• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1585-1593
• /
• 2015

3D-structured (embossed) aluminum sheets have been used in the heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement imposed in making the embossing pattern. However, there are many restrictions in press forming of the embossed sheet compared with the flat sheet (non-embossed one) because of its difference in the mechanical properties and the geometrical 3-dimensional shape. In this paper we investigated the deformation characteristic of embossed aluminum sheet in the incremental sheet forming process which has frequently used in the design verification and the trial manufacturing of sheet products. The single point incremental forming (SPIF) experiments for the rectangular cone forming using the CNC machine with a chemical wood-machined die and a circular tool shape showed that the formability of the embossed sheet are better than that of the flat sheet in view of the maximum angle of cone forming. This comes from the fact that the embossed sheet between the tool and the elastic die wall is plastically compressed and the flatted area contributes to increase the plastic deformation. Also the tool path along the outward movement from the center showed a better formability than that of the inward movement from the edge. However the surface quality for the tool path along the outward movement evaluated from the surface deflection is inferior than that of the tool path along the inward movement.

• Journal of Life Science
• /
• v.19 no.9
• /
• pp.1309-1313
• /
• 2009

Endocrine disruptors are chemicals which can be found in our normal daily lives. Chemicals such as bisphenol A, DDT, benzophenone and phenylphenol can be easily ingested through plastic food containers and pesticides. Endocrine disruptors can be very harmful and toxic because they disrupt the normal function of the endocrine system. It has been reported that endocrine disruptions can cause fatal strikes in the cardiovascular, reproductive, and central nervous systems, and other parts of the body. Therefore we examined if benzophenone as an endocrine disruptor inhibits development in or induces malformation of chick embryos. Chick embryos which received a single injection of benzophenone ($1{\mu}g$/egg $\sim$ $500{\mu}g$/egg) via the yolk sac at designated times (6, 9, 12, 15, 18 and 21 days after incubation) were investigated. Body weight reduction was observed in middle doses ($40{\mu}g$/egg $\sim$ $60{\mu}g$/egg). High mortality rates and teratogenic signs such as abnormal wry beak and abnormal eyeballs were seen in high doses ($80{\mu}g$/egg $\sim$ $500{\mu}g$/egg). In conclusion, it is suggested that benzophenone induces malformation of chick embryos and seriously inhibits development.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.344-347
• /
• 2006

Watering methods for soybean sprouts could be mainly divided into two groups of overspraying and underwatering. The study was carried out to determine the effect of water supplying method on growth, morphological characteristics, colour and cutting resistance of soybean (cv. Junjery) sprouts and culture temperatures. The morphological characters, fresh and dry weights were measured on the 6th day after their culture, but daily mean temperatures inside the plastic culture boxes were measured by data-loggers. Lateral roots were more formed in the underwatering method (UM) than in the overspraying method (OM). Although their total lengths of both methods were nearly same, OM had longer hypocotyl but UM did longer root than the other. Middle and upper parts of hypocotyl were more thickened in UM than in OM. UM showed more hypocotyl fresh and dry weights than OM. There was, however, no significant difference between the two methods in cotyledon, root, total fresh and dry weights although the culture temperature was higher in OM than in UM.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.184-188
• /
• 1997

To investigate the absorption and transfer factor(TF) of Sr-85 by rice(Oryza sativa L.), experiments were carried out through pot cultivations on a sandy-loam soil treated 74 and 222Bq per gram of soil in a plastic film house. Sr-85 absorption rates of Ilpoombyeo, late maturing variety and Odaebyeo, early maturing variety, at harvesting stage, were 0.39-0.43% and 0.66-0.73%, respectively. Sr-85 absorption rates of Odaebyeo were about 1.5 times higher than those of Ilpoombyeo. Ratios of Sr-85 radiation and Sr-85 concentration in brown rice were much lower compared with those in straw and husk. Sr-85 concentrations in each part of Odaebyeo were remarkably higher than those of Ilpoombyeo. Transfer factor of Sr-85 from soil to plant ranged from 0.037 of brown rice to 4.13 of rice straw at harvesting stage. The order of the Sr-85 transfer factor in plant parts was straw>husk>brown rice. Sr-85 concentrations treated in soil had no effect on the growth and yield of rice.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.275-280
• /
• 2005

We propose a new approach to greatly simplify the fabrication of conventional nanoimprint lithography (NIL) by combined nanoimprint and photolithography (CNP). We introduce a hybrid mask mold (HMM) made from UV transparent material with a UV-blocking Cr metal layer placed on top of the mold protrusions. We used a negative tone photo resist (PR) with higher selectivity to substrate the CNP process instead of the UV curable monomer and thermal plastic polymer that has been commonly used in NIL. Self-assembled monolayer (SAM) on HMM plays a reliable role for pattern transfer when the HMM is separated from the transfer layer. Hydrophilic $SiO_2$ thin film was deposited on all parts of the HMM, which improved the formation of SAM. This $SiO_2$ film made a sub-10nm formation without any pattern damage. In the CNP technique with HMM, the 'residual layer' of the PR was chemically removed by the conventional developing process. Thus, it was possible to simplify the process by eliminating the dry etching process, which was essential in the conventional NIL method.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.6
• /
• pp.514-523
• /
• 2006

The purpose of the present study was to evaluate the effects of several implant surface treatments to the bone formation, by placing Machined implants, 75${\mu}m$ Calcium phosphate-blasted implants and $Al_2O_3$-blasted and acid-etched implants in rabbit tibia through histomorphometric study. Two animals of each group were sacrificed at 2, 4, 8 weeks. The specimens containing the implants were dehydrated and embedded into hard methylmethacrylate plastic. Thereafter, the sections were ground to 50${\mu}m$. The specimens were stained with Villanueva bone stain for a light microscopic study. The results were as follows; 1. When the surface roughness of three different implants was measured by Surfcorder, the Ra of the Machined group, the RBM group and the SLA group was 0.16${\mu}m$, 0.44${\mu}m$, and 1.08${\mu}m$. 2. When examining the surfaces of the implants in the scanning microscope, Machined implant has the smooth surface with a few scratches, RBM implant has the rough surface with curled ridges and valleys, and SLA implant has the rough surface structures such as sharp protruding parts and micropits measuring 1-2${\mu}m$ in diameter. 3. After 2 weeks of implantation, the percentage of bone-to-implant contact of the Machined group, the RBM group and the SLA group was 26.86%, 35.40% and 45.99%. However, its differences between each group decreased during the healing periods. 4. After 2 weeks of implantation, the percentage of bone area inside the threads of the Machined group, the RBM group and the SLA group were 21.55%, 30.43% and 41.18%. However, its difference of bone area between machined group and surface treatment groups was maintained but the difference within the surface treatment groups decreased during the healing periods. In summary, the amount of bone formation in RBM and SLA group was greater than Machined group in early healing stage. These results suggest that RBM and SLA implants can reduce the healing period for osseointegration and may be suitable for early function.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.215-224
• /
• 2010

A greenhouse experiment was conducted to determine the effects of medium components and shade treatment on the growth, contents of total phenolics and flavonoids, and 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical scavenging activity of Youngia sonchifolia. Substrates combined with coco peat and perlite (ratio 70:30 or 50:50, v/v) showed higher plant length, leaf area, and fresh weight than single substrate (P<0.05). Shade treatment also significantly reduced plant height, root length, leaf areas, and fresh weight (P<0.05) with increasing of the degree. Shading treatment, however, increased contents of total phenolics [mg ferulic acid equivalents $kg^{-1}$ dry wt.] and total flavonoids [mg naringin equivalents $kg^{-1}$ dry wt.] in shoot parts of Y. sonchifoli, showing 110.2 to 119.2 and 128.3 to 146.7 mg $kg^{-1}$, respectively. The antioxidant potential of the methanol extracts from the plants dose-dependently increased DPPH free radical scavenging activity, and the activity was higher in shoots (50.2 to 80.8%) than in roots (47.7 to 49.8%), and in shading treatment than in no shade.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.499-505
• /
• 2017

In this study, the limit loads calculated by the $m_{\alpha}-tangent$ method based on the linear finite element analysis are compared with the closed form solutions that are proposed by various authors. The objects of the analysis is to select the elbow and the branch pipe which are representative structure of piping system. The applicability of the $m_{\alpha}-tangent$ method are investigated by applying it to cases with various geometries. The internal pressure and the in-plane bending moment are considered and the $m_{\alpha}-tangent$ method is in good agreement with the existing solutions in case of elbows. However, the limit loads calculated by the $m_{\alpha}-tangent$ method for branch junctions do not agree well with the existing solutions and do not show any tendency. The reason is a biased result due to the stress concentration of the discontinuous parts.

• Fire Science and Engineering
• /
• v.24 no.2
• /
• pp.82-88
• /
• 2010

In this study, we have performed several tests for composite plastic materials to be applied on interior materials of a vehicle to identify their combustion characteristics using cone calorimeter, smoke density chamber and toxicity index chamber. We have prepared a total of 12 samples for 4 major parts of a vehicle wherein each major part has 3 different materials. The results of cone calorimeter test showed ignition time of PVC sheet and PVC leather were 2s. The 8 samples showed under less than 10s of ignition time. The sample comprising Nylon and PE had the biggest maximum heat release rate of 635 $kW/m^2$. The sample comprising Rubber showed the smallest maximum heat release rate but with the biggest total heat release. The results of smoke density chamber test showed the sample that is made up with Rubber had the biggest specific optical smoke density. The sample comprising PVC leather and PUR showed the biggest VOF4 which enables the initial smoke production. The results of toxicity index test showed that all samples contained carbon dioxide content exceeding its lethal concentration. The sample comprising PVC showed high content of hydrogen chloride and hydrogen bromide. The PVC sheet showed the biggest toxicity index calculated by using lethal concentration and test results. Toxicity index of all sample wes over 1.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.53-64
• /
• 2009

MIRIS is the main payload of the STSAT-3 (Science and Technology Satellite 3) and the first infrared space telescope for astronomical observation in Korea. MIRIS space observation camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}\times3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200 K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI (Multi Layer Insulation) of 30 layers, and GFRP (Glass Fiber Reinforced Plastic) pipe support in the system. Optomechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.