• 농업과학연구
• /
• 제49권4호
• /
• pp.697-706
• /
• 2022

The effect of varied light intensities on the growth of daughter plants during propagation and after transplant to raised beds were examined in 'Sulhyang' strawberry. To this end, four treatments in controlling solar radiation inside a plastic house were made: 55% retractable shading and 35, 55, and 75% fixed shading. The plastic house was shaded only from 11:00 to 16:00 in June and 10:00 to 16:00 in July to September for the treatment of 55% retractable shading. The mean solar radiation inside the plastic house in the retractable 55% shading treatment was 317 W·m^-2 and those in the 35, 55, and 75% fixed shading treatments were 183, 165, and 116 W·m^-2, respectively, at 10 o'clock in the morning. The 55% and 75% fixed shading resulted in taller daughter plants with wider leaf areas than 55% retractable shading. The retractable shading also showed higher leaf numbers, crown diameters, root weights, and fresh weights compared to fixed shading treatments. Regarding the inorganic element contents, daughter plants grown under 75% fixed shading had 1.35% total nitrogen content followed by 1.19% in 35% fixed shading, 1.14% in 55% fixed shading, 1.14% in open culture, and 1.10% in 55% fixed shading. After 54 days following the transplant of daughter plants to a raised bed, the fresh weight of the aboveground part was the heaviest in the 55% retractable shading and non-shading treatments. The 75% fixed shading treatment had the lowest fresh weight of the aboveground plant parts. The results of this study could be used for the production of high-quality daughter strawberry plants.

• 한국산학기술학회논문지
• /
• 제15권4호
• /
• pp.1807-1812
• /
• 2014

플라스틱은 형상의 구애를 거의 받지 않아 자유 곡면형상을 표현할 수 있고, 다양한 색상과 저렴한 가격으로 대량으로 생산할 수 있는 장점을 가지고 있으며, 차량의 경량화 부품소재로 많이 사용되고 있는 가운데 자동차 도어필러 성형은 엔지니어링 플라스틱을 사용하는 대표적인 예로서, 사출성형으로 생산되고 있다. 이러한 방법으로 생산된 부품은 대부분 외관 부품으로 사용되어 표면에 대한 불량 제거가 무엇보다 중요하며, 이를 위해 마지막 공정으로 폴리싱 작업을 수행하고 있다. 작업자에 의해 이루어지는 폴리싱 작업은 많은 힘을 요구하며, 이로 인해 작업자들의 피로도가 높은 공정으로 분류되어 기피공정이 되고 있다. 본 연구에서는 영상처리를 이용하여 폴리싱 공정의 작업을 작업자와 연계하여 불량위치를 검출하고 폴리싱 공정을 자동으로 수행할 수 있도록 폴리싱 자동화 장비의 개발하였다. 이를 통해 생산시간 단축(30초)및 작업인원 1명 감소로 생산단가의 경쟁력을 높이는 개선효과를 기대하게 되었다.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.35-42
• /
• 2015

사출성형은 플라스틱 제품의 대량생산에 적합한 제조기술이지만 사출성형공정에서 사출품의 휨 변형이 항상 문제가 되고 있다. 본 연구에서는 전자동 정제분류 포장시스템의 호퍼 제품을 기존의 ABS 수지에서 PP 수지로 변경하는 경우에 생기는 사출품의 휨 변형을 최소로 하는 것을 목적으로 하였다. Moldflow 소프트웨어를 이용하여 호퍼의 사출성형 공정을 해석하여 호퍼의 휨 변형을 최소로 하기위한 게이트의 형상과 리브 형상을 결정하였으며 실 제품의 사출성형을 통해 사출성형 해석결과의 타당성을 입증하였다. 결정성 수지인 PP 재료의 사출성형 시에는 유동선단의 면적이 넒은 경우가 유리하며 리브를 보강하는 것이 휨 변형을 줄일 수 있다는 것을 알 수 있었다.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.111-118
• /
• 2020

The convergence of artificial intelligence with smart factories or smart mechanical systems has been actively studied to maximize the efficiency and safety. Despite the high improvement of artificial neural networks, their application in the manufacturing industry has been difficult due to limitations in obtaining meaningful data from factories or mechanical systems. Accordingly, there have been active studies on manufacturing components with sensor integration allowing them to generate important data from themselves. Additive manufacturing enables the fabrication of a net shaped product with various materials including plastic, metal, or ceramic parts. With the principle of layer-by-layer adhesion of material, there has been active research to utilize this multi-step manufacturing process, such as changing the material at a certain step of adhesion or adding sensor components in the middle of the additive manufacturing process. Particularly for smart parts manufacturing, researchers have attempted to embed sensors or integrated circuit boards within a three-dimensional component during the additive manufacturing process. While most of the sensor embedding additive manufacturing was based on polymer material, there have also been studies on sensor integration within metal or ceramic materials. This study reviews the additive manufacturing technology for sensor integration into plastic, ceramic, and metal materials.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.77-87
• /
• 2003

The residual stress and birefringence in injection-molded plastic parts can be divided into the flow-induced residual stress and birefringence produced in flowing stage, the thermally-induced residual stress and birefringence produced in cooling stage. However, the physics involved in the generation of the thermally-induced residual stress and birefringence still remains to be understood. Because polymer experiences viscoelastic history near the glass-transition temperature it is hard to model the entire process. Volume relaxation phenomenon was included to predict the final thermally-induced residual stress and birefringence in quenched plastic parts more accurately. The present study focused on comparing the predicted values far thermally-induced residual stress and birefringence with and without volume relaxation behavior (or free volume theory) under free and constrained quenching conditions. As a result, tile residual stress remained as a tensile stress at the center and as a compressible stress near the surface for the free quenching cases. In contract the residual stress remained as a compressible stress at the center and as a tensile stress near the surface fur the constrained quenching cases. The residual birefringence remained as minus values at the center and as plus values near the surface for the free quenching cases. Interestingly the residual birefringence showed minus values in entire zone for the constrained quenching cases. In the prediction of birefringence only the case including free volume theory showed the correct result for the distribution of birefringence in thickness direction.

• 복식문화연구
• /
• 제12권4호
• /
• pp.663-675
• /
• 2004

The plastic arts is used when designers draw inspirations to create fashion design. The author referred to fashion magazines for designing ideas of Mondrian＇s geometrical abstract painting in practical applications used by designers in Paris, Italy, London and New York during the 10-year period(1991-2000). The collections of data were analyzed as following: ◇ Fashion Designing Idea 1. Matching Idea The art is reproduced in the design as how it is with no transformation. First, the painting＇s complete figure is reproduced on the entire or parts of clothing. Second, the painting＇s partial figure is reproduced on the entire or parts of clothing. 2. Contrasting Ideas The composition elements in Mondrian＇s geometrical abstract painting, for example, structures of shapes, vertical and horizontal lines and different colors are applied in the design. First, one particular shape in painting is transformed into different shape of square, circle or triangle and reproduced in designing. Second, one particular shape in painting is disassembled and then reshaped into different form in reproduction. Third, additional lines are put in to create different look from the original painting. Forth, existing lines are extended over the boundary to create different look from the original painting. Fifth, achromatic colors: black and white, and three basic colors: red, blue and yellow in the original painting are modified into different shades or color scheme is increased in broad range.

• Archives of Reconstructive Microsurgery
• /
• 제7권1호
• /
• pp.15-19
• /
• 1998

Microsurgical free-tissue transfer has allowed surgeons to salvage injured limbs but choosing appropriate healthy recipient vessels has proved to be a difficult problem. Retrograde flow flaps are established in island flaps. Retrograde flow anastomosis could prevent the possible kinking and twisting of the arterial anastomosis. By not interrupting the proximal blood flow to the fracture or soft tissue defect site, the compromise of fracture or wound healing might be prevented. We wished to estabilish an animal model in rat for a retrograde arterial flow based free flap. Nembutal-anesthetized male rats; weighing 250 to 300 gm, were used. The femoral artery and common carotid artery were exposed and divided. The systemic and retrograde arterial pressure were quantified by utilizing a parallel tubing system connected with peripheral arterial line. In this study, the retrograde flow was not pulsatile and the retrograde arterial pressure was 64-65mmHg, with a mean arterial pressure of 106-109mmHg. An epigastiic skin flap, measuring $3{\times}3cm$, was raised with its vascular pedicle. The epigastric free flap was transfered in the same rat from femoral vessels to carotid vessels in end to end fashion. We anastomosed the donor arteries to the distal parts of the divided recipient arteries and the donor veins to the proximal parts of the recipient veins. Twelve experiments were performed and the transplantations succeeded in 75 percent of them. In the remaining 25 percent, the experiments failed due to thrombosis at the site of anastpmosis, or other causes. This animal model represents an excellent example of retrograde arterial flow free flap transfer that is reliable.

• Archives of Plastic Surgery
• /
• 제34권5호
• /
• pp.659-662
• /
• 2007

Purpose: Multiple skin leiomyoma and uterine myoma bearing autosomal dominant traits are benign smooth muscle tumors which originate in skin or female uterus. Skin leiomyoma occurs after gene mutation originating from arrector pili muscle of hair follicle where its clinical manifestations vary significantly from person to person. Our department hereby reports the histological findings and genetic evaluations of this very rare disease. Methods: A 57-year-old woman presented in our institute with multiple tumors in the left and central parts of her back that started to appear since 19 years ago. The patient was diagnosed as having uterine myoma 15 years ago and underwent hysterectomy. Biopsy has been done on the specimen, and genomic DNA was separated from Fumarate hydratase gene for it to go through PCR amplification. The results of PCR amplification were aligned by sequencer. Results: According to the results of biopsy, tumor cells were spindle-shaped and were aligned in a bundle where there was no dysplasia or mitosis. Moreover, these cells had abundant eosinophilic cytoplasm with elongated nucleus, and benign leiomyoma that showed positive reactions to SMA stain were found. In genetic examination, mutations such as heterozygous single nucleotide substitutions were found in alignments of amplified DNA. Conclusion: Multiple skin leiomyoma and uterine myoma are relatively uncommon diseases that are transmitted through autosomally dominant traits from genetic mutations. When a patient's chief complaint lies upon skin-colored or brown masses that occur in multiples appearing in the trunk or extremities with characteristic clinical symptoms and histological findings, and when the patient's family history is acknowledged such as skin or uterine leiomyoma or renal tumor, necessary genetic examination on multiple skin leiomyoma and uterine myoma could be done, and thereby precise diagnosis could also be made.

• Archives of Plastic Surgery
• /
• 제38권6호
• /
• pp.783-790
• /
• 2011

Purpose: The zygoma (Zygomaticomaxillary) complexes make up a large portion of the orbital floor and lateral orbital walls. Zygoma fracture frequently causes the posteromedial displacement of bone fragments, and the collapse or overlapping of internal orbital walls. This process consequently can lead to the orbital volume change. The reduction of zygoma in an anterolateral direction may influence on the potential bone defect area of the internal orbital walls. Thus we performed the quantitative analysis of orbital volume change in zygoma fracture before and after operation. Methods: We conducted a retrospective study of preoperative and postoperative three-dimensional computed tomography scans in 39 patients with zygoma fractures who had not carried out orbital wall reconstruction. Orbital volume measurement was obtained through Aquarius Ver. 4.3.6 program and we compared the orbital volume change of injured orbit with that of the normal contralateral orbit. Results: The average orbital volume of normal orbit was 19.68 $cm^3$. Before the operation, the average orbital volume of injured orbit was 18.42 $cm^3$. The difference of the orbital volume between the injured orbit and the normal orbit was 1.18 $cm^3$ (6.01%) on average. After operation, the average orbital volume of injured orbit was 20.81 $cm^3$. The difference of the orbital volume between the injured orbit and the normal orbit was 1.17 $cm^3$ (5.92%) on average. Conclusion: There are considerable volume changes in zygoma fracture which did not accompany internal orbital wall fracture before and after operation. Our study reflects the change of bony frame, also that of all parts of the orbital wall, in addition to the bony defect area of orbital floor, in an isolated zygoma fracture so that it evaluates orbital volume change more accurately. Thus, the measurement of orbital volume in isolated zygoma fractures helps predict the degree of enophthalmos and decide a surgical plan.

• 한국작물학회지
• /
• 제57권4호
• /
• pp.449-455
• /
• 2012

서양민들레의 시설생산을 위해 배지조성 및 차광정도를 달리한 환경조건에 대한 생육특성과 그에 따른 생리활성 변이를 검토하고자 온실과 실험실 시험을 수행하였다. 서양민들레 시설생산을 위한 적정한 배지조합은 coco peat와 perlite를 각각 70 : 30과 50 : 50으로 혼합한 배지가 coco peat와 perlite 각각의 단독배지보다 생육 및 수량에 있어서 유의적으로 높게 나타났다(p<0.05). 차광정도에 따른 서양민들레의 초장, 근장, 엽수, 근직경, 엽면적, 엽록소 함량 및 생체중은 무차광이 50%와 70%차광보다 유의적으로 높게 나타났다(p<0.05). 총 페놀 함량과 총 플라보노이드 함량은 지하부보다는 지상부에서 높게 나타났다. 총 페놀 함량은 무차광에서 차광보다 높게 검출되었고, 총 플라보노이드 함량은 50%차광에서 가장 높았고 그 다음이 무차광과 70%차광 순으로 높았다. 한편, DPPH 라디컬 소거능과 아질산염 측정을 통한 항산화성은 추출물 농도가 증가할수록 높은 활성을 보였고 지하부보다는 지상부에서, 차광보다는 무차광에서 높은 활성을 보였다.