• 한국정보통신학회논문지
• /
• 제13권11호
• /
• pp.2260-2266
• /
• 2009

본 논문에서는 플랜지된 평행평판도파관으로 급전된 슬릿과 이에 평행하고 근접하는 도체 스트립과의 전자기적인 결합문제를 단순화된 근접주사현미 경의 관점에서 연구하였다. 슬릿의 등가어드미턴스, 슬릿근처 도파관 내부 및 외부의 무효전력, TEM파 전압반사계수의 크기 및 위상 등의 변화결과로부터 플랜지된 평행평판도파관의 특성을 조사하였다. 제안된 구조의 근접주사현미경으로서의 성능을 다양한 구조적인 파라미터들(도파관 높이, 슬릿의 폭, 스트립의 폭, 슬릿과 스트립 간격, 슬릿 폭과 도파관 높이의 비)이 TEM파 전압반사계수의 크기와 위상에 미치는 영향을 관찰하여 점검하였다. 슬릿으로부터 스트립의 변위에 따른 전압반사계수의 변화결과로부터 도파관의 높이가 작을 때 보다 높은 주사해상도를 얻을 수 있음과 반사계수의 크기 변화에 비해 위상변화가 훨씬 민감함을 확인하였다.

• 한국수산과학회지
• /
• 제25권3호
• /
• pp.165-170
• /
• 1992

1. 우리나라의 강원도 죽변, 경북 영덕, 경남 일광면, 의창군, 충무, 삼천포와 일본의 암수현 대퇴만, 복정현 포저만, 신내천현 횡수하만의 호하대에 서식하는 진주담치를 채집하고, 패각의 내부형태에 관해 조사하였다. 2. 각고에 대한 전폐각근흔 길이의 비율을 조사한 결과 평균치가 가장 큰 것은 경북 영덕산으로 62.47이었으며, 가장 작은 것은 의창산으로 54.17이었다. 이 값은 유럽의 남방종(Mytilus galloprovincialis)의 값 66.06과 유사하며, 유럽 북방종(Mytilus edulis)의 값인 94.79와는 큰 차이가 있음을 알 수 있었다. 3. 각고에 대한 교판길이(hinge plate length)의 비율을 조사한 결과 평균치가 가장 큰 것은 죽변 산으로 61.31이었으며, 가장 작은 것은 일본 대퇴산으로 56.15였다. 이 값은 유럽 남방종(M. galloprovincialis)의 값 59.39와 유사하며, 유럽 북방종(M. edulis)의 값 84.80과는 큰 차이가 있음을 알 수 있었다. 4. 이상의 연구에서 우리나라와 일본 난류역연안에 서식하는 진주담치는 그 패각의 내부형태적 특징에서 지중해 연안, 즉 유럽 남방종인 Mytilus galloprovincialis와 동일한 사실이 판명되었다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.77-80
• /
• 2005

Recently the construction of high-rise hybrid type building is progressively increased as the social demands. It is significantly important factors such as economy, the safety of structure, and the flexibility of internal space. Therefore new hybrid structural system, using slim flat plate system, is also required to be attained the reduction of story height, the flexibility and efficient use of space. The most suitable structural system is ,with the economy and flexibility, flat plate system in high-rise hybrid type building. But it was focused in the seismic performance for high performance flat plate system in high-rise hybrid type building. Therefore, in the study, to develop the new flat-plate system with high ductile, durable, good performance for the applications. It was evaluated the seismic performance in the critical region of slab-column connection. And then high performance flat plate system, designed by the economy and safety, was developed as a new technique in the application of high-rise hybrid type building.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.420-425
• /
• 2008

PMMA light guiding plate with nano-sized pattern was fabricated using anodized aluminum oxide membrane as a template for nano imprint lithography. Nano-sized pore arrays were prepared by the self-organization processes of the anodic oxidation using the aluminum plate with 99.999% purity. Since the aluminum plate has a rough surface, the aluminum plate with thickness of 1mm was anodized after the pre-treatments of chemical polishing, and electrochemical polishing. The surface morphology of the alumina obtained by the first anodization process was controlled by the concentration of electrochemical solution during the first anodization. The surface morphology of the alumina was also changed according to temperature of the solution during chemical polishing performed after first anodization. The pore widening process was employed for obtaining the one-channel with flat surface and height of the channel because the pores of the alumina membrane prepared by the fixed voltage method shows the structure of two-channel with rough surface. It is shown from SPM results that the nano-sized pattern on PMMA light guiding plate fabricated by nano imprint lithography method was well transferred from that of anodized aluminum oxide template.

• 설비공학논문집
• /
• 제17권9호
• /
• pp.839-848
• /
• 2005

Plastic plate heat exchangers have many advantages over the conventional heat exchangers such as aluminum plate heat exchangers, rotary wheel heat exchangers and heat pipe heat exchangers which have been used for ventilation heat recovery in the air-conditioning systems. In the present study, pressure drop and heat transfer characteristics of plastic plate heat exchangers are investigated for various design parameters and operating conditions which affect the performance of the plastic plate heat exchangers. In flat plate type heat exchanger, material thickness and channel height of heat exchanger are considered, and corrugate size and heat transfer area are considered in case of corrugate type heat exchanger. Pressure drop and effectiveness of the corrugate type heat exchanger increase as the corrugate size decreases.

• 한국강구조학회 논문집
• /
• 제23권2호
• /
• pp.221-228
• /
• 2011

강 판형교는 높은 세장비 때문에 좌굴이 설계의 주요 변수이다. 본 연구의 목적은 I 형 플레이트 거더와 파형 복부판을 갖는 플레이트 거더의 좌굴거동을 분석하고, 파형 복부판을 갖는 플레이트 거더의 이점을 조사하는 것이다. 파형 복부판 깊이의 변화, 복부판의 두께 변화 그리고 하중조건의 변화에 따라 다양한 파라미터 연구를 수행하였다. 연구의 결과로서 파형 복부판을 갖는 플레이트 거더의 좌굴강도가 I 형 플레이트 거더에 비해서 좌굴강도에 있어서 46%~417% 더 효과적이며, 파형 복부판을 갖는 플레이트 거더의 적절한 파형각도는 ${\theta}=15^{\circ}{\sim}22^{\circ}$로 나타났다.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.99-105
• /
• 1999

The flatness is the most important nature for the surface plates. For finding such a flatnes a surface plate is surveyed along a number of straight lines parallel to the edges of plate which form a grid pattern. Next the variations in height of the grid points are measured relative to a datum point. the relation between the number of such grid points and the flatuness of a measured surface plate is formulated in this study. In addtion it is found that the grid-point-numbers suggested by KS B 5254 and JIS B 7513 have very poor reliability for estimation of flatness incase of the surface plates with poor original flatness.

• 한국분무공학회지
• /
• 제4권2호
• /
• pp.40-46
• /
• 1999

Experimental investigation of unsteady impinging diesel spray on the flat plate have been carried out using high speed camera and Malvern system. The density ratios of ambient gas to diesel fuel were varied using $N_2$ and Ar gas in the case of 14.9, 21.2, 28.4, 35.1, 40.4, and 50.1. With the increase of gas density ratio, the radial penetration is decreased due to the resistance of the ambient gas. With the increase of the gas density ratio and the distance between nozzle tip and flat plate, the height of spray is increased due to the entrance and circulation. With the increase of gas density ratio, SMD is decreased on the nearby position at the center of flat plate, but SMD is increased on the far position. As the distance between nozzle tip and flat plate is increased, SMD is always decreased.

• 설비공학논문집
• /
• 제14권12호
• /
• pp.1014-1022
• /
• 2002

This paper analyzed the characteristics of heat transfer in quadangle duct with absorber plate by solar radiation. Effects o( Reynolds number on increasing temperature at outlet for variation of absorber plate temperature were analyzed by using numerical analysis technique. And also the effects of turbulent intensity of inlet flow on increasing temperature at outlet for various duct height and effects of inlet aspect ratio of quadrangle duct and position of heating surface on the outlet temperature were analysed. As the results, Outlet temperature was greatly influenced in low Reynolds number. And the highest outlet temperature distribution appeared on the inlet aspect ratio 2 because of the buoyancy effect.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.145-148
• /
• 2005

Recently the construction of high-rise reinforced concrete building is progressively increased as the social demands. It is significantly important factors such as economy, the safety of structure, and the flexibility of internal space. Therefore new structural system is also required to be attained the reduction of story height, the flexibility and efficient use of space. The most suitable structural system is with the economy and flexibility, flat plate slab system in high-rise reinforced concrete building. In this research, it was focused in the improvement of shear performance in the flat plate system using high ductile fiber reinforced mortar. It was evaluated the shear performance in the critical region of slab-column connection. The flat plate system, designed by the high performance and safety, was developed as a new technique in the application of high-rise R/C building.