• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.18-26
• /
• 2009

최근, 에너지 절감 및 환경보전의 한 방법으로서 LED광원을 이용한 고효율 조명기기의 요구가 증가하고 있다. 그러나 LED광원을 이용한 조명기기는 실내공간의 용도 및 사용자에 대한 고려를 배제한 채, 색상 및 패턴이 결정되어 시각적 불쾌감을 초래하고 있다. 이에 본 연구는 LED광원을 이용한 국부조명의 CCT의 변화가 작업자의 시작업 성능에 미치는 영향을 분석하여 실내공간의 용도 및 사용자를 고려한 조명 설계에 기초자료를 제시하고자 한다. 본 연구를 위해 2 종류의 LED광원과 1종류의 형광광원을 선정하였으며, 대학생 30명을 대상으로 오류수정작업과 읽기작업에 대한 정확도 및 소요시간을 평가하였다. 시작업 성능평가 결과, LED광원에서 오류수정 작업의 정확도는 형광광원에 비해 최대 2.5[%]가 증가되었으며, 소요시간은 최대 17.1[%]가 감소되었다. 또한 읽기작업 결과 소요시간은 LED광원에서 20.6[%]가 감소하였다.

• KIEAE Journal
• /
• 제2권2호
• /
• pp.33-38
• /
• 2002

There are a number of practical uses for devices which are capable of piping large amounts of light: illumination of areas where there would be maintenance, safety, or security problems with electronic light sources; piping sunlight into indoor areas for illumination; and the conversion of high luminous efficacy, good color quality, high intensity discharge lamps into more acceptable linear of area sources of light. Prism light guides are hollow structures which pipe light by means of total internal reflectin(TIR). These devices are unique in their ability to combine the efficiency of TIR with the relatively low cost of hollow structure. An important application stems from their ability to transform a point source of light such as an incandescent or discharge lamp into a linear or area source of light or illumination. We report the development of an economical, flexible prismatic film for fabricating the light guide wall. This guide geometries and films are currently under development.

• 한국컴퓨터그래픽스학회논문지
• /
• 제17권2호
• /
• pp.11-16
• /
• 2011

컴퓨터 그래픽스에서 그림자는 그림자 자체로서 뿐 아니라 장면 내 물체들 간의 거리감에 대한 단서를 제공함으로써 사실감 제고 측면의 매우 중요한 역할을 한다. 그림자를 표현하기 위한 전통적인 방법으로 그림자 매핑이나 그림자 볼륨 등의 기법들이 사용되지만 점광원(point light)을 가정하므로 결과가 자연스럽지 못하다. 반면, 면광원(area light)을 사용할 경우 부드러운 그림자를 생성하므로 좀 더 사실적인 그림자 표현이 가능하지만 광원면(light source surface) 전체에 대한 적분을 요구하기 때문에 계산비용이 매우 비싸다. 이러한 단점을 극복하기 위해 차폐물(occluder)의 광원으로의 역투사(back-projection)나 반영(penumbra)의 크기 계산을 통한 필터링 등 여러 방안들이 소개되었지만 낮은 수준(order)의 근사로 인한 누광(light bleeding)이나 물결현상(ringing effect), 그리고 성능저하 등의 문제가 발생한다. 본 논문에서는 그림자 아틀라스(shadow atlas)를 이용하여 이러한 문제들을 개선하는 방법에 대하여 기술한다.

• 한국컴퓨터정보학회논문지
• /
• 제15권3호
• /
• pp.111-119
• /
• 2010

인공조명의 특징은 중앙을 기준으로 수많은 방사형과 직선형 빛을 방출한다. 이러한 빛의 퍼짐을 3D로 표현하기는 매우 어렵고 복잡하다. 또한 빛의 효과에 따른 물체의 색상은 매우 다양하고 많은 변수 값 때문에 사용자가 정확히 물체를 표현하기 어렵다. 이러한 문제점을 해결하기 위하여 본 논문에서는 방사형과 직선형 빛을 손쉽게 표현하기 위한 모델을 제시하고 X3D를 사용하여 인공조명을 설계하였다. 그리고 사용자가 3D 물체의 색상을 정확하고 쉽게 표현할 수 있도록 물체의 색상을 요소별로 분리한 후 사용자가 직접 육안으로 각 요소의 색상 값을 관찰하며 조정하도록 온라인 시스템을 제안하였다. 제안된 시스템을 사용하여 다양한 인공조명을 손쉽게 생성할 수 있었다.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.375-380
• /
• 2022

We demonstrate two types of light field displays based on waveguide grating coupler arrays: a line beam type and a point source type. Ultra violet imprinting of an array of diffractive nanograting cells on the top surface of a 50-㎛-thin slab waveguide can deliver a line beam or a point beam to a multidirectional light field out of the waveguide slab. By controlling the grating vectors of the nanograting cells, the waveguide modes are externally coupled to specific viewing angles to create a multidirectional light field display. Nanograting cells with periods of 300 nm-518 nm and slanted angles of -8.5°~+8.5° are fabricated by two-beam interference lithography on a 40 mm × 40 mm slab waveguide for seven different viewpoints. It is expected that it will be possible to realize a very thin and flexible panel that shows multidirectional light field images through the waveguide-type diffraction display.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.99-102
• /
• 2009

The recent LCD TV market has made efforts to produce thinner, brighter, and clearer products, and experienced the rapid light source replacement from a line source of light CCFL to a point source of light LED. In particular, LGP(Light Guiding Panel) among key parts composing BLU(Back Light Unit) has limits of the injection molding technology as well as the mold design, its processing and manufacturing technology so that it is hard to produce large LGP over 40 inch. To produce large light-guide panels over 40 inch under the injection molding process, a mold 3D model was developed in the design process before manufacturing a mold and structure unification was processed through CAE analysis. As a result, it was possible to construct the mold design process, and it is expected to manufacture the optimized mold by applying the mold design and manufacturing process of large-scale rapid injection-compression molding that will be produced in the future.

• Transactions on Electrical and Electronic Materials
• /
• 제16권4호
• /
• pp.201-205
• /
• 2015

This paper dealt with the condensing technology of an LED light source that uses a parabolic reflector to replace a searchlight equipped with a xenon lamp. A ray-tracing simulation was conducted to analyze the influence of the diameter of the reflector and the size of the light source on light condensing. The combination of a parabolic reflector with a diameter of 620 mm and a focal distance of 220 mm, and a 9 mm multi-chip package (MCP) with a luminous flux of 7,000 lm showed the narrowest beam angle. The luminous intensity at the center was measured at 7.7×10⁶ cd. The distance between the light source and the point where the illuminance was 1 lx was calculated to be 2.8 km. The power consumption of the system was 95 W, which is only 9.5% of that of the 1 kW xenon searchlight, and the beam angle was 1.03°. In a site experiment, it was confirmed that the light ray reflected from the LED searchlight proceeds forward without any diffusion because of the narrow beam angle.

• 조명전기설비학회논문지
• /
• 제21권6호
• /
• pp.19-25
• /
• 2007

특정한 배광 구현을 위하여 부피를 갖는 실제 광원에 대한 프리즘 설계법을 연구하였다. 입사각을 알고 목표 방향으로 광선을 보내려 할 때, 프리즘 정각을 구하는 수식을 유도하였고, 순차적으로 프리즘 정각을 구하였다. 점광원으로 가정한 설계 결과의 문제점을 분석한 후 이를 보완하여 부피를 갖는 광원에 적용할 수 있는 설계법을 도출하였다. 각각의 설계 결과로 나온 배광과 효율을 비교, 분석하였고 보완된 설계법을 통해 개선된 결과를 얻을 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제18권9호
• /
• pp.1680-1688
• /
• 2004

The information indicating device plays an important part in the information times. Recently, the classical CRT (Cathod Ray Tube) display is getting transferred to the LCD (Liquid Crystal Display) one which is a kind of the FPDs (Flat Panel Displays). The OLED (Organic Light Emitting Diodes) display of the FPDs has many advantages for the low power consumption, the luminescence in itself, the light weight, the thin thickness, the wide view angle, the fast response and so on as compared with the LCD one. The OLED has lately attracted considerable attention as the next generation device for the information indicators. And also it has already been applied for the outside panel of a mobile phone, and its demand will be gradually increased in the various fields. It is manufactured by the vapor deposition method in the vacuum state, and the uniformity of thin film on the substrate depends on the temperature distribution in the point-cell source. This paper describes the basic concepts that are obtained to design the point-cell source using the computational temperature analysis. The grids are generated using the module of AUTOHEXA in the ICEM CFD program and the temperature distributions are numerically obtained using the STAR-CD program. The temperature profiles are calculated for four cases, i.e., the charge rate for the source in the crucible, the ratio of diameter to height of the crucible, the ratio of interval to height of the heating bands, and the geometry modification for the basic crucible. As a result, the blowout phenomenon can be shown when the charge rate for the source increases. The temperature variation in the radial direction is decreased as the ratio of diameter to height is decreased and it is suggested that the thin film thickness can be uniformed. In case of using one heating band, the blowout can be shown as the higher temperature distribution in the center part of the source, and the clogging can appear in the top end of the crucible in the lower temperature. The phenomena of both the blowout and the clogging in the modified crucible with the nozzle-diffuser can be prevented because the temperature in the upper part of the crucible is higher than that of other parts and the temperature variation in the radial direction becomes small.

• 한국전산유체공학회지
• /
• 제17권3호
• /
• pp.45-52
• /
• 2012

This paper is a study on the design of the solar lamp bank which is a very important part of the solar simulator with the commercial metal halide lamps and infrared lamps. Lamp Bank is designed by the lamp bank design program based on point light source theory. The reliability of the program for lamp bank design is verified through irradiance variation experiments of a kind of lamp according to horizontal distance. Solar lamp bank facilitates heat distribution and satisfies the irradiance in the three wave length which test guidelines require. The shape of the ceiling board next to the lamp bank to promote the lamp cooling efficiency and to reduce temperature deviation and air velocity deviation in the chamber is so creative. The ceiling board of partial closed type is the best among several types.