthusiasm and passion about caring. It is suggested that nurses let the public know about the nurses' caring roles. In the future, research to investigate the actual practice of nurses' caring behavior is necessary.

• 여성건강간호학회지
• /
• 제16권2호
• /
• pp.147-156
• /
• 2010

Purpose: This study was to examine the relationship of knowledge, health beliefs, and prevention behaviors of osteoporotic fracture in outpatients with osteoporosis. Methods: The subjects were 120 outpatients receiving osteoporosis treatment on K hospital in G city from Dec. 2007 to Feb. 2008. Questionnaires were collected and analyzed using the SPSS/WIN 12.0 program for descriptive statistics, and t-test, ANOVA, and Pearson correlation coefficient. Results: Subjects were treated for fracture about 28 months. The mean score of knowledge, health belief and prevention behaviors in subjects were $17.5{\pm}3.22$, $2.8{\pm}0.23$ and $2.8{\pm}0.38$ respectively. The score of health belief recorded the lowest point. However, the score of knowledge varied with general and disease-related characteristics of subjects. In contrast, the score of prevention behaviors did not showed any significant differences. Fracture prevention behavior in subjects showed rather higher relationship with the health belief system than the knowledge of fracture prevention. Conclusion: The present work suggested that education program for prevention behaviors of fracture should be developed to focus on altering the health belief system rather than the knowledge of osteoporotic fracture prevention. Furthermore, individual education program based on living circumstances and daily life habits should be also developed.

• Journal of Preventive Medicine and Public Health
• /
• 제57권3호
• /
• pp.223-233
• /
• 2024

Objectives: The coronavirus disease 2019 pandemic has exacerbated the rate of tuberculosis (TB) infection among close contacts of TB patients in remote regions. However, research on preventive behaviors, guided by the Health Belief Model (HBM), among household contacts of TB cases is scarce. This study aimed to employ the HBM as a framework to predict TB preventive behaviors among household contacts of TB patients in the border areas of Northern Thailand. Methods: A cross-sectional study with multi-stage random sampling was conducted in Chiang Rai Province. The study included 422 TB patients' household contacts aged 18 years or older who had available chest X-ray (CXR) results. A self-administered questionnaire was used to conduct the survey. Results: The participants' mean age was 42.93 years. Pearson correlation analysis showed that TB preventive behavior scores were significantly correlated with TB knowledge (r=0.397), perceived susceptibility (r=0.565), perceived severity (r=0.452), perceived benefits (r=0.581), self-efficacy (r=0.526), and cues to action (r=0.179). Binary logistic regression revealed that the modeled odds of having an abnormal CXR decreased by 30.0% for each 1-point score increase in preventive behavior (odds ratio, 0.70; 95% confidence interval, 0.61 to 0.79). Conclusions: HBM constructs were able to explain preventive behaviors among TB patients' household contacts. The HBM could be used in health promotion programs to improve TB preventive behaviors and avoid negative outcomes.

• 보건행정학회지
• /
• 제16권3호
• /
• pp.70-85
• /
• 2006

The purposes of this study were (1) to describe patients' behaviors to protect themselves from medical errors and their involvement in decision making on the diagnostic and treatment procedures (2) to examine whether patients' characteristics, such as age, sex, education, experience of hospitalization and/or surgery influence their self protect behaviors and involvement in decision making on the diagnostic and treatment procedures. A survey was conducted with 99 patients visited one university hospital in Seoul, Korea. A 20-item questionnaire, a 4-point Likert scale, was used to measure the degree of patients' active involvement in decision making; patients' self protect behaviors regarding medication, hospitalization, and surgery; and communication (Cronbach's alpha=0.801). SPSS 12.0 was used for the descriptive and correlation analysis. Only 6.1% of the participants were involved in the decision making process for the diagnostic tests and treatment. More patients did self-protect behaviors associated with the medication than other areas but widely varied from 18.2 to 94.3 % among various items. More people with age of 60 or older compared to people in younger age groups reported more protect behaviors particularly associated with medication. Patient education is needed to improve their active role in preventing medical errors and to promote patients' safety.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.1-7
• /
• 2015

As energy consumption of building and the reduction of carbon dioxide emissions have been emphasized, phase change materials(PCM) have been introduced as building materials due to its high heat storage performance. Using shape-stabilizing technique, octadecane/xGnP shape-stabilized PCM(SSPCM) can prevent leakage and improve heat storage performance. The objectives of this study are to propose mix design method of concrete mixed with SSPCM and to evaluate mechanical behaviors of the concrete mixed with SSPCM manufactured according to the proposed mix design. Based on the previously reported material test result, the existing mix design of plain concrete(Concrete standard specification, 2009) is modified to consider reduction of strength in concrete due to the addition of SSPCM. To verify the proposed mix design, specimens are fabricated according to the proposed mix design and axial strength tests and three-point loading tests are performed. Test results show that compressive strengths of the tested specimens reach the designed strength even when two different mix ratios of SSPCM are used. From three-point loading tests, flexural stresses decrease as mix ratio of SSPCM increases.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.60-65
• /
• 2007

Local buckling behaviors of aluminum square tube beams reinforced by aluminum plates under three point bending loads have been analyzed using experimental tests combined with theoretical and finite element analyses. For this analysis true stresses were determined from applied loads and cross-sectional area records of a tensile specimen with a rectangular cross-section by real-time photographing. True strains were also obtained from in-situ local elongation measurements of the specimen gage portion by the multi-point scanning laser extensometer. Six kinds of aluminum tube beam specimens reinforced by aluminum plates were employed for the bending test. The bending deformation behaviors up to the maximum load analyzed by the numerical simulation agreed well with experimental ones. After passing the maximum load, reinforcing plate hindering the local buckling of the tube beam was debonded from the aluminum tube beam. An aluminum tube beam strengthened by aluminum plate on the upper web showed the most excellent bending capacity, which could be explained on the basis of the neutral axis shift and the local buckling deformation range.