• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.162-169
• /
• 2001

There are many EMU lines in korea. But only one type has been applied to passenger side door. This type is so called "Pocket sliding type". This type has some week points. To begin with, it is not good for decreasing the noisy form the outside of carbody. And the second time, if some obstacles are put between sliding door, only driver can operate re-open door switch manually ill driver's cab. This type is so dangerous for passengers. So many people want to the new door type that have no defect. KRRI joined forces with ANT corporation for pneumatic plug door system. This type will be good for decreasing the noisy, passenger′s safe. The project was started at the last year on November and will be finished on June, this year In this paper, we will deal with the role of cylinder, planetary gear, door control unit, dynamic mechanism, and the report of FEM, type test. This paper will contribute to tile electric motor control plug door system.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.2
• /
• pp.139-146
• /
• 2011

The breaking wave pressure occurs when a plunging breaker instantaneously impinges on structural surface, and appears differently depending on whether or not to form air pockets at the instant of contact. The Wagner type normally forms a single pressure peak at the contact spot due to the direct collision of water volume to the structure whereas in the Bagnold type the time lagged oscillation of the air pocket causes pressure peaks even at areas away from the spot. In the present study, the Bagnold's impact pressure is numerically and experimentally investigated for the bulkhead of an underwater tunnel under construction which is subjected to nearby breaking waves. A numerical solver of Navier-Stokes equations was applied to reproduce the breaking waves near a bulkhead, and the results showed the Bagnold's impact pressure occurring on the back (land side) face of the bulkhead. The existence of the impact pressure was also verified by a hydraulic model testing, and it was found that the experimental results well conformed to their numerical counterparts.

• Journal of the Korea Convergence Society
• /
• v.9 no.4
• /
• pp.303-311
• /
• 2018

This study was conducted to examine the relations of oral health relevance to disabilities according to the relationship types between them and their guardian. The guardians were surveyed using self-writing questionnaires regarding the cohesion and communication process, and the oral health of disabled was analyzed by evaluation table. Total 78 copies were analyzed. SPSS win. 24.0 statistical program was used and the significance level was verified at .05. There was significance in the communication process(p<.01) according to the type of relationship with the disabled and their guardians. In oral health of the disabled according to the type of relationship with their guardians, there was significance in DMFT index(p<.01), first molar soundness(p<.01) and Pocket depth(p<.01).Therefore, the mother had a positive effect for the disabled on most items such as cohesion, communication process, and oral health. However, it is expected that policy support and research to increase the interests in oral health care management are needed for personal assistants, who showed a low impact on the cohesion, and communication process with disabled persons, and spouses, who showed a low influence on oral health of persons with disabilities.

• Journal of Korean Society of Forest Science
• /
• v.99 no.3
• /
• pp.298-303
• /
• 2010

To explore on the defense strategies against hervivory of Juglans regia and J. mandshurica, morphological characteristics of the leaf, leaf domatia structure and the number, herbivores insects and mites on the leaves, collected from the trees growing in Mt. Chiak, Mt. Cheongtae, Mt. Jungwang, Namyangju-si and Wonju-si, were investigated from May to October, 2009. Domatia of J. mandshurica revealed tuft type, these of J. regia revealed pocket+tuft type. Domatia number per leaflet proved the higher figures, 28.3/leaflet for J. mandshurica, and the lower, 19.6/leaflet for J. regia. Leaf surface trichomes of J. regia revealed stellates only on the domatia structures, and that of J. mandshurica does dense stellates and glandular hairs on the leaf-blade and vein. Predatory mites' number per leaflet proved highly significant differences among tree species, and mean of predatory mites was higher values (4.8/leaflet) in J. mandshurica and lower values (3.5/leaflet) in J. regia. Small amount of nectar are found distal veinparts on the leaf margin of J. mandshurica. Dense glandular hairs on the lower leaf surfaces of J. mandshurica estimates useful strategy against herbivory. It may be possible to breed J. regia for better expression of leaf traits such as dense glandular hairs that increase predator populations and efficacy.

• Korean Journal of Environment and Ecology
• /
• v.23 no.5
• /
• pp.411-417
• /
• 2009

This research is intended to discover physiological and biochemical defense mechanisms against herbivores of 8 species of the genus Acerby examining the morphological characteristics of the leaf, the structure and number of leaf domatia, herbivores insects and mites feeding on leaves, which were collected from the trees growing in Mt. Chiak, Mt. Cheongtae, Mt. Jungwang, Mt. Bangtae, Mt. Taebaek and Wonju City. This research was conducted from May through July, 2009, and the results are as follows. The domatia of A. pseudosieboldianum, A. pictum subsp. mono and A. mandshuricum belongs to tuft type; that of A. palmatum, A. triflorum and A. tschonoskii pocket+tuft type; and that of A. tegmentosum pocket type. The number of domatia per leaf turned out to be the highest in the case of A. tegmentosum(20.2), and the lowest in the case of A. ginnala (4.2). Leaf surface trichomes of A. palmatum, A. pseudosiebotdianum, A. ginnala and A. mandshuricum are covered with villi; those of A. pictum subsp. mono and A. triflorum with soft, pilose type of hair, and those of A. tschonoskii with stiff, strigose hair. The trichome density of lower leaf surface is found to be higher than that of the upper leaf surface. Only in the case of A. palmatum, A. pseudosieboldianum, A. tegmentosum and A. tschonoskii, a small amount of nectar is found to be secreted from the distal vein parts of the leaf margin. The number of mites on each leaf are found to be significantly different among tree species, and average mites number per leaf was the highest in the case of A. tschonoskii (9.2/leaf), and A. mandshuricum, A. pseudosieboldianum, and A. triflorum follow it in decreasing order. Minute insects attacking the leaf of Acer spp. include Periphyllus californiensis, P. viridis, Psylla spp, and gall mites, and the number of these insects are found in Periphyllus californiensis, Psylla spp, P. viridis, and Cicadellidae sp. in decreasing order. The natural enemies of these herbivores insects are predatory mites, such as Chilocorus rubidus, Coccinella septempunctata and the nymph, Aphidius ervi, Poecilocoris lewisi and its larva, and Poecilocoris lewisi. Lasius japonicus and Formica japonica are symbiotic with aphids, and supports herbivores. Finally, our research confirmed that predatory mites attack Periphyllus californiensis and suck the body fluid of their victim. This proves that mites form a symbiotic relationship with plants through the mediation of leaf domatia. This also indicates that a protective mutualism may be more conspicuous in temperate broad-leaved trees.

• Journal of Satellite, Information and Communications
• /
• v.10 no.4
• /
• pp.6-11
• /
• 2015

The ESD(electrostatic discharge) protection performance of PPS(PMOS pass structure) embedded N-type silicon controlled rectifier(NSCR_PPS) device with different GPNS(Gate to Primary $N^+$ Diffusion Space) structure was discussed for high voltage I/O applications. A conventional NSCR_PPS standard device with FPW(Full P-Well) structure and non-CPS(Counter Pocket Source) implant shows typical SCR-like characteristics with low on-resistance(Ron), low snapback holding voltage(Vh) and low thermal breakdown voltage(Vtb), which may cause latch-up problem during normal operation. However, our proposed NSCR_PPS devices with modified PPW(Partial P-Well) structure and optimal CPS implant demonstrate the improved ESD protection performance as a function of GPNS variation. GPNS was a important parameter, which is satisfied design window of ESD protection device.

• Journal of Periodontal and Implant Science
• /
• v.34 no.2
• /
• pp.255-268
• /
• 2004

The purpose of the research is to compare the distribution of Black-pigmented Bacteroides between Chronic Periodontitis and Aggressive Periodontitis. P. gingivalis, P. intermedia and P. nigrescens were examined in order to evaluate their distribution in patients with Chronic Periodontitis(CP) and Aggressive Periodontitis(AP). PCR and dot-blots hybridization of 16s rRNA gene were used to compare bacterial distribution of two groups - CP group and AP group, which were divided into two subgroups. Subgingival plaque taken from the diseased sites(pocket $depth{\geq}6$ mm) and healthy sites(pocket $depth{\leq}3$ mm) were grouped into the experimental group and the control group. The result are as follows ; 1. The distribution of P. gingivalis was 98.33% for chronic Periodotitis(CP), 94.17% for Aggressive Periodontitis(AP), the distribution of P. intermedia was 77.50% for CP, 64.17% for AP, and the distribution of P. nigrescens was 35.00%, 29.17%. In all 3 types of bacteria, CP group showed higher distribution compared to AP group, but only P. intermedia showed statistically significant difference. 2. In the case of CP, every type of bacteria showed higher distribution in the experimental group with statistically significant difference. 3. In the case of AP, every type of bacteria also showed higher distribution in the experimental group, but P. gingivalis and p..intermedia showed the result with statistically significant difference, and the other did not 4. In 3 all bacteria type, N-AP showed higher distribution than N-CP without statistically significant difference These results suggest that the comparison of the distribution of Bacteroides between Chronic Periodontitis and Aggressive Periodontitis has no statistically significant difference, except P. intermedia.

• The Research Journal of the Costume Culture
• /
• v.26 no.4
• /
• pp.632-648
• /
• 2018

This study aims to contribute to the development of sports wearables. It was conducted by a convergence team of professionals in the fashion industry, kinesiology and sports studies, and computer science and engineering. The purpose of the current study was to design and develop a fabric-type fitness band for a sensor to measure acceleration during jump rope exercises. Computer science and engineering professionals developed the Arduino board and sensor, kinesiology and sports studies provided the necessary exercise protocol, and the fashion industry professionals developed the band. First, a fitness band preference survey was completed by men and women between the ages of 20 and 50. Typical uses of the band included tracking exercise amount as measured by the number of steps taken and calories burned. Strap watch closure, a single color and achromatic color, and soft and smooth touch materials were preferred as band design. Second, two fabric-type fitness bands were designed and developed. Design 1 had a 3-dimensional pocket for the sensor, bright blue color, and stretch binding around the edges and for a loop. Design 2 had a flat pocket for the sensor, achromatic color, mesh binding around the edges and two metal loops. Both designs had Velcro as a closure. Third, wear testing of both bands with the sensor were conducted of 15 women in their 20s. They wore the bands during jump rope exercises. Both bands generally satisfied the participants. The Design 2 band was slightly more satisfying than the Design 1 band.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2494-2504
• /
• 2014

P38 mitogen activated protein (MAP) kinase is an important anti-inflammatory drug target, which can be activated by responding to various stimuli such as stress and immune response. Based on the conformation of the conserved DFG loop (in or out), binding inhibitors are termed as type-I and II. Type-I inhibitors are ATP competitive, whereas type-II inhibitors bind in DFG-out conformation of allosteric pocket. It remains unclear that how these allosteric inhibitors stabilize the DFG-out conformation and interact. Organosilicon compounds provide unusual opportunity to enhance potency and diversity of drug molecules due to their low toxicity. However, very few examples have been reported to utilize this property. In this regard, we performed docking of an inhibitor (BIRB) and its silicon analog (Si-BIRB) in an allosteric binding pocket of p38. Further, molecular dynamics (MD) simulations were performed to study the dynamic behavior of the simulated complexes. The difference in the biological activity and mechanism of action of the simulated inhibitors could be explained based on the molecular mechanics/generalized Born surface area (MM/GBSA) binding free energy per residue decomposition. MM/GBSA showed that biological activities were related with calculated binding free energy of inhibitors. Analyses of the per-residue decomposed energy indicated that van der Waals and non-polar interactions were predominant in the ligand-protein interactions. Further, crucial residues identified for hydrogen bond, salt bridge and hydrophobic interactions were Tyr35, Lys53, Glu71, Leu74, Leu75, Ile84, Met109, Leu167, Asp168 and Phe169. Our results indicate that stronger hydrophobic interaction of Si-BIRB with the binding site residues could be responsible for its greater binding affinity compared with BIRB.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.28-33
• /
• 2017

Recently, the operation of precision pocket machining has been studied for the high speed and accuracy in industry to increase production and quality. Moreover, the demand for products with complex 3D free-curved surface shapes has increasing rapidly in the development of computer systems, CNC machining, and CAM software in various manufacturing fields, especially in automotive engineering. The type of aluminum (Al6061) that is widely used in aerospace fields was used in this study, and end-mill down cutting was conducted in fillet cutting at a corner with end-mill tools for various process conditions. The experimental results may demonstrate that the end mill cutter with four blades is more advantageous than that of the two blades on shape forming in the same condition precise machining conditions. It was also found that cutting forces and tool deformation increased as the cutting speed increased. When the tool was located at $45^{\circ}$ (four locations), the corner was found to conduct the maximum cutting force rather than the start point of the workpiece. The experimental research is expected to increase efficiency when the economical precision machining methods are required for various cutting conditions in industry.