• 한국해양공학회지
• /
• 제34권1호
• /
• pp.37-45
• /
• 2020

Unstiffened and stiffened cylindrically curved plates are often used in ship structures. For example, they can be found on a deck with a camber, a side shell at the fore and aft parts, and the circular bilge part of a ship structure. It is believed that such cylindrically curved plates can be fundamentally modelled using a portion of a circular cylinder. From estimations using cylindrically curved plate models, it is known that the curvature generally increases the buckling strength compared to a flat plate under axial compression. The existence of curvature is also expected to increase both the ultimate and buckling strengths. In the present study, a series of finite element analyses were conducted on stiffened curved plates with several varying parameters such as the curvature, panel slenderness ratio, and web height and type of stiffener applied. The results of numerical calculations on stiffened and unstiffened curved plates were examined to clarify the influences of such parameters on the characteristics of their buckling/plastic collapse behavior and strength under an axial compression.

• 한국가정과교육학회지
• /
• 제14권1호
• /
• pp.55-73
• /
• 2002

The purpose of this study was to investigate the body cathexis and appearance management behaviors of the high school girls according to their demographic, physical, psychological. and school related variables. Data was obtained from 378 high school girls in Jeonju City by self-administered questionnaires from March to April. 2001. The results of this study were; 1. Body cathexis of high school twirls was relatively low, face and upper body cathexis were higher than other body parts. but lower-body and total body cathexis were low. 2. Body cathexis of high school twirls was in exact proportion to their parents' educational level total household income. and monthly pocket money. And it was higher in case of tall. light. external personality. higher self-esteem, art or physical high school girls. and the vocational high school twirls. with good academic records. and popular among friends. 3. High school girls showed higher appearance management behaviors such as bath, skin care. hair care. but they did risky appearance management behaviors such as drug use. diet. plastic cosmetic a tittle. The students in case of mother's higher educational level. more monthly income of household, more pocket money. external personalities. lower self-esteem, art or physical high school girls and the vocational high school girls, with good academic records, popular among friends showed higher appearance management behaviors .

• 한국환경과학회지
• /
• 제25권3호
• /
• pp.337-343
• /
• 2016

The present study aimed to determine the influence of various root restriction media on seedling quality and early growth of strawberry after transplanting. The root activity of the seedlings, measured 20 days after fixation, was considerably higher (0.096, 0.090, and $0.063mg{\cdot}g^{-1}{\cdot}h^{-1}$ at 420, 450, and 480 nm, respectively) in expanded rice hull (ERH) treatment than in the sandy loam and loamy sand treatments. The volumetric water content (VWC) of the root media tested across 3 irrigation regimes (15 d, 30 d, 45 d) in the nursery field was highest in sandy loam (65.0-66.8%), followed by 59.4-61.3% in loamy sand and 38.6-45.3% in ERH. When growth parameters of runner plantlets were compared, ERH treatment was found to result in the highest crown thickness and fresh weights of root and above-ground parts. This had a favorable influence on above-ground tissue growth after transplanting to plastic house soil. As mentioned above, ERH treatment resulted in the highest seedling quality and early growth after transplanting. The results of this study would serve as useful on-site data for the production of high-quality strawberry seedlings.

• 치과방사선
• /
• 제21권1호
• /
• pp.119-125
• /
• 1991

In the study of magnification of image in the focal trough of panoramic radiography, (Yoshida company Panoura - Eight - s), a series of 63 x-ray films were taken with the 8-19 metal pins placed in the holes of the plastic plate, measured and evaluated by 4 observes. The author analyzed the vertical and horizontal magnification rate in the corrected focal trough. Results were as follows: 1. For vertial measurements, magnification rates were minimum 10% maximum 36% and the magnification for image of medial side was larger than that of image of lateral side from image layer. 2. For horizontal measurements, magnification rates were minimum-14% maximum 46% and images of medial side from focal trough were magnified and images of lateral side from focal trough were retrenched. 3. When moved 10㎜ downward occlusal layer, interspace was somewhat narrow between the pins and upper sides of pins were horizontally magnified but images of the end parts of pins showed tapered form. 4. When moved 10㎜ downward from the occlusal layer, opposite images showed overlapping.

• 대한기계학회논문집A
• /
• 제20권10호
• /
• pp.3031-3037
• /
• 1996

In cold forming processes, due to high working pressure action on the die surface, failure mechanics must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. Die wear affects the tolerances of formed parts, metal flow and costs of process etc. The only way to control these failures into devlop methods which allow prediction of die wear and which are suited to be used in the design state in order to optimize the process. In this paper, the forming propcesses that involve cold forward extrusion and wire drawing were simulated by rigid plastic finite element method and its output were used for predicting die wear by Archard wear model. The simulation results were compared with the measured worn dies.

• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.24-29
• /
• 2017

In this study, a seat cross member was fabricated by optimizing the resin transfer molding processing of CFRP (Carbon Fiber Reinforced Plastics) materials. This seat cross member is used in automotive underbody parts and provides side impact support. The seat cross was manufactured via vacuum resin transfer molding. The process included 1min of resin injection, 8 mins of heating, and 1 min of cooling, for a total molding time of 10mins. Tensile test results showed an average breaking load of 21.50kN, a tensile strength of 404 MPa, and an elastic modulus of 46.2 GPa. As a result, the CFRP seat cross provides the same strength as a similar steel part, but weighs 42% less.

• 대한기계학회논문집A
• /
• 제33권12호
• /
• pp.1471-1481
• /
• 2009

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. The sleeve spring type damper is one of the preventive measures for reducing the torsional vibration. In this study, the closed form equations to predict the spring constant of a sleeve spring and the torsional characteristics of the torsional vibration damper are proposed to calculate stiffness of the damper and verified their availability through the finite element analysis and experiments. And the stability of the sleeve spring torsional vibration damper is verified by analyzing the inner star and outer star, which are the core parts of the damper, and 2-roll bending process is proposed to manufacture sleeve spring. The program to calculate the initial radius including spring-back effect is developed, and the FEA method to analyze elasto-plastic problem was verified through analysis of 90$^{\circ}$bending process. The results of the analysis are in good agreements with those of the experiments. The newly proposed method can be used as an advanced technique that remarkably curtails cost of production and replaces the conventional forming.

• 한국방사선학회논문지
• /
• 제9권5호
• /
• pp.301-306
• /
• 2015

엑스선을 이용하면 다양한 종류의 시료에 대한 투영 영상을 얻을 수 있다. 시료가 저밀도 및 고밀도의 복합 물질로 구성되어 있는 경우는 단일 관전압 엑스선을 이용해서 두 물질을 모두 대조도가 높도록 영상화하기 어렵다. 저관전압과 고관전압을 이용하여 영상을 획득하고 영상처리하면 밀도의 차이가 큰 물질을 영상화하기에 용이하다. 크기가 작은 전자부품을 저관전압과 고관전압에서 영상을 획득하여 visual C++을 이용하여 픽셀-픽셀 영상 합성을 통하여 전자부품의 합성수지부분과 금속부분을 동시에 영상화하여 전자부품의 검사 및 관찰의 가능성을 검증하였다.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.509-515
• /
• 2015

Recent trends to reduce the size of mobile electronics products have driven miniaturization of various components, including screw parts for assembling components. Considering that the size reduction of screws may degenerate their joining capabilities, the size reduction should not be limited to the thread region but should be extended to its head region. The screw head is usually manufactured by forging in which a profiled punch presses a billet so that plastic deformation occurs to form the desired shape. In this study, finite element (FE) analysis was performed to simulate the forging process of a subminiature screw; a screw head of 1.7 mm diameter is formed out of a 0.82 mm diameter billet. The FE analysis result indicates that this severe forging condition leads to a generation of folding defects. FE analyses were further performed to find appropriate punch design parameters that minimize the amount of folding defects.

• The Plant Pathology Journal
• /
• 제15권6호
• /
• pp.345-347
• /
• 1999

A scab disease on eggplant (Solanum melongena L. cv. Chukyang) in plastic film houses around Kimhae area in Korea during the winter season of 0998-1999. The disease started on leaves with small dark brown spots which were gradually expanded to 1 to 3 mm diameter lesions. Later, the central parts of the lesions became collapsed and detached to make holes. Dark brown mold was grown out of the lesions on the lower side of leaf. Numerous conidia were produced on the lower side of leaf. Numerous conidia were produced on the diseased leaves and appeared to be readily dispersed in the air. A fungus was isolated from the diseased leaves, and tested for Koch's postulates to prove the causal agent of the desease. The isolated fungus grew on potato dextrose agar, forming greenish black to pale brown colonies. Conidia were ellipsoidal, fusiform or subspherical, mostly one-celled but occasionally septated, and formed in long branched chains on the erected conidiophores which were pale olevaceous brown and variable in length between 12.4 and $393.4\mu\textrm{g}$. The fungus was identified as Cladosporium cucumerinum Ellis Arthur based on the above morphological characteristics examined. The optimum temperature for mycelial growth and conidial formation was about 20 to $25^{\circ}$. In addition to cucumber, the fungus was also pathogenic to watermelon, pumpkin and oriental melon. This is the first report on the scab disease of eggplant in Korea.