• Journal of Ocean Engineering and Technology
• /
• v.10 no.2
• /
• pp.53-60
• /
• 1996

Many studies on the plastic spin have been done, but it is still an opened subject. It is essential for the modelling of plastic spin to understand its origin and governing parameters. For the task, it is helpful to know the hehavior of sigle crystal. This study gives the interpretations for the plastic spin of a B.C.C(body centered cubic crystal) by numerical simulation. It is discussed that the different levels of shear stresses induced on each slip pair in crystallographic slip systems and the nonlinear relationship between shear stress and slip velocity are the fundamental mechanisms of plastic spins. Finally some comments are provided on the plastic spin of polycrystal.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.9-12
• /
• 2000

The importance of the role of plastic spin in the rate-dependent response of materials at large deformations is the main objective of this work. After a brief presentation of a general consitutive framework for visco-rigid plasticity at large strains an isotropic/kinematic hardening and a visco-rigid plastic model are used to analyze the stress-strain response under simple shear. A clear understanding of the role of plastic spin is achieved by obtaining numerical analyzed results for different stress values in which the plastic spin consititutive parameters interrelaste with the strain rate and other more conventional model constants, Especially this paper is concerned with introducing behaviors of Al7075

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.04a
• /
• pp.96-100
• /
• 2000

It is difficult to predict material behavior of forming process because the plastic instable flow phenomenon happens in practical forming process I. e. upsetting backward extrusion piercing indentation. In view of the direct relationship between instable material flow and quality defects of the products we should find out their phenomena, In this study we introduced the plastic spin and the kinematic hardening considering the kinematic hardening constitutive equation for rate-dependent material. Also analysis of upset forging is carried out using the rigid plastic FEM with Al7075

• Transactions of Materials Processing
• /
• v.14 no.4 s.76
• /
• pp.327-337
• /
• 2005

In the present work, the two back stress kinematic hardening models are proposed by combining Armstrong-Frederick, Phillips and Ziegler's hardening rules. Simple combination of hardening rules using simple rule of mixtures results in various evolutions of the kinematic hardening parameter. Using the combined hardening models the ultimate back stress fur the present models is also derived. The stress rate is co-rotated with respect to the spin of substructure due to the assumption of kinematic hardening rule in finite deformation regime. The work piece under consideration is assumed to consist of the elastic and the rigid plastic deformation zone. Then, the J2 deformation theory is facilitated to characterize the plastic deformation behavior under various loading conditions. The plastic deformation localization behaviors strongly depend on the constitutive description namely back stress evolution and its hardening parameters. Then, the analysis for Swift's effects under the fixed boundaries in axial directions is carried out using simple shear deformation.

• International Journal of Automotive Technology
• /
• v.4 no.4
• /
• pp.165-172
• /
• 2003

This article deals with the spin loss analysis of friction drive CVTs, especially for the cases of S-CVT and SS-CVT. There are two main sources of power loss resulting from slippage in the friction drive CVT, spin and slip loss. Spin loss, which is also a main design issue in traction drives, results from the elastic contact deformation of rotating bodies having different rotational velocities. The structure and operating principles of the S-CVT and SS-CVT are first reviewed briefly. And to analyze the losses resulting from slippage, we reviewed previous analyses of the friction mechanism. A modified classical friction model is proposed, which describes the friction behavior including Stribeck (i.e., pre-sliding) effect. It is also performed an in-depth study for the velocity fields generated at the contact regions along with a Hertzian analysis of deflection. Hertzian results were employed to construct the geometric parameters and normal pressure distributions of the contact surface with respect to elastic and plastic deformations. With analytic formulations of the relative velocity field, deflection, and friction mechanism of the S-CVT and SS-CVT, quantitative analyses of spin loss for each case are carried out. As a result, explicit models of spin loss were developed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.10a
• /
• pp.178-184
• /
• 1995

A new combined isotropic/kinematic and orthotropic hardening viscoplastic model is proposed which can account for not only differential orientations but also preferred orientations of grains in n metal at finite plastic deformations with an introduction of multiple spin (rate of rotation) concept within the general framework of the model, the effects of anisotropy and constitutive spins will be discussed in conjunction with a closed-form solution for simple shear in n rigid-plastic material, which will be used to simulate experimental data of Montheillet, et al. (1984) for fixed-end tortion tests at finite plastic deformations.

• Journal of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.149-155
• /
• 1975

Pivalic acid, which has a globular shape and is a plastic crystal, has been examined by means of temperature-dependent with-line proton magnetic resonance spectroscopy. Results of temperature-dependent line width, second moment, and spin-lattice relaxation time studies of pivalic acid were interpreted in terms of dynamic behavior and hydrogen bonding. The dynamic behavior consists of superimposed reorientation of the methyl groups about their three-fold axes$(C_3) and of the molecule about the central C-C bond(C_3'),$ general molecular reorientation about the center of gravity, and molecular self-diffusion. Activation energies for the motional processes have been obtained from line width measurements using the modified Bloembergen, Purcell, and Pound theory and from spin-lattice relaxation time measurements. The results were compared with the Pople-Karasz theory of fusion and the agreement was found to be poor. The discrepancy was interpreted in terms of hydrogen bonding in this molecule.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.2
• /
• pp.42-52
• /
• 1996

소성스핀을 취급하기 위한 이론을 살펴보면 개념적으로 현저히 다른 세가지로 압축된다. 또한 재료직조 현상이 소성스핀의 근원이라고 알려져 있지만, 그 지배인자와 발생근원에 대하여 아직 충분히 연구되어 있지 않다. 따라서 앞으로의 연구에 올바른 방향을 제시하기 위하여 소성스핀의 기본적인 거동에 대한 연구가 요구된다. 본 연구에서는 체심입방격자 다결정의 소성스핀 시뮬레이션을 통하여, 소성스핀의 거동을 조사하였는데, 재료직조, 변형경화, 변형속도, 하중역전 등의 영향을 검토하였다. 소성발생원인으로 재료직조현상이 강조되었고, 이에 관련한 주요지배인자를 제시하였다. 무차원 소성스핀은 변형속도, 재료경화에 영향을 받으나 재료직조와 관련한 인자와 비교하여 그 영향이 작게 나타났다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.173-176
• /
• 2005

Teijin사의 HT100-B60의 폴리카보네이트(polycarbonate) $100{\mu}m$, I-Component사의 PES(polyethersulfone) $200{\mu}m$, Ferrania사의 PAR(polyacrylate) $100{\mu}m$와 $200{\mu}m$를 사용하였다 열팽창계수의 차이로 인해 공정상 기판의 가열과 냉각시 열응력이 발생하여 기판의 크랙발생의 원인이 된다. 이를 최소화하기 위해 모든 공정이 시작하기 전에 pre-annealing을 통해 plastic 기판의 시간별 공정을 실시하였다. plastic film의 annealing time은 0h, 12h, 24, 40h, 50h, 60h, 70h, 80h으로 사간을 달리하여 오븐 안의 진공상태를 조성하여 실험하였다. Thermal evaporator로 Al을 약 170nm 증착하였으며 (주)동진 세미캠의 DTFR-1011s DR LCD용 감광액을 Spin Coating Spread(500rpm/6sec), Spin(3000rpm/20sec)으로 coating하였다.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.2
• /
• pp.77-83
• /
• 2021

In this study, we investigated various coating methods of graphene oxide on the surface of a petri dish made of polystyrene and analyzed the physical and chemical properties of the coated surface. For coating, spinning, spraying and pressing methods were attempted. The coated surface was characterized by SEM, Raman Spectroscopy, AFM, FT-IR, UV-Vis Spectroscopy and Contact Angle measurement. By spin coating and spray coating, well distributed graphene oxide in the form of multiple islands on the plastic surface with an average size of 5 to 20㎛ are observed by SEM, and high binding energy between graphene oxide and plastic surface is measured by AFM. In case of hand press coating, graphene oxide of 10㎛ or more was observed, and low surface energy was measured. By FT-IR and Raman Spectroscopy analysis, surface coating of graphene oxide was confirmed.