Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Process Analysis and Test for Manufacturing the Sleeve Spring Type-Torsional Vibration Damper

슬리브 스프링 형식 비틀림 진동감쇠기 제조를 위한 공정해석 및 시험

  • 황범철 (부산대학교 기계기술연구원) ;
  • 배원병 (부산대학교 기계공학부) ;
  • 장영준 (부산대학교 기계공학부) ;
  • 김철 (부산대학교 기계기술연구원)
  • Published : 2009.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. The sleeve spring type damper is one of the preventive measures for reducing the torsional vibration. In this study, the closed form equations to predict the spring constant of a sleeve spring and the torsional characteristics of the torsional vibration damper are proposed to calculate stiffness of the damper and verified their availability through the finite element analysis and experiments. And the stability of the sleeve spring torsional vibration damper is verified by analyzing the inner star and outer star, which are the core parts of the damper, and 2-roll bending process is proposed to manufacture sleeve spring. The program to calculate the initial radius including spring-back effect is developed, and the FEA method to analyze elasto-plastic problem was verified through analysis of 90$^{\circ}$bending process. The results of the analysis are in good agreements with those of the experiments. The newly proposed method can be used as an advanced technique that remarkably curtails cost of production and replaces the conventional forming.

Keywords

References

  1. Hwang, B. C., Kim, C. and Bae, W. B., 2009, "A Study of Structural Analysis and Torsional Characteristic of the Sleeve Spring Type-Torsional Vibration Damper," Korean Society for Precision Engineering, Vol. 26, No. 2, pp. 94~100
  2. Yang, M. and Shima, S., 1998, "Simulation of Pyramid Type Three-roll Bending Process," International Journal of Mechanical Sciences, Vol. 30, No. 12, pp. 877~886 https://doi.org/10.1016/0020-7403(88)90071-9
  3. Yang, G., Mori, K. and Osakada, K., 1994, "Determination of Forming Path in Three-Roll Bending Using FEM Simulation and Fuzzy Reasoning," Journal of Material Processing Technology, Vol. 45, pp. 161~166 https://doi.org/10.1016/0924-0136(94)90335-2
  4. Hu, W. and Wang, Z. R., 2001, "Theoretical Analysis and Experimental Study to Support the Development of a More Valuable Roll-bending Process," International Journal of Machine Tools and Manufacture, Vol. 41, pp. 731~747 https://doi.org/10.1016/S0890-6955(00)00090-0
  5. Zeng, J., Liu, Z. and Champliaud, H., 2008, "FEM Dynamic Simulation and Analysis of the Roll-Bending Process for Forming a Conical Tube," Journal of Material Processing Technology, Vol. 198, pp. 330~343 https://doi.org/10.1016/j.jmatprotec.2007.07.016
  6. Shin, J. G., Lee, J. H., Kim, Y. I. and Yim, H. J., 2001, "Mechanics-Based Determination of the Center Roller Displacement in Three-Roll Bending For Smoothly Curved Rectangular Plates," KSME International Journal, Vol. 15, No. 12, pp. 1655~1663
  7. Hua, M., Sansome, D. H., Rao, K. P. and Baines, K., 1994, "Continuous Four-roll Plate Bending Process: Its Bending Mechanism and Influential Parameters," Journal of Material Processing Technology, Vol. 45, pp. 181~186 https://doi.org/10.1016/0924-0136(94)90338-7
  8. Hua, M., Baines, K. and Cole, I. M., 1995, "Bending Mechanisms, Experimental Techniques and Preliminary Tests for the Continuous Four-Roll Plate Bending Process," Journal of Material Processing Technology, Vol. 48, pp. 159~172 https://doi.org/10.1016/0924-0136(94)01647-J
  9. Hua, M., Cole, I. M., Baines, K. and Rao, K. P., 1997, "A Formulation for Determining the Single-pass Mechanics of the Continuous Four-roll Thin Plate Bending Process," Journal of Material Processing Technology, Vol. 67, pp. 189~194 https://doi.org/10.1016/S0924-0136(96)02842-7
  10. Hua, M. and Lin, Y. H., 1999, "Large Deflection Analysis of Elastoplastic Plate in Steday Continuous Four-Roll Bending Process," International Journal of Mechanical Sciences, Vol. 41, pp. 1461~1483 https://doi.org/10.1016/S0020-7403(98)00104-0
  11. Hua, M. and Lin, Y. H., 1999, "Effect of Strain Hardening on the Continuous Four-roll Plate Edge Bending Process," Journal of Material Processing Technology, Vol. 89-90, pp. 12~18 https://doi.org/10.1016/S0924-0136(99)00010-2
  12. Lin, Y. H. and Hua, M., 2000, "Influence of strain hardening on Continuous Plate Roll-bending Process," International Journal of Non-linear Mechanics, Vol. 35, pp. 883~896 https://doi.org/10.1016/S0020-7462(99)00065-7
  13. Hua, M., Baines, K. and Cole, I. M., 1999, "Continuous Four-Roll Plate Bending: a Production Process for the Manufacture of Single Seamed Tubes of Large and Medium Diameters," International Journal of Machine Tools and Manufacture, Vol. 39, pp. 905~935 https://doi.org/10.1016/S0890-6955(98)00075-3
  14. Lange, K., 1985, "Handbook of Metal Forming," McGraw-Hill, pp. 19.3~19.7
  15. Mielnik, E. M., 1991, "Metalworking Science Engineering," McGraw-Hill, pp. 731~734
  16. Chung, W. J., 1999, "A Finite Element Analysis of Springback in Sheet Metal Forming," KSME Journal, Vol. 23, No. 12, pp. 2197~2208
  17. An, J. H., Ko, D. C., Lee, C. J. and Kim, B. M., 2008, "Springback Compensation of Sheet Metal Bending Process Based on DOE & ANN," KSME Journal, Vol. 32, No. 11, pp. 990~996 https://doi.org/10.3795/KSME-A.2008.32.11.990