• 자원리싸이클링
• /
• 제30권5호
• /
• pp.38-48
• /
• 2021

본 연구에서는 사용 후 태양광 셀을 HCl 용액 및 초음파세척기의 cavitation효과를 사용하여 셀 표면의 불순물(Al, Zn, Ag 등)을 제거하여 Si을 선택적으로 회수하기 위한 최적 공정 조건을 찾기 위한 연구를 진행하였다. 태양광 셀에서 Si을 선택적으로 회수 하기 위해 HCl 용액 및 초음파세척기를 사용하여 침출을 진행하였고, 반응이 끝난 태양광 셀은 증류수로 세척 후 건조 오븐에 건조를 실시하였고, 반응된 HCl 용액은 감압 여과 실시 후 여과된 용액은 ICP-Full Scan 분석을 실시하였다. 또한, 건조 된 태양광 셀은 유발을 사용하여 파쇄 후 XRD, XRF, 및 ICP-OES 분석을 실시하였으며, 이를 통해 Si의 순도 및 회수율을 알 수 있었다. 실험은 산용액 농도, 반응 온도, 반응 시간, 초음파 세기를 변수로 두고 실험을 진행하였다. 위 과정을 통해 최종적으로 태양광 셀로부터 Si을 선택적으로 회수하기 위한 최적 공정 조건은 산용액 농도 3M HCl, 반응 온도 60℃, 반응 시간 120min, 초음파 세기 150W인것을 알 수 있었고, 최종적으로 Si의 순도는 99.85%, 회수율은 99.24%로 측정되었다.

• 청정기술
• /
• 제27권3호
• /
• pp.240-246
• /
• 2021

COF (Chip on film)용 폐에칭용액 내 구리가 약 3.5% 함유되어 있으며, 철 시편을 사용한 시멘테이션을 통해 구리를 회수하고자 하였다. 철 시편 3종류(플레이트, 칩, 분말)에 따른 시멘테이션 반응에 미치는 영향을 조사하였으며, 구리의 회수율을 높이고자 구리에 대한 철의 몰 비를 변수로 하였다. 반응 전·후 용액 내 시간에 따른 구리 농도의 변화를 확인하였으며, 몰 비를 증가시킬수록 초기 용액 내 구리 함량이 급격히 줄어드는 경향이 나타났다. 상온에서 1시간의 시멘테이션 반응 후 철 시편의 비표면적 값이 큰 플레이트, 칩, 분말 순으로 구리의 회수율이 증가하였다. 회수된 분말은 X선 회절 분석기(X-ray diffraction, XRD), 주사전자현미경(scanning electron microscopy, SEM) 및 에너지 분산형 분광분석법(Energy-dispersive X-ray spectroscopy, EDM) 분석을 통해 결정상과 결정 형태를 확인하였으며, 철 분말의 경우에는 회수된 구리 분말에 미반응된 철 성분이 혼재하였다. 구리에 대한 철의 몰 비 4의 조건으로 철 칩을 사용하였을 때, 구리 회수율 약 98.4%로 최적 조건으로 달성하였다.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.92-92
• /
• 2002

Considerable attention has been focused on the cryopreservation of semen and estrus induction in dog, as consequence of poor productivity caused by long anestrus period, in order to enhance the productivity of youngs and to preserve the breeds. The objectives of this study were to evaluate semen quality after cryopreservation and to evaluate the Pregnancy rate after insemination (AI). Fifty infertilie dogs (age 2∼3 years) were selected for the study and divided into three different estrus induction treatment groups. Group 1: dogs (n=15) were given clomifene (0.1 mg/kg) orally for five days at 12 hr intervals. Group 2: dogs (n=15) were given bromocriptine (50 $\mu\textrm{g}$/kg) orally for five days at 12 hr intervals, followed by single injection intravenously of 500 IU GnRH (Group 3, n=20) when pro-estrus occurred. The rates of pregnancy in estrus inducted dogs mated naturally compared to those inseminated artificially with ejaculated fresh semen and frozen-thawed semen. Estrus detection was performed using the method of vaginal smear and confirmed by the plasma progesterone assay. The ejaculated semen to freeze was exposed to a mixture of Tris extender with cryoprotectant (Trisma, 81 mM: TES, 209 mM: citric acid, 6 mM; glucose, 5 mM; glycerol, 8%) and cryopreserved gradually by slow-cooling at 17 cm above the surface of liquid nitrogen (LN$_2$) for 23 min. The motility of frozen-thawed spermatozoa was assessed by phase-contrast microscopy. To assess their viability and acrosome content, spermatozoa were stained with a vital stain and Fluorescence conjugated lectin Pisum Savitum Agglutinin (FITC/PAS), respectively. Pregnancy was confirmed by ultrasonograpy on day 25, 35 and 55 post insemination. The use of fresh semen, the pregnancy rates were observed 66.6, 66.6, 75.0 and 83.3% in natural estrus, clomifene induced, bromocriptine induced and a combination of GnRH and bromocriptine, respectively. The use of frozen-thawed semen, the pregnancy rates were observed 66.6, 33.3, 50.0 and 60.0% in natural estrus, clomifene induced, bromocriptine induced and a combination of GnRH and bromocriptine, respectively. No difference was observed in the number of offspring produced among natural estrus and treated groups inseminated with fresh or frozen-thawed semen. In conclusion, the pregnancy rate of dogs treated with a combination of GnRH and bromocriptine was more effective than use of clomifene or bromocriptine only. In addition, frozen-thawed semen can be used successfully far artificial insemination in dog.

• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.8-16
• /
• 2023

디바이스 소형화의 한계에 다다르면서, 이를 극복할 수 있는 방안으로 차세대 패키징 기술의 중요성이 부각되고 있다. 병목 현상을 해결하기 위해 2.5D 및 3D 인터커넥트 피치의 필요성이 커지고 있는데, 이는 신호 지연을 최소화 할 수 있도록 크기가 작고, 전력 소모가 적으며, 많은 I/O를 가져야 하는 등의 요구 사항을 충족해야 한다. 기존 솔더 범프의 경우 미세화 한계와 고온 공정에서 녹는 등의 신뢰성 문제가 있어, 하이브리드 본딩 기술이 대안책으로 주목받고 있으며 최근 Cu/SiO₂ 구조의 문제점을 개선하고자 SiCN에 대한 연구 또한 활발히 진행되고 있다. 해당 논문에서는 Cu/SiO₂ 구조 대비 Cu/SiCN이 가지는 이점을 전구체, 증착 온도 및 기판 온도, 증착 방식, 그리고 사용 가스 등 다양한 증착 조건에 따른 SiCN 필름의 특성 변화 관점에서 소개한다. 또한, SiCN-SiCN 본딩의 핵심 메커니즘인 Dangling bond와 OH 그룹의 작용, 그리고 플라즈마 표면 처리 효과에 대해 설명함으로써 SiO₂와의 차이점에 대해 기술한다. 이를 통해, 궁극적으로 Cu/SiCN 하이브리드 본딩 구조 적용 시 얻을 수 있는 이점에 대해 제시하고자 한다.

• Journal of Chest Surgery
• /
• 제35권3호
• /
• pp.171-176
• /
• 2002

배경: 혈액이 이물질과 접촉을 하면 체내에서 응고 및 염증기전을 활성화 시키게 되고 임상적으로 폐 및 신장 기능의 저하, 출혈 등을 유발할 수 있고 심한 경우 다발성 장기기능 저하까지 발생할 수 있다. 이 때문에 혈액-이물질 접촉표면을 개선하는 여러 가지 시도들이 이루어지고 있고 혈액접촉표면의 적합성을 평가하는 지표의 선택은 대단히 중요하다. 접촉면의 응고기전에서 혈소판의 침착이 가장 중요한 단계이고 혈소판의 침착을 확인하기 위하여 표면흡착 정도를 비교하는 방법이 흔히 사용되고 있는데, 대부분 in-vitro 혹은ex-vivo조건에서 시행되고 있으므로 생체 내 in-vivo상황을 정확히 대변한다고 보기 힘들다. 따라서 본 연구는 in-vivo 실험조건에서 동위원소(radioisotope)를 이용하여 혈소판의 표면흡착 정도를 정량 분석하는 방법의 유용성을 분석하고자 계획되었다. 대상 및 방법: 돼지(20-25 kg, n=6)를 이용하여 하행대동맥 우회회로를 구성하였다. 우회회로는 헤파린 표면처리가 안된 일반 PVC 도관(대조군; Capiox, Terumo, Japan)과 이온결합 헤파린 표면 처리된 PVC 도관(실험군; Duraflo ll, Baxter, USA)을 Y-connector로 연결하여 2개의 회로를 동시에 구성하였다. 수술 전날 동종의 실험동물로부터 혈액을 채취하여 원심분리를 통해 고농도 혈소판 용액(platelet concentrate)을 추출하였고, 수술 당일 동위원소(Tc-99m-HMPAO, 180 $\mu$Ci)을 섞어 30분간 방치한 다음, 10분간 원심분리하여 침전층의 labeling efficiency를 측정하였다. 분리된 침전층에 혈장을 섞어(5 ml) 실험동물에 정맥주사한 후, 전신 헤파린 처치 상태에서(1 mg/kg) 하행대동맥을 차단하여 우회도관 쪽으로 2시간 동안 혈액을 순환시키고 분리하였다. 각 도관의 내강을 생리식염수 500 ml로 동시에 세척한 다음, 일정 간격으로10$\times$10 mm 크기의 절편을 5개 채취하였다. 절편을 세분하여 측정튜브에 담아 동위원소 측정기(gamma counter, Cobra II , Packard ,USA)를 이용하여 Tc-99m-HMPAO의 분당 count수를 측정함으로써 혈소판의 흡착정도를 정량분석 비교하였다. 결과: 동위원소 측정기를 이용한 평균 count수는 각각의 실험군과 대조군의 비율을 이용하여 비교하였다. 평균 count수는 대조군에서 537.3 Ci/min였고 실험군에서는 311.1Ci/min로 측정되었으며, 두 군 사이의 비율은 대조군에 비하여 실험군이 1: 0.58로 통계적으로 유의하였다.(p=0.004) 결론: 위결과를 통하여 실험군이 대조군에 비하여 혈소판 표면흡착측면에서 우수하다는 것을 정량적으로 증명할 수 있었다. 저자 등이 사용한 in-vivo 동위원소 측정법으로 혈소판 흡착정도의 생체 내 실험으로 유용하며 의료용 고분자 재료의 혈액적합성 판정의 지표로 제시하고자 한다.

• 대한치과보철학회지
• /
• 제33권3호
• /
• pp.584-609
• /
• 1995

The purpose of this study was to evaluate the difference of the galvanic corrosion behaviour of the titanium in contact with gold alloy, silva-palladium alloy, and nickel-chromium alloy using the immersion and electrochemical method. And the effects of galvallit couples between titanium and the dental alloys were assessed for their usefulness as materials for superstructure. The immersion method was performed by measuring the amount of metal elementsreleased by Inductivey coupled plasma emission spectroscopy(ICPES) The specimen of fifteen titanium plates, the five gold alloy, five silver-palladium, five nickel-chromium plates, and twenty acrylic resin plates ware fabricated, and also the specimen of sixty titanium plugs, the thirty gold alloy, thirty silver-palladium, and nickelc-hromium plugs were made. Thereafter, each plug of gold alloy, silver-palladium, and nickel-chromium inserted into the the titanium and acrylic resin plate, and also titanium plug inserted into the acrylic resin plate. The combination specimens uf galvanic couples immersed in 70m1 artificial saliva solution, and also specimens of four type alloy(that is, titanium, gold, silver-palladium and nickel-chromium alloy) plugs were immersed solely in 70m1 artificial sativa solution. The amount of metal elements released was observed during 21 weeks in the interval of each seven week. The electrochemical method was performed using computer-controlled potentiosta(Autostat 251. Sycopel Sicentific Ltd., U.K). The wax patterns(diameter 11.0mm, thickness,in 1.5mm) of four dental casting alloys were casted by centrifugal method and embedded in self-curing acrylic resin to be about $1.0cm^2$ of exposed surface area. Embedded specimens were polished with silicone carbide paper to #2,000, and ultrasonically cleaned. The working electrode is the specimen of four dental casting alloys, the reference electrode is a saturated calmel electrode(SCE) and the ounter electrode is made of platinum plate. In the artificial saliva solution, the potential scanning was carried out starting from-700mV(SCE) TO +1,000mV(SCE) and the scan rate was 75mV/min. Each polarization curve of alloy was recorded automatically on a logrithmic graphic paper by XY recorder. From the polarization curves of each galvanic couple, corrosion potential and corrosion rates, that is, corrosion density were compared and order of corrosion tendency was determined. From the experiments, the following results were obtained : 1. In the case of immersing titanium, gold alloy, silver-palladium alloy, and nickel-chromium alloysolely in the artificial saliva solution(group 1, 2, 3, and 4), the total amount of metal elements released was that group 4 was greater about 2, 3 times than group 3, and about 7.8 times than group 2. In the case of group 1, the amount of titanium released was not found after 8 week(p<0.001). 2. In the case of galvanic couples of titanium in contact with alloy(group 5, 6), the total amount of metal elements released of group 5 and 6 was less than that of group 7, 8, 9, and 10(p<0.05). 3. In the case of galvanic couples of titanium in contact with silver-palladium alloy(group 7, 8), the total amount of metal elements released of group 7 was greater about twice than that of group 5, and that of group 8 was about 14 times than that of group 6(p<0.05). 4. In the case of galvanic couples of titanium in contact with nickel-chromium alloy(group 9, 10), the total amount of metal elements released of group 9 and 10 was greater about 1.8-3.2 times than that of group 7 and 8, and was greater about 4.3~25 times than that of group 5 and 6(p<0.05). 5. In the effect of galvanic corrosion according to the difference of the area ratio of cathode and anode, the total amount of metal elements released was that group 5 was greater about 4 times than group 6, group 8 was greater about twice than group 7, and group 10 was greater about 1.5 times than group 9(p<0.05). 6. In the effect of galvanic corrosion according to the elasped time during 21 week in the interval of each 7 week, the amount of metal elements released was decreased markedly in the case of galvanic couples of the titanium in contact with gold alloy and silver-palladium alloy but the total amount of nickel and beryllium released was not decreased markedly in the case of galvanic couples of the titanium in contact with nickel-chromium alloy(p<0.05). 7. In the case of galvanic couples of titanium in contact with gold alloy, galvanic current was lower than any other galvanic couple. 8. In the case of galvanic couples of titanium in contact with nickel-chromium alloy, galvanic current was highest among other galvanic couples.

• 한국광물학회지
• /
• 제27권4호
• /
• pp.169-181
• /
• 2014

우리나라는 2008년부터 심해저 광물자원 확보를 위하여 남서태평양 통가국 EEZ 내 Tofua arc의 해저 화산열도에서 해저열수광상에 관한 조사를 지속적으로 수행하고 있다. 통가국 라우분지 TA 25 해저산에서 해저 열수 활동에 의하여 형성된 광물들의 특성과 분포를 규명하기 위하여 X선회절분석, 주사전자현미경 관찰, X선형광분석과 유도결합 플라즈마 방출분광분석을 실시하였다. 연구에 사용된 시료는 TA 25 해저산 주변에서 채취된 7개의 코어 시료와 9개의 해저퇴적물 시료이다. 열수분출구 모든 지역에서 중정석, 섬아연석, 클리노클레이스 등이 존재하고, 열수분출구 A 지역에는 석고, 스멕타이트 및 카올린 광물, 열수분출구 B와 C 지역에는 스멕타이트, 카올린 광물, 황동석과 황철석, 열수분출구 D 지역에는 석고, 황동석, 황철석, 침철석 등이 분포한다. 점토부분에 대한 분석 결과 칼데라 중심부 지역을 제외한 모든 지역에서 스멕타이트와 소량의 카올리나이트가 포함되어 있는 것으로 보아 이질변질작용에 해당하는 열수변질이 있었음을 알 수 있다. 열수분출구 B, C, D 지역은 여러가지 종류의 황화광물과 비소화광물이 존재한다. 광물조성, 주성분과 미량성분 분석 결과로 판단할 때 열수분출구 B, C, D 지역이 비교적 강한 고온의 열수변질작용, 열수분출구 A와 칼데라 중심부 지역은 열수의 영향을 적게 받았거나 저온의 열수변질작용을 받은 것으로 판단된다. 추후 열수광상 탐사는 열수분출구 B, C, D 지역에서 수행되어야 할 것으로 여겨진다.

• E2M - 전기 전자와 첨단 소재
• /
• 제12권7호
• /
• pp.7-11
• /
• 1999

Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).

• Toxicological Research
• /
• 제8권2호
• /
• pp.343-357
• /
• 1992

Tumor necrosis factor-${\alpha}$(TNF), a polypeptide hormone secreted primarily by activated macrophages, was originally identified on the basis of its ability to cause hemorrhagic necrosis and tumor regression in vivo. Subsequently, TNF has been shown to be an important component of the host responses to infection and cancer and may mediate the wasting syndrome known as cachexia. These systemic actions of TNF are reflected in its diverse effects on target cells in vitro. TNF initiates its diverse cellular actions by binding to specific cell surface receptors. Although TNF receptors have been identified on most of animal cells, regulation of these receptors and the mechanisms which transduce TNF receptor binding into cellular responses are not well understood. Therefore, in the present study, the mechanisms how TNF receptors are being regulated and how TNF receptor binding is being transduced into cellular responses were investigated in rat liver plasma membranes (PM) and ME-180 human cervical carcinoma cell lines. $^{125}I$-TNF bound to high ($K_d=1.51{\pm}0.35nM$)affinity receptors in rat liver PM. Solubilization of PM with 1% Triton X-100 increased both high affinity (from $0.33{\pm}0.04\;to\;1.67{\pm}0.05$ pmoles/mg protein) and low affinity (from $1.92{\pm}0.16\;to\;7.57{\pm}0.50$ pmoles/mg protein) TNF binding without affecting the affinities for TNF, suggesting the presence of a large latent pool of TNF receptors. Affinity labeling of receptors whether from PM or solubilized PM resulted in cross-linking of $^{125}I$-TNF into $M_r$ 130 kDa, 90 kDa and 66kDa complexes. Thus, the properties of the latent TNF receptors were similar to those initially accessible to TNF. To determine if exposure of latent receptors is regulated by TNF, $^{125}I$-TNF binding to control and TNF-pretreated membranes were assayed. Specific binding was increased by pretreatment with TNF (P<0.05), demonstrating that hepatic PM contains latent TNF receptors whose exposure is promoted by TNF. Homologous up-regulation of TNF receptors may, in part, be responsible for sustained hepatic responsiveness during chronic exposure to TNF. As a next step, the post-receptor events induced by TNF were examined. Although the signal transduction pathways for TNF have not been delineated clearly, the actions of many other hormones are mediated by the reversible phosphorylation of specific enzymes or target proteins. The present study demonstrated that TNF induces phosphorylation of 28 kDa protein (p28). Two dimensional soidum dodecyl sulfate-polyacrylamide gel electrophoresis(SDS-PAGE) resolved the 28kDa phosphoprotein into two isoforms having pIs of 6.2 and 6.1. The pIs and relative molecular weight of p28 were consistent with those of a previously characterized mRNA cap binding protein. mRNA cap binding proteins are a class of translation initiation factors that recognize the 7-methylguanosine cap structure found on the 5' end of eukaryotic mRNAs. In vitro, these proteins are defined by their specific elution from affinity columns composed of 7-methylguanosine 5'-triphosphate($m^7$GTP)-Sepharose. Affinity purification of mRNA cap binding proteins from control and TNF treated ME-180 cells proved that TNF rapidly stimulates phosphorylation of an mRNA cap binding protein. Phosphorylation occurred in several cell types that are important in vitro models of TNF action. The mRNA cap binding protein phosphorylated in response to TNF treatment was purifice, sequenced, and identified as the proto-oncogene product eukaryotic initiation factor-4E(eIF-4E). These data show that phosphorylation of a key component of the cellular translational machinery is a common early event in the diverse cellular actions of TNF.

• 미생물학회지
• /
• 제45권3호
• /
• pp.246-250
• /
• 2009

레트로바이러스는 바이러스 외막과 숙주세포막의 융합에 의해 세포내로 들어간다. Moloney 마우스레트로바이러스(murine leukemia virus)의 외막 단백질은 표면단백질(SU)과 막단백질(TM)을 포함하는 85 kDa의 전구체로 합성되는데 바이러스의 성숙과정에 막단백질의 카르복시 말단 16개의 아미노산(R-peptide)이 바이러스의 프로티아제에 의해 절단된다. R 펩타이드가 절단된 막단백질은 Moloney 마우스레트로바이러스에 대한 수용체를 가진 NIH3T3 세포주에서 합포체(syncytium)를 형성한다. R 펩타이드가 절단된 막단백질의 합포체 형성 기작 연구를 위해 R 펩타이드가 절단되어 있으며 표면단백질의 PRR (proline rich region) 부위가 EGFP로 삽입되어진 Moloney full length molecular clone을 만들었다. 이 clone은 NIH3T3 세포에서 합포체를 형성하였으며 형광이 세포질과 세포막에서 관찰되었으나 핵은 염색이 되지 않고 검게 보여 신속 정확하게 합포체 관찰이 가능하였다. 흥미롭게도 절단된 막단백질을 가진 비리온이 NIH3T3 세포에서 광학현미경으로 관찰하였을때는 합포체를 형성하였으나 형광현미경에서는 형광이 관찰되지 않아서 비리온이 세포감염 없이 바이러스-세포 융합 방식으로 합포체를 형성한 것으로 생각되었다. 본 연구에서는 형광의 발현 여부로 합포체 형성을 신속 정확하게 관찰할 수 있는 방법을 개발하였으며 R 펩타이드가 절단된 비리온이 세포 감염 없이 세포와 세포 사이의 융합을 매개할 수 있음을 밝혔다.