• International Journal of Concrete Structures and Materials
• /
• 제9권2호
• /
• pp.133-143
• /
• 2015

This paper describes the test results and nonlinear analysis of reinforced concrete T-beams strengthened by bonded steel plates under increasing static loading conditions. The first part of this paper discusses the flexural tests on five T-beams, including the test model design (based on similarity principles), test programs, and test procedure. The second part discusses the nonlinear numerical analysis of the strengthened beams, in which a concrete damage plasticity model and a cohesive behavior were adopted. The numerical analysis results are compared with experimental data and show good agreement. The area of bonded steel plate and the anchor bolt spacing were found to have an impact on the cracking load, yield load, and ultimate load. An increase in the area of steel plate and a reduction of the anchor spacing could significantly improve the cracking and ultimate loads and decrease the damage of the beam.

• 한국지반공학회지:지반
• /
• 제8권3호
• /
• pp.5-12
• /
• 1992

본 논문은 모래지반에 박힌, 기하학적 특성과 설치방법이 서로 다른 모형말뚝의 극한상장지지력에 대한 연구이다. 기하학적 특성의 측면으로는 균일직편말뚝, 선단확대말뚝, 다층확대말뚝과 앵커플레이트가 시험되고 기일직경말뚝에 대한 말뚝설치방법이 극한지지력에 미치는 영향을 조사하기 위해 매설, ao입, 진동관입방법이 연구되었다. 실험결과에 의하면 기초가 상장력과 압축력을 받는 경우에는 선단확대 말뚝이, 오직 상장력에 대해서는 앵커플레이트가 가장 효과적이며, 또한 말뚝설치방법 및 타입 말뚝의 선단 모양은 상장지지목에 큰 영향을 준다는 것이 밝혀졌다.

• 한국안전학회지
• /
• 제27권6호
• /
• pp.84-92
• /
• 2012

Anchorage zone in prestressed concrete cable stayed bridges is very important area due to the more accurate analysis is needed to estimate the behavior. In the study, since the cable anchorage zone in the prestressed concrete cable-stayed bridge is subject to a large amount of concentrated tendon forces, it shows very complicated stress distributions and causes a serious local cracks. Accordingly, It is necessary to investigate the parameters of affecting the stress properties, such as the cable inclination, the position of anchor plate, the modeling method and the three dimensional effect. The tensile stress distribution of anchorage zone is compared to the actual design condition by varing the stiffness of spring element in the local modeling and an appropriate position of anchor plate is determined. These results would be elementary data to the stress state of anchorage zone and more efficient design.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.565-580
• /
• 2006

Set in constant increase and period current of lively technical development of railroad use and construction of cable stayed bridge railway bridge, one of bridge form of most suitable that think side police officer and the material enemy of bridge that use long rail, is increasing laying stress on the foreign countries. Main tower fixing department of this cable stayed bridge is consisted of main tower flange that support bearing plate, bay ring plate bearing plate, support end rib and diaphragm etc, as stress transmission mechanic that tensility of cable socket into normal force of main tower, and is used this time. These structural elements is very complex the structure and direction of load delivered from socket specially calbe particularly be different, and need FEM analysis that use Thick Shell element for suitable arrangement of mutual stress flowing grasping and absence that follow hereupon because all of the each support plate angle that suport this differ.

• 한국안전학회지
• /
• 제16권2호
• /
• pp.97-102
• /
• 2001

Anchors are often used in construction of foundations such as transmission towers to resist uplifting forces. When plate anchors are embedded in soft clay, they may undergo a deformation under the pressure of sustained load. In soft saturated clays, the suction force can be a large par of the ultimate uplift capacity. This study is to present recent laboratory model test results conducted to evaluate the nature of variation of the suction force for plate anchors with shear strength and embedment ratio. The ratio of F$_{s}$Q$_{n}$ versus H/D in bentonite decreases with the increase of the embedment ratio.o.o.

• 한국구조물진단유지관리공학회 논문집
• /
• 제20권6호
• /
• pp.73-83
• /
• 2016

포스트텐션 공법을 적용한 콘크리트 부재의 정착구역에서 정착판 근처의 지압응력은 일반적으로 높은 프리스트레스 하중에 의해 발생한다. 따라서 단면의 효율적인 활용과 콘크리트 부재의 파괴로 이어질 수 있는 균열제어를 위해 적절한 정착판의 크기가 제시되어야 한다. 본 연구에서는 도로교설계기준 및 PTI 등에 의해 사각형 정착판과 원형 정착판의 유효면적에 대한 관계식을 제안하였다. 또한 정착판의 형상에 따라 형상계수를 제안하였으며, 유한요소해석을 통해 적절성을 분석하였다.

• 한국농촌건축학회논문집
• /
• 제7권1호
• /
• pp.121-128
• /
• 2005

This experimental study was conducted to investigate beam strengthening of RC buildings with expended steel plate(ESP) in rural area. Nine test specimens were manufactured, whose variables were tensile steel ratio and the amount and the shape of expanded steel plate. The test results indicated that strengthened beams with ESP showed the improvement of flexural strength of 50%~90%, and the beam strengthening of U type was excellent for shear reinforcement as well as flexural reinforcement, more over, the honeycomb shape of ESP and anchor bolts for development of ESP were very effective.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.501-507
• /
• 1996

The final objectives of this study are to present the theoretical formula for reasonable structural analysis and practical codes on the repair/strengthening of damaged reinforced concrete structrues. For that purpose, in last year, preliminary experiments for flexure and shear of beam structure using carbon sheet and steel plate were performed, and in sequence, in this year, using aramid fiber sheet and steel plate more extensive experiment were performed. Repair for the performance of flexure and shear was focused on, and main variables were selected considering aplicablilty for practical field, such as, spacing of anchor bolt, lapping, jacking up, preloading level, and fiber difection as well as length of repairing plate and thickness. so new results from various angles are to be presented.

• 기술사
• /
• 제15권4호
• /
• pp.12-24
• /
• 1982

East Parts of Bangladesh have been benifited by low cost energy generated by domestic natural gas but West parts where energy generated by imported fuel. Bangladesh Government authority has very much concerned to transmit the low cost electricity to the West from the East for past several years. To solve such concerns, cross-country 230kv double circuits Power transmission line was proposed, however there was a big obstacle for the realization of this line to cross the Jamuna river which has 12 km long width with a deep muddy river bed. A consultant engineering firm named Merz-Mclellan anyway finalized this plan and a world-wide bid was announced on June 31, 1979. Due to the expected difficulty to construct the towers on sea like area, only three construction groups have participated. including a Korean joint venture organization of Samsung-Korean Developement corporation-Kolon Electric Machinery company. After 3 months bid evaluation, contract was awarded to Korean Consosium and KEM Co was in charge of designing steel towers with anchor bolts and base plates beside to electrical engineering field. Then KEM Co have faced and over-comed many unenpected technical difficulties such as forced eccentricity joint on base plate, distorsion issue of 60mm thick plates welding, threading anchor bolts, tad heat treatment of some anchor bolts, disagreement from Consultant Engineer on multiplying factor of leg stresses for 45$^{\circ}$ wind and on reducing O.L.F for wind loads on cables for such 1220km long spans. After spending two years long period for designing and engineering towers, base plates, and anchor bolts, first shipment of tower was finally realized on Nov. 8, 1981 and on the other hand KDD has proceeded concrete caisson work on schedule at Jamuna river site and expected to complete tower erection and stringing of cables within this year of 1982 which was original completion target.

• 한국지반공학회논문집
• /
• 제22권3호
• /
• pp.37-43
• /
• 2006

이 연구는 선박을 정착하기 위하여, 해성점토에 관입된 앵커 및 닻줄의 변형, 인장력 및 지반거동을 해석할 수 있는 방법에 대한 연구로써, 앵커와 닻줄을 multi-segment로 나누어, 일차원 유한 요소 해석을 하였다. 각 element와 지반거동에 대한 힘과 모멘트의 평형조건을 만족시키면서, 앵커와 닻줄의 변형과 인장력을 해석하는 방법으로, 앵커 및 선박 상판에서 구할 수 있는 특정경계조건을 구한 후, 지속적인 반복작업을 이용하여 각 element의 변형과 인장력을 구하는 방법을 채택하였다. 이러한 연구결과는 앵커 및 닻줄이 사용된 해양구조물의 설계 및 시공에 반영될 수 있으며, 이 연구의 예측결과는 실제 현장 건ta와 비교 분석되었으며, 비교를 위한 항목으로는 anchor의 지지력, 닻줄길이, 선박에 연결된 닻줄의 각도 및 인장력 등이 사용되었다. 각 항목의 비교결과, 실제 현장 data와 상당히 일치하여, 이 방법으로 지반 및 선체의 거동을 예측할 수 있다는 것이 증명되었다.