• The Korean Journal of Mycology
• /
• v.35 no.2
• /
• pp.115-120
• /
• 2007

Powdery mildew caused by Podosphaera fusca is one of the most important diseases in leafy lettuce (Lactuca sativa L.). Since the disease has been a threat to safe cultivation of leafy lettuce, its control methods have to develop to produce good quality of lettuce for farmer and consumer. Occurrence of lettuce powdery mildew is increasing more and more due to continuous cultivation of lettuce all through the year, non-removal of diseased plant parts of lettuce, spray of inadequate fungicides by mistaken acknowledge of lettuce powdery mildew for lettuce downy mildew, etc. The control effect of five fungicides against lettuce powdery mildew was examined in a plastic greenhouse located in Suwon. When fungicides were sprayed three times at 10 days-intervals in the early stage of occurrence of powdery mildew, the incidence of powdery mildew in the plants treated with kresoxim-methy SC, azoxystrobin SC, Ampelomyces quisqualis AQ94013 WP, Paenibacillus polymyxa AC-1 SC and Bacillus subtilis Y 1336 WP was 0.7%, 0.7%, 26.0%, 36.7% and 42.0%, respectively, whereas the incidence of non-treated control was 55.3% on eight days after final application. Phytotoxicity of five fungicides tested was not observed in lettuce seedling plants.

• The Journal of Society for e-Business Studies
• /
• v.21 no.3
• /
• pp.79-99
• /
• 2016

Supply network of automobile part is addressed with the e-invoices generated at real time. Automobile is composed of 8 modules. Firms which produce these modules are defined as the first outsourcing firm. Brake is the part of power control module and so, brake manufacturing firm is called the second outsourcing firm. In this paper, the third supply networks of brake manufacturing firms is analyzed with e-invoices and social network method. At the node-level, the third outsourcing firms are classified into 3 categories, interator, allocator and hub with respect to their role at the ego-network of each brake manufacturing firm. At the network level, A2, one of 3 brake manufacturing firms have more outsourcing firms and bigger centrality than the other brake manufacturing firms. Intre-firms trade patterns are, also, analyzed by using the degree of trade dedication with respect to the modes of business. It is shown that trade pattern of retail, commodity brokerage firm, rubber and plastic manufacturing firm are hierarchical trade because their degree of trade dedication is almost near to 1.

• Korean Journal of Plant Resources
• /
• v.19 no.5
• /
• pp.580-585
• /
• 2006

This experiment was conducted to study the effects of sulphuric acid, cutting, cold stratification and hot water on the germination of Sophora japonica seeds, which have difficulty to germinate because they have hard and thick seed coats. The seeds were immersed in 30, 60 and 90% sulphuric acid for 30 minutes as seed scarifications, and cut 1/8, 2/8 and 3/8 of the opposite parts of radicles. As cold stratification the seeds were wrapped in wet towel, and then stored in plastic bags in a refrigerator $(4^{\circ}C)$ for 3, 5 and 10 days. The seeds were immersed in hot water $(90{\sim}95^{\circ}C)$ for 2,5 and 10 minutes. Pretreated seeds represented different germination properties, respectively. After sulphuric acid treatment, the seeds showed an increase in germination (G) and germination index (GI). Compared to the other treatments, 90% sulphuric acid showed the highest G (31.7%) and GI (6.2). The G and GI of cut seeds decreased with the increase of seed cutting lengths. And G and GI of cold stratificated seeds were not significantly different among the days treated (p=0.258). Two minutes treatment of hot water showed lower G and Gl than control, and the seeds were not germinated in 5 and 10 minutes treatments of hot water. At the result of relative growth rate and T/R ratio of seedlings from pretreated seeds, the seedlings from seeds in 90% sulphuric acid treatment represented the highest relative growth rate and T/R ratio.

• Korean journal of applied entomology
• /
• v.21 no.3 s.52
• /
• pp.153-158
• /
• 1982

The study was conducted to obtain the basic information on the diseases epidemics of vegetable crops grown in Namji, Jinju, Gimhae and Suncheon under the extremely varied and specified conditions, plastic film house. The disease survey was conducted from the end of April, 1951 to April 1982. Leaf mold and late blight were serious foliar disease in tomato during the seedling stage, especially when the infected seeds were sown. The diseases increased rapidly 35 days after seeding. In both continuous cultivation of cucumber and rotation with upland crops, incidence of Fusarium wilt was severe while incidence of the disease was negligible in cultivations after paddy rice or grafting on pumpkin. Downy mildew of cucumber was severe in Jinju and Suncheon area, however, it was not so serious in Namji area where the growing season of cucumber was unfavorable for the maximum disease incidence. Cucumber mosaic virus disease was prevalent in the areas surveyed and the disease incidence was increased rapidly after June. Powdery mildew prevailed at the early stage of cucumber growth after transplanting in Namji area. Root rot and wilting caused by Phytophthora capsici was as the most destructive disease in pepper grown under the vinyl house, especially in Namji and Jinju area where the pepper has been cultivated intensively. The Phytophthora attacked most parts of young plants during the winter time and then induced crown rot on the adults plants. Cultivation of pepper in vinyl house was almost impossible because of the Phytophora disease by the end of June. Virus diseases to tomato plants were prevalent throughout the surveyed area and the damage was also severe. In Jinju and Gimhae area leaf mold and late blight showed high infection rate in tomato during the harvest time.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.13 no.4
• /
• pp.1-13
• /
• 2009

Liquefaction is a significant threat to structures on loose saturated sandy soil deposits in the event of an earthquake, and can often cause catastrophic damage, economic loss, and loss of life. Nevertheless, the Korean peninsula has for a long time been recognized as a safe region with respect to the hazard of liquefaction, as the peninsula is located in a moderate seismicity region, and there have been no reports of liquefaction, with the exception of references in some historical documents. However, some earthquakes that have recently occurred in different parts of the world have led to liquefaction in non-plastic silty soils, a soil type that can be found in many of the western coastal areas of Korea. In this study, we first present procedures for evaluating the liquefaction potential, and calculate the liquefaction potential index (LPI) distribution at two western coastal sites using both piezocone penetration test (CPTu) data and standard penetration test (SPT) data. The LPI is computed by integrating liquefaction potential over a depth of 20m, and provides an estimate of liquefaction-related surface damage. In addition, we compared the LPI values obtained from CPTu and SPT, respectively. Our research found that the CRR values from CPTu were lower than those from the SPT, particularly in the range between 40 and 120 for the corrected tip resistance, (qc1N)CS, from the CPTu, or in the range of CRR less than 0.23, resulting in relatively high LPI values. Moreover, it was observed that the differences in the CRR between the two methods were relatively higher for soils with high fine contents.

• Journal of Life Science
• /
• v.16 no.7 s.80
• /
• pp.1158-1163
• /
• 2006

Bisphenol A (BPA), 2,2-bis(4-hydroxyphenyl) propane, has been widely used as a monomer for production of epoxy resins and polycarbonate plastics, and final products of BPA include adhesives, protective coatings, paints, optical lens, building materials, compact disks and other electrical parts. Since BPA is a toxic chemical to elicit acute cell cytotoxicity and chronic endocrine disrupting activity, the degradation of BPA has been focused during last decades. To overcome the problem of photo-, and chemical-degradation of BPA, in this study, a bacterium that is able to biodegrade BPA, was isolated. The bacterium, isolated froln the soil of plastic factory, was identified as Acinetobacter calcoaceticus (strain BP-2) based on physiological and 16S rDNA sequencing analysis. A. calcoaceticus BP-2 was able to grow in the presence of $1140{\mu}g\;ml^{-1}$ BPA. Biodegradation experiments showed that BP-2 mineralized BPA via 4-hydroxybenzoic acid and 4-hydroxyacetophenone, and average degradation rate was $53.3{\mu}g\;ml^{-1}\;day^{-1}$ under optimal conditions (pH 7 and $30^{\circ}C$). In high density resting cell $(3.5g-dcw.1^{-1})$ experiments, the maximal degradation rate was increased to $89.7{\mu}g\;ml^{-1}\;h^{-1}$. Our results suggest that BP-2 has high potential as a catalyst for practical BPA bioremediation.

• Environmental and Resource Economics Review
• /
• v.18 no.4
• /
• pp.653-693
• /
• 2009

Using the Korean environmental input output analysis, this paper provides the emission intensities of the chemicals, especially, the toxic and carcinogenic substances, by linking the structure of demand, and the policy mix to abate these substances emissions. Acording to the results, Industries with the highest total emission intensities(TEI) of toxic substances are ranked : Printing and reproduction of recorded media(21), Other transportation equipment(26), Pulp and paper(11), Leather and fur products(9), Fiber yarn and fabrics(7). And the highest TEI of carcinogenic substances are Wood and wooden products(10), Motor vehicles and parts(25), Plastic and rubber products(15), Audio, video and communications equipment(23), etc.. The economic factors of changing these emissions are emission intensities and final demands. The effective combinations of policy instruments to abate these emissions are varied by the industries and substances. For example, Government need to execute the effective TEI management in the Fiber yarn and fabrics(7) sector, and, in furniture(27) sector, the reduction of final demand is more effective.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.378-385
• /
• 2017

This study investigated the design of a snap fit, which is widely used for fastening plastic parts. We analyzed the assembly mechanism of a lock snapfit, measured the assembly force and separation force based on the design of experiments, and derived a regression equation through an analysis of variance. The response surface methodology was also used. Polybutylene terephthalate was used to fabricate specimens, and the assembly force and separation force were measured using a micro-tensile tester. The length, width, thickness, and interference were considered as factors. A second-order regression model was used to derive the regression equation. The assembly force decreased with increasing length and width, but it increased with increasing thickness and interference. The finite element method was used to analyze the assembly mechanics. The width decreased the assembly force by increasing the ductility. The influences of the factors for low assembly force and high release force were shown to be opposite to each other. It was necessary to design a structure that minimized the assembly force while maintaining an appropriate level of separation force.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.15-22
• /
• 2009

This study was conducted to examine characteristics of rhizome growth and flowering of white lotus (Nelumbo nucifera) plant in Muan Hoesan-lake for collecting the basic data on the cultivation and the flowering which is growing in Muan Hoesan-lake of Jeonnam province in Korea. We have planted from the seeds and the enlarged rhizomes of the white lotus which were planted in the plastic containers on April 20 and May 4, 2008, and cultivated under rain shelter condition. Rhizome growth pattern and the flowering characteristics of the white lotus were examined on September 4, 2008. Main rhizomes of the white lotus propagated by the seeds and the enlarged rhizomes were branched by 10% and 15%, respectively. Numbers of nodes in the bloomed and non-bloomed rhizomes of the white lotus were over 14 and below 11, respectively. Flower was not observed in the white lotus when propagated with seeds, however, flowers came out up to 80% by the enlarged rhizomes. First flowers were bloomed from the late July and to the early August, and the number of flowers were 4.0~4.4. The first flower stalks without branching of the main rhizome were emerged in 8.8th node, however, that with branching were 8.0th node. Time to flowering from the emergence of flower stalk on the above-ground parts were required 16 days. White flowers from the lotus were 15.3 cm in height and 28.2 cm in width, their longevity was 3.3 days and the averaged flower fresh weight was 29.2 g. The results conclude that optimum number of nodes on the main rhizomes for blooming the white lotus flowers should be over 8 nodes before the rhizome enlargement.

• Composites Research
• /
• v.34 no.5
• /
• pp.290-295
• /
• 2021

The application of lightweight structural composites to automobiles as a solution in line with global fuel economy regulations to curb global warming is recognized as a megatrend. This study was conducted to provide a technical approach that can respond to the issue of replacing parts that require conductive properties to maximize the application of thermoplastic carbon fiber reinforced plastics (CFRPs), which are advantageous in terms of repair, disposal and recycling. By utilizing the properties of the low-viscosity polymerizable oligomer matrix, it was possible to prepare a thermoplastic CFRP exhibiting excellent impregnation properties while uniformly mixing the conductive filler. Various carbon-based conductive fillers such as carbon black, carbon nanotubes, graphene nanoplatelets, graphite, and pitch-based carbon fibers were filled up to the maximum content, and electrical and thermal conductive properties of the fabricated composites were compared and studied. It was confirmed that the maximum incorporation of filler was the most important factor to control the conductive properties of the composites rather than the type or shape of the conductive carbon filler. Experimental results were observed in which it might be advantageous to apply a one-dimensional conductive carbon filler to improve electrical conductivity, whereas it might be advantageous to apply a two-dimensional conductive carbon filler to improve thermal conductivity. The results of this study can provide potential insight into the optimization of structural design for controlling the conductive properties of thermoplastic CFRPs.