• Korean Institute of Interior Design Journal
• /
• v.18 no.6
• /
• pp.221-228
• /
• 2009

Recently severity of ecological adaptation and climatic change due to global warming grows larger. According to the fourth report of IPCC in 2007, emission quantity of the earth greenhouse gas(GHGs) generated by activity of mankind increased with 80% since 1970. And it is forecasted that worldwide greenhouse gas will be increased with 25~90%(corresponding to $CO_2$) between 2000 and 2030. This increment of greenhouse gas($CO_2$) is expected to raise average temperature of the earth with the maximum $6.4^{\circ}C$, and sea surface with 59cm in 2090. Like this, destruction of environment by greenhouse gas is regarded as universal problem threatening the existence, not only the problem of one nation. Consequently, systematic correspondence to the global warming at the aspect of energy consumption is also needed in Korea. From the analysis result of 'Statistics of Energy Consumption' published by Green Korea in 2007, energy consumption increment of domestic universities was higher as many as 3.7 times than 22.5% of the whole energy consumption increment in our country. This says to be the direct example which shows that universities are huge sources of greenhouse gas emission. New constructing and enlarging buildings of each universities within campus are the most major reason for such a large increment of energy consumption in universities. The opinion that the possibility of causing energy waste and efficiency reduction is raised by increased buildings of universities has been propounded. That is, universities should make concrete goal and the plan for reducing emission of green house gas against climatic change, and should practice. Accordingly, there is the meaning that 2 aspects of environment-friendly design characteristics, that is application of energy utilizing technology, material usage of energy efficiency-side and environment-side, and introduction of natural element in the environmental aspect, were analyzed for facilities of university campus designed in environment-friendly point of view from initial stage of plan, and direction of environment-friendly design of university facilities in the future was groped in order to grasp environment-friendly design tendency of internal and external University facilities based on this analysis of this paper.

• Korean Journal of Acupuncture
• /
• v.37 no.3
• /
• pp.203-208
• /
• 2020

Objectives : Since there are complex associations between diseases/symptoms and acupoints, one-to-one correspondence may not be the proper approach. Pattern identification has been being used as a clinical framework to make treatment decisions by extracting and synthesizing clinical data including patients' signs and symptoms. In this article, we propose two different models explaining the relationships between diseases and acupoints based on the branch treatment [Zhibiaofa] and the root treatment [Zhibenfa]. Methods : We explained the relationships between diseases/symptoms and acupoints from the example data from our previous study on traditional acupuncture point selection patterns for pain control. Diseases include low back pain, migraine, irritable bowel syndrome, osteoarthritis, ankle sprain, carpal tunnel syndrome, and dysmenorrhea, and acupoints included LI4, BL23, BL25, SP6, BL60, TE5, and CV4. Results : The relationships between diseases/symptoms and acupoints can be explained directly based on the branch treatment, and also can be explained indirectly through pattern identification based on the root treatment. Pattern identifications included both meridian-based pattern identification based on the spatial information of diseases and visceral organ-based pattern identification based on the characteristics of diseases. Conclusions : In the East Asian traditional medicine, Korean medicine doctors choose the most appropriate acupoints based either on the diseases/symptoms (i.e., branch treatment) or on the results of pattern identifications (i.e., root treatment). It is necessary to understand the two different approaches to choose specific acupoints for the targeted diseases.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.273-285
• /
• 2007

Most stereo matching methods use intensity values in small image patches to measure the correspondence between two points. If the noisy pixels are used in computing the corresponding point, the matching performance becomes low. For this reason, the noise plays a critical role in determining the matching performance. In this paper, we propose a method for combining intensity and edge filters robust to the noise in order to improve the performance of stereo matching using high resolution satellite imagery. We used intensity filters such as Mean, Median, Midpoint and Gaussian filter and edge filters such as Gradient, Roberts, Prewitt, Sobel and Laplacian filter. To evaluate the performance of intensity and edge filters, experiments were carried out on both synthetic images and satellite images with uniform or gaussian noise. Then each filter was ranked based on its performance. Among the intensity and edge filters, Median and Sobel filter showed best performance while Midpoint and Laplacian filter showed worst result. We used Ikonos satellite stereo imagery in the experiments and the matching method using Median and Sobel filter showed better matching results than other filter combinations.

• Journal of Korean Philosophical Society
• /
• v.144
• /
• pp.235-256
• /
• 2017

This essay considers Leibniz-Clark correspondence on the nature of space and hole argument. The ontology of space had been debated under the name of substantivalism-relationism controversy. The debates between the two parties are concerned with the nature of existence of parts of space-time. Substantivalism claims that the point of space-time has existence analogous to that of material substance. Relationism argues that space-time should be understood as the framework of possible spatio-temporal relations between bodies. Although these two approaches attempt to respect theoretical context, it seems that the problems of these two interpretive schemes stems from the lack of understanding of the structure of space-time theories, especially how space-time is connected with the laws of motion. In order to appreciate the substance-relation controversy without deviating from the context of space-time theories, it is necessary then to capture how space-time theories are constituted. This essay offers the clear connection of ontology of space-time with present practices of theoretical physicists.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.204-207
• /
• 2009

This paper presents how to implement Markerless Augmented Reality and how to create and apply reference data sets. There are three parts related with implementation: setting camera, creation of reference data set, and tracking. To create effective reference data sets, we need a 3D model such as CAD model. It is also required to create reference data sets from various viewpoints. We extract the feature points from the model image and then extract 3D positions corresponding to the feature points using ray tracking. These 2D/3D correspondence point sets constitute a reference data set of the model. Reference data sets are constructed for various viewpoints of the model. Fast tracking can be done using a reference data set the most frequently matched with feature points of the present frame and model data near the reference data set.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.11
• /
• pp.43-52
• /
• 2014

In this paper, we propose the target detection method using image displacement, and classification method using SURF(Speeded Up Robust Features) feature points and BAS(Beam Angle Statistics) in infrared images. The SURF method that is a typical correspondence matching method in the area of image processing has been widely used, because it is significantly faster than the SIFT(Scale Invariant Feature Transform) method, and produces a similar performance. In addition, in most SURF based object recognition method, it consists of feature point extraction and matching process. In proposed method, it detects the target area using the displacement, and target classification is performed by using the geometry of SURF feature points. The proposed method was applied to the unmanned target detection/recognition system. The experimental results in virtual images and real images, we have approximately 73~85% of the classification performance.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.270-277
• /
• 2021

In the power ultrasound fields, the flange position for fixing the transducer is an important factor influencing on electro-mechanical efficiency of the transducer. We suggested a practical method that can determine the installation position of the flange for different resonance modes of the bolt-clamped type Langevin ultrasonic transducer. A semicircular wedge-shaped jig was manufactured and moved along the lateral surface of the transducer. The vibration characteristics were examined after a constant pressure was applied to the semicircular wedge-shaped jig. By observing the change of the input admittance of the transducer depending on the position of the pressure application, the optimum position for the flange installation could be determined. The resonant modes of the transducer were calculated by a Mason's equivalent circuit, and the particle velocity distribution for each resonance mode was calculated by a transmission line model. Since the optimum positions determined from an experimental result show a good correspondence with the node positions of the vibration modes calculated by the transmission line model, the validity of the suggested method was verified.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.407-414
• /
• 2019

Recently, after the reorganization as the basis of NCS education, various learning methods are being sought for improving the basic occupational ability and job ability required by NCS, and the evaluation method accordingly is urgently needed. The purpose of this study was to evaluate the applicability of meta-cognitive learning and Havruta learning as evaluation cases in order to improve the job skills and basic skills required in the NCS curriculum. As a result, the meta-cognitive learning response sample statistic showed an average of 2.6883 when the pre-meta-cognitive learning questionnaire was a 5-point scale, and an average of 4.2468 after the meta-cognitive learning questionnaire. The correlation coefficient was 0.782 and the significance probability was 0.045. In the case of the Havruta learning correspondence sample statistic, the average of 3.1515 when the preliminary Havruta learning questionnaire was a 5 point scale and the average of the post-Havruta learning questionnaire was 4.3853, which was improved by 1.23 points. The correlation coefficient was 0.631 and the significance probability was 0.049. Meta-cognitive learning and Havruta learning were found to be correlated. The mean of meta cognition was 3.4675 and the mean of Havruta was 3.7684. Metacognitive learning and Havruta learning were -0.042 And there was no statistically significant difference. Therefore, the learning method to improve the job ability should be applied considering the characteristics of the subject.

• Korean Journal of Remote Sensing
• /
• v.37 no.3
• /
• pp.431-447
• /
• 2021

Recently, the use of high-resolution satellites is increasing in many areas. In order to supply useful satellite images stably, it is necessary to establish automatic precision geometric correction technic. Geometric correction is the process that corrected geometric errors of satellite imagery based on the GCP (Ground Control Point), which is correspondence point between accurate ground coordinates and image coordinates. Therefore, in the automatic geometric correction process, it is the key to acquire high-quality GCPs automatically. In this paper, we proposed iterative precision geometry correction method. we constructed an image pyramid and repeatedly performed GCP chip matching, outlier detection, and precision sensor modeling in each layer of the image pyramid. Through this method, we were able to acquire high-quality GCPs automatically. we then improved the performance of geometric correction of high-resolution satellite images. To analyze the performance of the proposed method, we used KOMPSAT-3 and 3A Level 1R 8 scenes. As a result of the experiment, the proposed method showed the geometric correction accuracy of 1.5 pixels on average and a maximum of 2 pixels.

• Journal of the Korean Geographical Society
• /
• v.29 no.1
• /
• pp.65-83
• /
• 1994

Sevaral problems of administrative area sysem in Korea have been brought up for a long time. Because its frame has remained since Chosun and Japanese colonial period in spite of changing local administrative environment in accordance with rapid industrialization and urbanization. Recent reform of city (Shi)- county (Gun) integration is derived from this argument. But problems which permeate deeply overall system cannot be solved by partial reorganization of Shi-Gun. They may be rationalized only through the reform of the whole system. The aims of this study are to analyze problems of administrative area system entirelr and to discuss the direction of its reform from that point of view. Major problems of administrative area system are summed up into the followings. Firstly, it is found that administrative hierarchies are too many levels. Contemporary administrative hierarchical structure is 4 levels: regional autonomous government (Tukpyolshi, Jik'halshi, Do), local autonomous government (Shi, Gun), two leveis of auxiliary administrative area (Up, Myun and Ri). These hierarchies were established in late period of Chosun which transportation was undeveloped and residential activity space was confined. But today developing transportion and expanding sphere of life don't need administrative hierarchical structurl with many levels. Besides developing administrative technology reduces administrative space by degrees. Many levels of contemporary administrative hierarchical structure are main factor of administrative inefficency, discording with settlement system. Second problem is that Tukpyolshi and Jik'halshi - cities under direct control of the central government as metropolitan area - underbounded cities. Underbounded city discomforts residential life and increases external elects of local pulic services. Especially this problem is Seoul, Pusan and Daegu. Third problem is that Do-areas are mostly two larger in integrating into single sphere of life. In fact each of them consistes of two or three sphere of life. Fourth Problem is metropolitan government system that central city is seperated from complementary area, i.e. Do. It brings about weakening the economic force of Do. Fifth problem is that several cities divided single sphere of life. It is main factor of finantial inefficency and facing difficult regional administration. Finally necessity of rural parish (Myun.) is diminished gradually with higher order center oriented activty of rural residents. First of all administrative area system should corresponds with substantial sphere of life in order to solve these problems. Followings are some key directions this study proposes on the reform of administrative area system from that standpoint. 1. Principles of reorgnization -- integration of central dty with complementary area. -- correspondence of administrative hierarchical structure with settlement system. -- correspondence of boundary of administrative area with sphere of life. 2. Reform strategy -- Jik'halshi is integrated with Do and is under the contol of Do. -- Small Seoul shi (city) which have special functions as captal is demarcated in Seoul tukpyolshi and 22 autonomous distrcts of Seoul tukpyolshi is integrated into 3-4 cities. -- Neighboring cities (Shies) in single sphere of life are intrgrated into single city (Shj). -- Myun and Ri are abolished in rural region and new unit of local administrative area on the basis of lowest order sphere of life into which 3-4 Ries are integrated replaces them.