• Electrical & Electronic Materials
• /
• v.8 no.5
• /
• pp.640-647
• /
• 1995

In this study, the BaTiO$\sub$3/ capacitor add to MnO$\sub$2/ like depressor and shifter were investigated for temperature or voltage compensation by structural and electrical analysis. The relative density of BCTM, generating poly crystall and formation of lattice defect, has a 90[%] over as the CaTiO$\sub$3/ come out to control grain size. The current density of BCTM2 increased non-ohmic in high-electric field but that BCTM3 and BCTM4 had a few changing. The BCTM3 and BCTM4 unformated grain boundary shown temperature compensation properties, so that the dielectric constant was low value. The curie point was near 140[.deg. C] in BCTM1 and BCTM4, but BCTM3 and BCTM4 not shown the curie point. It is found that the charging energy of BCTM4 was changed 6[%] according to rising temperature from room temperature to 417[K]. The formation of BaMnO$\sub$3/ was low dielectric constant to change frequency and temperature.

• Archives of Plastic Surgery
• /
• v.35 no.5
• /
• pp.527-532
• /
• 2008

Purpose: Transverse type or volar oblique type of defect of thumb tip can be covered by Moberg flap or second toe pulp free flap. We compared these two methods in functional result, patients' satisfaction, and sensation, etc. to find a better way to cover the defect of the thumb tip. Methods: From 2003 to 2006, we chose the patients randomly with preoperative pictures. The patients had the defect of the thumb tip which is either transverse or volar oblique type. The 6 patients were treated with Moberg flap and other 6 patients were treated with second toe pulp free flap. We have analyzed the results by 2 point discrimination, side pinching power test, pulp to pulp pinching power test, pain scales (visual analogue scale), satisfaction scales of the patients (functional and aesthetic), the degree of the range of motion, etc. Results: All flaps survived without any complications. In the cases of Moberg flaps, the value of static 2 point discrimination test was 5.6 mm, and the value of moving 2 point discrimination test was 4.8 mm. In the cases of second toe pulp free flaps, the values were 9.6 mm and 9.3 mm. In the cases of Moberg flaps, the value of the Side pinch power test was 6.6 kg, 4.4 kg. In the case of second toe pulp free flaps, the values were 4.8 kg and 2.5 kg. The value of aesthetic satisfaction scale of the patients in Moberg flaps was 5.6, the value of functional satisfaction scale of the patients was 3.6. In cases of second toe pulp free flaps, the values were 5.6 and 3.6. The active range of motion of Interphalangeal joint in the cases of Moberg flaps was 46.6 degree, and the active range of motion of metacarpophalangeal joint was 55 degree, in the cases of second toe pulp free flaps, the values were 36.6 degree and 59 degree. Conclusion: As a result, when the defect of the thumb tip is transverse or volar oblique type, we suggest that the operators choose Moberg flap to cover the defect of the thumb tip.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.637-642
• /
• 2011

Rails are subjected to damage from rolling contact fatigue, which leads to defects such as cracks. Rolling contact fatigue damages on the surface of rail such as head check, squats are one of growing problems. Another form of rail surface damage, known as "Ballast imprint" has become apparent. This form of damage is associated with ballast particles becoming trapped between the wheel and the surface of rail. These defects are still one of the key reasons for rail maintenance and replacement. In this study, we have investigated whether the ballast imprint is an initiator of head check type cracks and effect of defect size using Finite element analysis. The FE analysis were used to investigate stresses and strains in subsurface of defects according to variation of defect size. Based on loading cycles obtained from FE analysis, fatigue analysis for each point was carried out.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.9 no.1
• /
• pp.22-29
• /
• 1989

The important point of MPI is the analysis of leakage field in the defective regions. The analysis of leakage field depends on many factors such like geometry and character of defect. In general the calculation of magnetic leakage fields arising from such defects presents an extremely complicated mathematical problem and is practically insoluable, since the inhomogeneities have complex geometrical shapes and may differ in physical nature. Therefore, this paper describes Hall probe measurements of residual leakage field around artificial flaws in alloy steel bar, and shows how the results to recent developments in 2D dipole and analytic models of the magnetic field defect interaction.

• Journal of the Korean Society of Safety
• /
• v.14 no.3
• /
• pp.25-32
• /
• 1999

This study has been performed to investigate the stress distribution around defects that behave as stress concentrators. Besides, the effect of stress interaction effects on the initiation of primary cracks were also investigated by rotary bending fatigue tests which were performed with specimens drilled micro surface defects and the stress distribution was analyzed using Finite Element Method. In addition, the stress interaction effects around defects and cracks were investigated by comparing the results of experiments and F.E.M. The results obtained are summarized as follows ; 1) Area which slip and micro cracks initiated at micro surface defects is between the maximum shear stress points and this area is over than ${\pm}30^{\circ}$ from the maximum stress point along the defect edge. 2) The stress interaction effect for the small size defect is larger than that of large size defect when the interval between them is near 3) Interval which there is no shear stress interaction effect analyzed by F.E.M. is larger than that of experimental results.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.134-142
• /
• 1998

The effects of small hole defect size and effective case depth(ECD) on the four point bending fatigue limit of induction surface hardened S45C steel were investigated the fatigue limit evaluation of hardened materials is very difficult because of relations of the hardness gradient and residual stress. In this study, it was possible to characterize fatigue limit and fatigue life of induction surface hardened S45C steel in terms of the hole defect size and effective case depth(ECD) and quantitative evaluation of the fatigue limit with hole defects use Murakami's evaluation method and the range of evaluated values is a good accuracy compared with results.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.774-779
• /
• 2003

Arc-shaped line array slits have been used for the laser generation of focused Lamb waves. The spatially expanded Nd:YAG pulse laser was illuminated through the arc-shaped line array slit on the surface of a sample plate to generate the Lamb waves of the same pattern as the slit. Then the generated Lamb waves were focused at the point of which distance from the slit position is dependent on the curvature of slit arc. The proposed method showed better spatial resolution than the conventional linear array slit in the detection of laser machined linear defect and drill machined circular defect on aluminum plates of 1mm thickness.

• Journal of Magnetics
• /
• v.6 no.1
• /
• pp.31-35
• /
• 2001

This paper describes the design method of a magnetic system to maximize the magnetic flux leakage (MFL) in a non-destructive testing (NDT) system. The defect signals in a MFL type NDT system mainly depend on the change of the magnetic leakage flux in the region of a defect. The characteristics of the B-H curves are analysed and a design method to define the operating point on B-H curves for maximum leakage is performed. The computed MFL signal by a nonlinear finite element method is verified by measurement using Hall sensors mounted on the 6 legs PIG, the traveling detector unit in gas pipe, in an 8 inch test tube with defects. The rhombic defects could be successfully identified from the defect signals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11b
• /
• pp.189-192
• /
• 2001

Recently, STI process is getting attention as a necessary technology for making high density of semiconductor by devices isolation method. However, it does have various problems caused by CMP nprocess, such as torn oxide defects, nitride residues on oxide, damages of si active region, contaminations due to post-CMP cleaning, difficulty of accurate end point detection in CMP process, etc. In this work, the various defects induced by CMP process was introduced and the above mentioned problems of CMP process was examined in detail. Finally, the guideline of future CMP process was presented to reduce the effects of these defects.

• Proceeding of EDISON Challenge
• /
• 2017.03a
• /
• pp.433-436
• /
• 2017

SIESTA를 이용하여 GaSe 단일층에서 금속 원자(Ga)를 전이금속 원자(W)로 치환하였을 때($W_{Ga}$)의 구조 deformation, 에너지 안정성, 전자구조와 자성을 확인하였다. 그 결과, 구조가 바뀌면서 평면에 수직한 방향으로 구조 변형이 나타났고, $W_{Ga}$에서 W의 NN는 Se이 되었다. Clean surface만큼 $W_{Ga}$도 안정된 구조임을 알 수 있었다. $W_{Ga}$에서 W에 의한 defect states가 up, down 6개씩 split되어 나타났으며, ${\Gamma}$ point에서 degenerated 경향을 보였다. 또한 W에 의한 magnetic moment는 $1{\mu}_B$인 것을 확인하였다. Defect states는 degenerated $d_{yz}$, $d_{zx}$ orbital character, degenerated $d_{xy}$, $dx^2-y^2$ orbital character, defect states는 $d_z{^2}$ orbital character을 띠는 것으로 나뉘었고, 이에 따라 에너지가 함께 높아졌다.