1 |
R. Zheng, R.I. Tanner, X.J. Fan, Shrinkage and warpage in injection molding, Springer Berlin Heidelberg, pp.87-10, 2011. DOI: http://dx.doi.org/10.1007/978-3-642-21263-5
DOI
|
2 |
S.Y. Han, "The relation between injection molding conditions and gloss of ABS molding", J. Korea Academia-Industrial Coop. Soc., Vol.14(11), pp.5352-5356, 2013. DOI: http://dx.doi.org/10.5762/KAIS.2013.14.11.5352
과학기술학회마을
DOI
|
3 |
J.W. Son, Y.S. Kim, C.W. Han, "A quality stability estimation of shock-absorber tube for automatic drawer", J. Korea Academia-Industrial Coop. Soc., Vol.12(7), pp.2919-2924, 2011. DOI: http://dx.doi.org/10.5762/KAIS.2011.12.7.2919
과학기술학회마을
DOI
|
4 |
Moldflow, Autodesk Simulation Moldflow Insight/Synergy 2014, http://www.autodesk.co.kr
|
5 |
K.M. Kim, J.C. Park, H.I. Ahn, "Direct search-based robust design of wrapage in injection molded parts", J. Korean Soc. Quality Manag., Vol.29(3), pp.86-95, 2001.
|
6 |
M.S. Phadke, Quality Engineering using robust design, Prentice Hall, 1989.
|
7 |
G.H. Choi, K.D. Lee, N. Chan, S.K. Kim, "Optimization of process parameters of injection molding with neural network application in a rocess simulation environment", CIRP Annals, Vol.43, pp.449-452, 1994. DOI: http://dx.doi.org/10.1016/S0007-8506(07)62250-1
DOI
|
8 |
S. Taghizadh, A. Ozademir, O. Ulure, "Warpage prediction in plastic injection molded part using artificial neutral network", IJST, Trans. Mech. Engng., Vol.37(M2), pp.149-160, 2013.
|
9 |
C. Shen, L. Wang, Q. Li, "Optimization of injection molding process parameters using combination of artificial neural network and genetic algorithm method", J. Mat. Proc. Technol., Vol.183(2-3), pp.412-418, 2007. DOI: http://dx.doi.org/10.1016/j.jmatprotec.2006.10.036
DOI
|
10 |
M. Zhai, Y. Xie, "A study of gate location optimization of plastic injection molding using sequential linear programming", Int. J. Adv. Manuf. Technol. Vol.49, pp.97-10, 2010. DOI: http://dx.doi.org/10.1007/s00170-009-2376-1
DOI
|
11 |
R.K. Iranim, B.H. Kim, J.R. Dixon, "Towards automated design of the feed system of injection molds by integrating CAE, iterative redesign and feature". J Eng Ind Trans ASME Vol.117, pp.72-77, 1995. DOI: http://dx.doi.org/10.1115/1.2803281
DOI
|
12 |
M. Studer, F. Ehrig, "Minimizing part wrapage in injection molding by optimizing wall thickness distribution", Adv. Poly. Technol., Vol.21454, pp.1-16, 2014
|
13 |
M. Lee, J.H. Kim, S.R. Park, M.Y. Lyu, "A study on the wrapage in injection molded part for various part designs and non-reinforced resins", Elastomers Composites, Vol.44(4), pp.373-377, 2009
|