• Journal of International Academy of Physical Therapy Research
• /
• v.5 no.1
• /
• pp.641-646
• /
• 2014

The purpose of this study is to observe how balance exercise on an unstable platform and on a stable platform affects balance ability. The subjects were 35 adults in their 20s and were randomly assigned to a stable platform group and an unstable platform group. They performed balance exercise three times per week for six weeks. Balance exercise introduced by previous research was modified and complemented for use in this study. Balance ability of the subjects was measured through center of pressure(COP) area, medial-lateral displacement, and anterior-posterior displacement using a portable balance platform BT4. There was significant difference in the COP area between the unstable platform exercise group and the stable platform exercise group. In comparison in differences between the unstable platform exercise group and the stable platform exercise group after the exercise, there was significant difference in anterior-posterior movement. Therefore, exercise on an unstable platform is more effective than exercise on a stable platform in strengthening balance ability.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.373-378
• /
• 2004

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probebased Storage Device). However, most of them have low area efficiency, which is undesirable as data storage devices, since all of the components (springs, comb electrodes, anchors, platform, etc.) are placed in-plane. In this paper, we present a novel structure of electrostatic 2-axis MEMS stage that is characterized by having large area platform. For large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. In this article, the structures and operational principle of the MEMS stages are described, followed by design procedure, structural and modal analysis using FEM(Finite Element Method). The area efficiency of the MEMS stage was designed to be about 55％, that is very large compared with conventional ones having a few percentage.

• Proceedings of the KIEE Conference
• /
• 2007.04a
• /
• pp.172-174
• /
• 2007

In this paper, we designed a embedded system that will perform a primary role of Tangible Space implementation. This hardware includes function of image capture through camera interface, image process and sending off image information by LAN(local area network) or WLAN(wireless local area network). We define this hardware as a network based Visual Agent Platform for Tangible Space, This Visual Agent Platform includes the software that is RTLinux and CORBA

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.238-242
• /
• 2021

Through diversification of 4th industries and transportation and globalization, tourism was developed for medical purposes, not limited to touring tourist attractions. The trend of medical tourism in Korea is shifting from large and medium-sized hospitals to professional medical services in one area of small hospitals rather than professional medical services. However, small hospitals lack medical coordinators and interpretation services, and tourists who visit Korea for treatment lack information on small hospitals. Therefore, a platform is needed to match small hospitals with medical tourists. In this study, using Platform as a Service (Paas) in cloud computing, clinic administrators can access the app to introduce information about their hospitals with simple manipulations. Tourists also want to propose a customized platform to select the right area for them to check information about small-scale hospitals and choose the treatment and tourist attractions they wants. In this study, using Platform as a Service (Paas) in cloud computing, clinic administrators can access the app to introduce information about their hospitals with simple manipulations.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.82-90
• /
• 2006

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probe-based Storage Device). However, all of the components(platform, comb electrodes, springs, anchors, etc.) in those stages are placed in-plane so that they have low areal efficienceis, which is undesirable as data storage devices. In this paper, we present a novel structure of an electrostatic 2-axis MEMS stage that is characterized by having large area platform. for obtaining large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. The structure and operational principle of the MEMS stage are described, followed by a design procedure, structural and modal analyses using FEM(Finite Element Method). The areal efficiency of the MEMS stage was designed to be about 25%, which is very large compared with the conventional ones having a few percentage.

• Smart Structures and Systems
• /
• v.29 no.3
• /
• pp.499-512
• /
• 2022

This work proposes a novel contactless vibration damping and thermal isolation tripod platform based on Superconducting Magnetic Levitation (SML). This prototype is suitable for cryogenic environments, where classical passive, semi active and active vibration isolation techniques may present tribological problems due to the low temperatures and/or cannot guarantee an enough thermal isolation. The levitating platform consists of a Superconducting Magnetic Levitation (SML) with inherent passive static stabilization. In addition, the use of Operational Modal Analysis (OMA) technique is proposed to characterize the transmissibility function from the baseplate to the platform. The OMA is based on the Stochastic Subspace Identification (SSI) by using the Expectation Maximization (EM) algorithm. This paper contributes to the use of SSI-EM for SML applications by proposing a step-by-step experimental methodology to process the measured data, which are obtained with different unknown excitations: ambient excitation and impulse excitation. Thus, the performance of SSI-EM for SML applications can be improved, providing a good estimation of the natural frequency and damping ratio without any controlled excitation, which is the main obstacle to use an experimental modal analysis in cryogenic environments. The dynamic response of the 510 g levitating platform has been characterized by means of OMA in a cryogenic, 77 K, and high vacuum, 1E-5 mbar, environment. The measured vertical and radial stiffness are 9872.4 N/m and 21329 N/m, respectively, whilst the measured vertical and radial damping values are 0.5278 Nm/s and 0.8938 Nm/s. The first natural frequency in vertical direction has been identified to be 27.39 Hz, whilst a value of 40.26 Hz was identified for the radial direction. The determined damping values for both modes are 0.46% and 0.53%, respectively.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.258-260
• /
• 2006

In this paper, we designed a embedded system that will perform a primary role of Tangible Space implementation. This hardware includes function of image capture through camera interface, image process and sending off image information by LAN (local area network) or WLAN(wireless local area network). We define this hardware as a network based Visual Agent Platform for Tangible Space

• Journal of the Korean Society of Safety
• /
• v.21 no.6 s.78
• /
• pp.1-6
• /
• 2006

Subway platform is divided into Side-platform type and Center-platform type. In this study does quantitative fire risk assesment of subway platform types in numerical analysis by using CFD model. From the result of this study, 1) All exhaust mode was low-end result it seems most fire risk at Side-platform station. 2) All exhaust mode was low-end result it seems most fire risk at Center-Platform station. 3) When comparing same type exhaust mode of Side-platform and Center-platform that last thing was visible $9.1{\sim}72.34%$ low-end fire risk. Center-platform is more opera-tive than Side-platform that reduce fire risk when that was same dimension and external environment. Designer look upon a fire characteristic of subway platform types when he make smoke control air volume and platform area design.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.353-363
• /
• 2019

This paper presents a comprehensive simulation and assessment of gas dispersion above sea from a subsea release using a Computational Fluid Dynamics (CFD) approach. A 3D CFD model is established to evaluate the behavior of flammable gas above sea, and a jack-up drilling platform is included to illustrate the effect of flammable gas cloud on surface vessels. The simulations include a matrix of scenarios for different surface release rates, distances between surface gas pool and offshore platform, and wind speeds. Based on the established model, the development process of flammable gas cloud above sea is predicted, and the dangerous area generated on offshore platform is assessed. Additionally, the effect of some critical factors on flammable gas dispersion behavior is analyzed. The simulations produce some useful outputs including the detailed parameters of flammable gas cloud and the dangerous area on offshore platform, which are expected to give an educational reference for conducting a prior risk assessment and contingency planning.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.423-425
• /
• 2004

This raper deals with a platform for diagnosis monitoring of partial discharge based on Java virtual machine. This platform is designed for estimating diagnostic parameters of partial discharge signal and displaying Web-page on operating status. For Web-service, hardware of platform is based on a Strongarm processor and software base is designed on Linux and java virtual machine.