• 한국고분자학회지:고분자과학과기술
• /
• 제20권6호
• /
• pp.575-582
• /
• 2009

• Macromolecular Research
• /
• 제10권1호
• /
• pp.2-12
• /
• 2002

The small-angle X-ray scattering (SAXS) beamline BL4C1 at the 2.5 GeV storage ring of the Pohang Accelerator Laboratory (PAL) has been in its first you of operation since August 2000. During this first stage it could meet the basic requirements of the rapidly growing domestic SAXS user community, which has been carrying out measurements mainly on various polymer systems. The X-ray source is a bending magnet which produces white radiation with a critical energy of 5.5 keV. A synthetic double multilayer monochromator selects quasi-monochromatic radiation with a bandwidth of ca. 1.5%. This relatively low degree of monochromatization is sufficient for most SAXS measurements and allows a considerably higher flux at the sample as compared to monochromators using single crystals. Higher harmonics from the monochromator are rejected by reflection from a flat mirror, and a slit system is installed for collimation. A charge-coupled device (CCD) system, two one-dimensional photodiode arrays (PDA) and imaging plates (IP) are available its detectors. The overall performance of the beamline optics and of the detector systems has been checked using various standard samples. While the CCD and PDA detectors are well-suited for diffraction measurements, they give unsatisfactory data from weakly scattering samples, due to their high intrinsic noise. By using the IP system smooth scattering curves could be obtained in a wide dynamic range. In the second stage, stating from August 2001, the beamline will be upgraded with additional slits, focusing optics and gas-filled proportional detectors.

• Journal of Magnetics
• /
• 제8권4호
• /
• pp.149-152
• /
• 2003

The electronic structure of Mn12-Ac molecular magnet has been investigated using synchrotron radiation. The valence-band photoemission spectroscopy (PES) measurement reveals that Mn 3d states are located near the top of the valence band. The trend in the measured valence-band PES spectra is found to be consistent with that in the calculated local density of states. The Mn 2p x-ray absorption spectroscopy (XAS) measurement provides evidence for the Mn$^{3+}$-Mn$^{4+}$ mixed-valent states.

• 한국주조공학회지
• /
• 제43권2호
• /
• pp.55-63
• /
• 2023

Due to the importance of the surface on the final slab quality, it is essential to maintain a smooth segment roll surface that is in touch with the thin solid shell during solidification. In this paper, the surface of the used continuous casting guide roll was analyzed to realize the mechanism of its surface deterioration. Surface analysis has revealed severe corrosion at two distinct areas leading to deep roughness occurring on the guide roll. Firstly, the severe corrosion follows prior austenite grain boundary due to exposure with acidic environment. Also, in heat affected zone (HAZ) where two cladding beads overlap, more severe corrosion takes place. The overheat input results in local ferritization without full melting which increases retained δ-ferrite content almost 10 times higher than surrounding area. Corrosion was observed to happen at the δ-γ interface where Cr depletion takes place.

• 무역학회지
• /
• 제46권6호
• /
• pp.127-142
• /
• 2021

The Pohang Youngilman Port is the only international trade port in the Daegu-Gyeongbuk region, but its cargo throughput has been stagnated since its opening. Finding out ways to revitalize the port has been a big issue in the region, taking its potential business effects on the surrounding areas into consideration. This study, therefore, aimed to critically evaluate the government policies and empirically analyze business environments of the Pohang Youngilman Port as a fundamental to reach solutions for its revitalization. The policy evaluation showed that there are discrepancies in viewing contexts, implementations and mechanisms of the port at each government level, which resulted in implementing various but inconsistent solutions. Also, the interview results were analyzed to point out the fundamental problems, such as limited cargo volume due to weak hinterland development, lack of shuttle shipping between Busan New Port and Pohang Youngilman Port, and lack of large shippers to diverse the shipping network. This study has academic and managerial implications in suggesting measures for facilitation of the Pohang Youngilman Port by amalgamating various viewpoints of governments and stakeholders, which can be used for policy development as well as practical solutions for the port.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2014년도 임시총회 및 하계학술연구발표회
• /
• pp.25-25
• /
• 2014

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.186.1-186.1
• /
• 2007

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2005년도 High Temperature Superconductivity Vol.XV
• /
• pp.42-42
• /
• 2005

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1996년도 춘계공동학술대회논문집; 공군사관학교, 청주; 26-27 Apr. 1996
• /
• pp.63-66
• /
• 1996

Cold rolling mill process in steel works uses stands of rolls to flatten a strip to a desired thichness. At Pohang Iron and Steel Company (POSCO) in Pohang, Korea, precalculation determines the mill settings before a strip actually enters the mill and is done by an outdated mathematical model. A corrective neural network model is proposed to improve the accuracy of the roll force prediction. Additional variables to be fed to the network include the chemical composition of the coil, its coiling temperature and the aggregated amount of processed strips of each roll. The network was trained using a standard backpropagation with 2,277 process data collected form POSCO from March 1995, then was tested on the unseen 200 data from the same period. The combined model reduced the prediction error by 55.4% on average.

• Macromolecular Research
• /
• 제17권6호
• /
• pp.436-440
• /
• 2009

We improved the performance of pentacene-based thin film transistors by changing the curing environment of poly(4-vinylphenol) (PVP) gate dielectrics, while keeping the dielectric constant the same. The field-effect mobility of the pentacene TFTs constructed using the vacuum cured PVP was higher than that of the device based on the Ar flow cured gate dielectric, possibly due to the higher crystalline perfection of the pentacene films. The present results demonstrated that the curing conditions used can markedly affect the surface energy of polymer gate dielectrics, thereby affecting the field-effect mobility of TFTs based on those dielectrics.