• Biomolecules & Therapeutics
• /
• v.7 no.2
• /
• pp.198-203
• /
• 1999

Loxoprofen-Na (sodium 2-〔4-(2-oxocyclopentylmethyl)pheny)propionate dihydrate) is a potent analgesic drug. We developed loxoprofen-Na plasters to extend duration time of analgesic activity and to reduce side effect on gastrointestinal tract. Analgesic effect of Loxoprofen-Na plasters was investigated. Loxoprofen-Na plaster had good analgesic effect in rat paw pressure test, Tail-flick latency test and acetic acid-induced writhing test. Also, it had anti-inflammatory effect on carrageenan-induced rat hind paw edema. In pharmacokinetic study of Loxoprofen-Na, plasters dosage form showed that plasma drug concentration was prolonged up to 14 hours. So, we can conclude that loxoprofen-Na plasters, when applied on skin, will be a new type of drug for controlling the various local pain or inflammation.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.2
• /
• pp.107-112
• /
• 2002

To investigate the feasibility of developing a novel melatonin plaster, the effects of vehicles and drug loading dose on the in vitro permeation of melatonin across dorsal hairless mouse skin from pressure-sensitive adhesive (PSA) matrices were examined. Vehicles employed were propylene glycol laurate (PGL), propylene glycol monocaprylate (PGMC) and diethylene glycol monoethyl ether (DGME). Among PSAs used, only $Duro-Tak^{\circledR}$ 87-2196 showed a good peeling property. The release from $Duro-Tak^{circledR}$ 87-2196 was proportional to the square root of time, and dose-dependent. The fluxes increased as the loading dose increased over the doses under solubility. The relatively high permeation flux $(3.03{\pm}1.37\;{\mu}g/cm^2/hr)$ was obtained when using PGMC at the melatonin loading dose of $45\;mg/140\;cm^2$. Lag time was not affected by the vehicles used but by the thickness spread. The melatonin plasters prepared using PGMC showed a good adhesive property onto skin, and showed no crystal formation.

• Biomolecules & Therapeutics
• /
• v.9 no.4
• /
• pp.298-306
• /
• 2001

To develop a novel transdermal delivery system of loxoprofen (LP), a potent antiinflammatory and analgesic agent, the effects of vehicle composition and drug loading dose on the skin permeation property were investigated. And in vivo skin absorption property studied by analysing the $C_{max}$ and AUC was investigated after applying the developed plaster systems on rabbit back skin. Addition of isopropyl myristate (IPM) and IPM-diethylene glycol monoethyl ether (DGME) cosolvent in the plaster showed higher permeation rates than those from propylene glycol laurate-DGME cosolvent systems. As the concentration of LP in the plaster increased from 0.56 mg/$\textrm{cm}^2$ to 1.19 mg/$\textrm{cm}^2$, the drug release and skin permeation rates increased linearly. At loading dose of 1.19 mg/$\textrm{cm}^2$, the flux reached 35.6 $\mu$g/$\textrm{cm}^2$/hr. New LP plasters showed a good adhesive property onto skin, and showed no crystal formation. The AU $C_{0-24hr}$ and $C_{max}$ after dermal application of LP plaster (60 mg/70 $\textrm{cm}^2$) were found to be 6951$\pm$230 ng.hr/ml and 400$\pm$44 ng/ml, respectively. And the plasma concentration maintained above 300 ng/ml up to 24 hr period. In the carrageenan-induced rat paw edema test, LP plaster showed similar inhibition rate with marketed ketoprofen (Ketoto $p^{R}$) plaster.aster.r.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.1
• /
• pp.29-36
• /
• 1999

Aceclofenac is an non-steroidal antiinflammatory drug which has been used in the treatment of rheumatoidal rthritis and osteo-arthritis. In order to decrease the gastric ulcerogenic effects and contol the plasma level of aceclofenac, we have developed the transdermal delivery system of aceclofenac plaster, which were formulated employing matrix polymers of acrylates and penetration-enhancers such as $Lauroglycol^{\circledR}$, $Transcutol^{\circledR}$, oleic acid and linoleic acid. Using Franz diffusion cells mounted with a rat skin, transdermal penetration characteristics of the formulations were evaluated by the HPLC assay of aceclofenac and diclofenac, an active metabolite, in the receptor compartment of pH 7.2 phosphate buffered solution. Skin penetration was increased when the content of aceclofenac increased, showing the flux $(J,\;{\mu}g/cm^2/hr)$ of 0.37 and 2.50 for 2% and 6.75% of the content, respectively. The flux$(J,\;{\mu}g/cm^2/hr)$ from plasters made of $Durotak^{\circledR}$ 87-2074, $Durotak^{\circledR}$ 87-2510 and $Durotak^{\circledR}$ 87-2097 were 2.50, 2.77 and 4.39, respectively. $Durotak^{\circledR}$ 87-2074 showed the lowest penetration due to the carboxylic acid group in the polymer, which might form a strong hydrogen bonding with a secondary amine of aceclofenac. Although both $Durotak^{\circledR}$ 87-2510 and $Durotak^{\circledR}$ 87-2097 are amine-resistant adhesives, $Durotak^{\circledR}$ 872510 showed lower penetration than $Durotak^{\circledR}$ 87-2097 because of the hydroxyl group in $Durotak^{\circledR}$ 87-2510, which might form a weak hydrogen bonding with aceclofenac. These results reveal that the functional group in acrylic polymers would greatly affect the release of aceclofenac from the matrix, which is the rate-limiting step in the penetration of aceclofenac through rat skins. The penetration of aceclofenac from plasters using different penetration-enhancers increased in the following order: Transcutol < linoleic acid < oleic acid. And the flux from the plasters containing oleic acid as a penetrationenhancer was 2.22 times greater than that of creams, which suggest that a newly deveolped aceclofenac plaster could be used in the treatment of rheumatoidal arthritis and osteo-arthritis as an advanced transdermal delivery system.

• Archives of Pharmacal Research
• /
• v.24 no.6
• /
• pp.578-583
• /
• 2001

To investigate the feasibility of developing a new tenoxicam plaster, the effects of vehicles and penetration enhancers on the in vitro permeation of tenoxicam from a pressure-sensititre adhesive (PSA) matrices across the dorsal hairless mouse skin were studied. Vehicles employed in this study were propylene glycol (PC)-oleyl alcohol (OAI), PG-oleic acid (OA), and diethylene glycol monoethyl ether (DCMI)-propylene glycol monolaurate (PCML) cosolvents with/without fatty acids. In this studys amines such as triethanolamine (TEA) and tromethamine (TM) were additionally used as a solubilized. Among PSAs used, $Duro-Tak^{\circledR}$87-2510 showed much higher release rate than either $Duro-Tak^{\circledR}$ 87-2100 or $Duro-Tak^{\circledR}$87-2196. The relatively high flux rate was obtained with the formulation of DCMI-PCML (40:60, v/v) with 3% OA and 5% TM, and the flux increased as a function of the dose;the initial flux up to 12 h was $4.98{\pm}1.38{\;}{\mu\textrm{g}}/{\textrm{cm}^2}/h$ at the tenoxicam dose of $50{\;} mg/70{\;}{\textrm{cm}^2}$. This flux was much higher than that of a commercial piroxicam patch ($Trast^{\circledR}$) ($1.24{\pm}0.73{\;}{\mu\textrm{g}}/$\textrm{cm}^2/hr$) with almost only one-third that of the commercial patch. Therefore, these observations indicated that these composition of tenoxicam plaster may be practically applicable.

• Advances in concrete construction
• /
• v.6 no.2
• /
• pp.177-197
• /
• 2018

This paper presents a case study about the damages on the structural elements of a cast in place reinforced concrete (RC) building after a big fire which was able to be controlled after six hours. The fire broke off at the $2^{nd}$ basement floor of the building, which has five basements, one ground, and two normal floors. As a result of intensely stocked ignitable materials, it spread out to the all of the upstairs. In visual inspection, most of the typical fire damages were observed (such as spalling, net-like cracks, crumbled plasters, bared or visible reinforcement). Also, failures of the $2^{nd}$ basement columns were encountered. It has been concluded that the severity failures of the columns at the $2^{nd}$ basement caused utterly deformation of the building, which is responsible for the massive damages on the beam-column connections. All of the observed damages were categorized related to the types and presented separated regarding the floors. Besides to the visual inspection, the numerical analysis was run to verify the observed damaged on the building for columns, beams, and the connection regions. It is concluded from the study that several parameters such as duration of the fire, level of the temperature influence on the damages to the RC building. Also, it is highlighted by the study that if the damaged building is considered on the overall structural system, it is not able to satisfy the minimum service requirements neither gravity loads nor earthquake conditions.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.17-23
• /
• 2008

Gypsum products are used for the preparation of stone casts of oral and maxillofacial structures and as important adjuncts to dental laboratory operations involved in the production of dental prosthesis. Accuracy and dimensional stability over time are properties of concern in fixed prothodontics. Gypsum products used in denstry are a form calcium sulfate hemihydrate and are classified as 1 of 5 types according to International Standard Organization(ISO) 6873. All die materials exhibit some dimensional change during setting, but expansion and contraction during setting and dimensional changes in response to varations in temperature and the water-powder ratio must be minimal. Although numerous investigators have studied the properties of die materials, several products have been introduced recently with manufacturer claims of superior dimensional stalility. The aim of this study was to determine the surface properties using various separating materials of dental gypsum products The results were as follows 1. In the comparison of first and second plaster distances before separation in different separating agent, there was no significant difference except using Trio separating agent. The interface using Trio separating agent forms like to pores. 2. In the comparison of first and second plaster distances after separation in different separating agent, there was significant difference. The interface of plasters using WD-40, Trio and Vaseline was showed some gaps. Each they were measured at average 7.97 $\pm$ 2.07 ${\mu}m$, 63.09 $\pm$ 23.25 ${\mu}m$, 27.59 $\pm$ 4.19 ${\mu}m$. 3. In the comparison of the surface, the surface of control sample(using none seperating agent) showed irregular properties and the surface using Trio and Vaseline become wrinkled. Specially the surface using Vaseline was showed shiny properties. But the surface using MAGIC SEP, Plaster seperating agent, WD-40 showed regular properties.

• The Journal of Korean Medical History
• /
• v.16 no.1
• /
• pp.3-16
• /
• 2003

In researches done previously, the characteristics of the Hyangyak medicine in the early period of Chosun shown in "HyangyakBoncho(鄕藥本草)" in Vol. 76-85 of "Hyangyakjipseongbang(鄕藥集成方)" and "Sanghan section(傷寒門)" in Vol. 5-8 of "Hyangyakjipseongbang(鄕藥集成方)" was investigated. "Cough section(咳嗽門)" in "Various Diseases volume" of "Dongeuibogam(東醫寶鑑 雜病篇)" Vol. 5 and "Various Coughs section(諸咳門)" of "Hyangyakjipseongbang(鄕藥集成方)" Vol 24-25 which is a paragraph related to "Sanghan section(傷寒門)" was compared. The variety of the Hyangyak, processing methods and forms of the Hyangyak were shown by comparing each oriental medical botany(本草) used for treating cough(咳嗽) in "Dongeuibogam(東醫寶鑑)". Subsequently, the difference between each structure and medical theory was speculated. The facts revealed in this research is as follows. First, [Various Coughs section(諸咳門)] of "Hyangyakjipseongbang(鄕藥集成方)" uses only the Hyangyak, and no foreign medicines were used for treating cough(咳嗽) in "Dongeuibogam(東醫寶鑑)". Second, in [Various Coughs section(諸咳門)] of "Hyangyakjipseongbang(鄕藥集成方)", medicines related to diet and medicines taken raw were widely used, and various forms of medicine such as extracts, plasters, and gruels were used. Third, like other medical books in earlier periods, [Various Coughs section(諸咳門)] of "Hyangyakjipseongbang(鄕藥集成方)" describes the medical theory with conciseness, and keeps the structure of symptom classification focused on treatment and prescription. Fourth, as [Hyangyakboncho(鄕藥本草)] extensively uses the knowledge of oriental medical botany(本草) from two of Four Masters of GeumWon(金 元); JangWonSo(張元素) and LeeDongWon(李東垣), "Various Coughs section(諸咳門)" of "Hyangyakjipseongbang(鄕藥集成方)" quotes the books of JuDanGae but does not adopt the theory and prescriptions of 'replenishing yin and downbearing fire (滋陰降火)'. To find a more descriptive picture of the Hyangyak medicine for the treatment of 'cough(咳嗽)', a comparatitive study between the books written in the same period -"Euibangyuchui(醫方類聚)" and books compilated in China should be done, and there should be more profound researches done on individual medicines and prescriptions.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.15 no.1
• /
• pp.226-252
• /
• 2002

The results of a literature study about the comparison of Oriental-Occidental medicine on the Atopic dennatitis were as follows. 1. In Oriental medicine, Atopic dermatitis belongs to the category of the Naesun(내선), Taeryumchang(胎斂瘡), Eczema(濕疹), Chimumchang(浸淫瘡). In Occidental medicine, the other names of Atopic dermatitis are allergic eczema, IgE dermatitis, flexual eczema etc. 2. In Oriental medicine, the definition of atopic dermatitis includes chang(瘡), sun(선), and pung(風). Occidental medicine, is one of the intrinsic eczema classifications. In fact eczema term circumscribes dermatitis in atopic patients. 3. In Oriental medicine, the etiology and pathogenesis of Atopic dermatitis arose from the state of cogenital defect(稟賦不足), internal accumulation of damp and heat(濕熱內蘊) at first, and then invaded pathogenic wind, damp, heat factors again, and combined endo-exoteric pathogenic factors. So it appears in skin. In Occidental medicine, the etiology and pathogenesis of Atopic dermatitis approaches in genetic, allergic and immunologic, pharmacophysioloic aspects. It is only a hypothesis but there is no known facts about radical aetiology. 4. In Oriental medicine, differentiation of syndromes classifies manifestation aspects, etiology and pathogenesis, and invasion period. In Occidental medicine, it divides into an invasion period, and clinical aspect etc. 5. In Oriental medicine, Internal theraphys of Atopic dermatitis are decoction of ingredients(湯劑), pills(丸), and tablet(片). So, it prescribes as treatments on the ground of differentition of syndrome. In Occidental medicine, there is no radical therapy because Atopic dispositions don't change. But steroid, antihistamine as symptomatic tre atments are generally used in Occidental medicine. 6. In Oriental medicine, external therapies are wet dressings(濕敷), lotion(洗劑), powder(散劑), adhesive plasters(膏劑), oil(油劑), smoking(烟薰法), warm over fire therapy(熱烘療法), acupunture and moxibustion therapy(鍼灸療法).

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.143-155
• /
• 2018

In this study, we investigated the properties and manufacturing methods of soil mural finishing layers fabricated using animal glue, starch adhesive(wheat paste), and Dobak glue. We assessed the workability and weatherproofing properties of the earthen plaster and finishing layers fabricated using concentrations of 3%, 5%, 7% and 10% for each adhesive. The results showed that a mixture using 3% or 5% starch adhesive or 3% Dobak glue was suitable for constructing the finishing layer. For finishing layers made with animal glue, earthen plaster had poor workability. It was dry and easily broken as the concentrations of animal glue increased. However, specimens made with low concentrations of animal glue did not exhibit surface deterioration after a freezing-thawing test. Therefore, animal glue mixtures could possibly be used for constructing finishing layers in concentrations lower than 3%. Mixtures containing starch adhesive produced plasters with good workability. Additionally, starch adhesive enhanced compression strength. However, when starch adhesive was mixed at concentrations above 7%, the surface exhibited roughening and staining in freezing-thawing tests. When Dobak glue was used in mixtures, it enhanced compression strength, but concentrations above 5% produced specimens with surface cracking. For concentrations of 3%, there were no cracks and the specimens were stable after freezing-thawing tests, so concentrations below 3% of Dobak glue are suitable for constructing finishing layers. We expect this study will be useful for restoring the traditional technology of soil mural finishing layers and suggest using adhesives to construct the finishing layer.