• Journal of the Korean institute of surface engineering
• /
• v.38 no.3
• /
• pp.126-135
• /
• 2005

SKD 11 steel has been widely used for tools, metallic mold and die for press working because of its favorable mechanical properties such as high toughness and creep strength as well as excellent oxidation resistance. The ion nitrided tool steel containing Mo results in improvement of corrosion resistance, strength at high temperature and pitting resistance, especially in $Cl^-$ contained environment. But the Mo addition causes a disadvantage such as lower oxidation resistance at elevated temperature. In this study, several effects of ion-disadvantage on the oxidation characteristics for SKD 11 steel with various oxidation temperature were investigated. SKD 11 steels were manufactured by using vacuum furnace and solutionized for 1 hr at $1,050^{\circ}C$. Steel surface was ion nitrided at $500^{\circ}C$ for 1 hr and 5 hr by ion nitriding equipment. ion nitrided specimen were investigated by SEM, OM and hardness tester. Oxidation was carried out by using muffle furnace in air at $500^{\circ}C,\;700^{\circ}C\;and\;900^{\circ}C$ for 1hr, respectively. Oxidation behavior of the ion nitrided specimen was investigated by SEM, EDX and surface roughness tester. The conclusions of this study are as follows: It was found that plasma nitriding for 5 hr at $500^{\circ}C$, compared with ion nitriding for 1 hr at $500^{\circ}C$, had a thick nitrided layer and produced a layer with good wear, corrosion resistance and hardness as nitriding time increased. Nitrided SKD 11 alloy for 1hr showed that wear resistance and hardness decreased, whereas surface roughness increased, compared with nitrided SKD 11 alloy for 5 hr. The oxidation surface at $900^{\circ}C$ showed a good corrosion resistance.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.8-14
• /
• 2013

In this study, characteristics of the geometric design changes of plasma reformer for LPG fuelled vehicles were studied. To improve the yield of hydrogen, reformer 1st, and 2nd were designed. Secondary reformer compared to the primary reformer to increase the volume of the rear part of reformed gas having passed through the plasma and increased reaction time. To compare reforming results of two reformers, various experimental conditions such as, from partial oxidation to total oxidation conditions $O_2/C$ ratios, and total flow rate of 20, 30, 40, 50 lpm conditions, were varied. Results showed that with increasing $O_2/C$ ratios, LPG conversion rate increased, decreased hydrogen selectivity and hydrogen yield optimal point existed and secondary reformer 4.5 times larger than the primary reformer at the same flow rate to 4~14% increase in the yield of hydrogen.

• Journal of the Korean institute of surface engineering
• /
• v.54 no.4
• /
• pp.184-193
• /
• 2021

This study demonstrates formation behavior and morphological changes of PEO (Plasma Electrolytic Oxidation) films on AZ91 Mg alloy as a function of pre-treatment time in 1 M HF solution at 25 ± 1 ℃. The electrochemical behavior and morphological changes of AZ91 Mg alloy in the pre-treatment solution were also investigated with pre-treatment time. The PEO films were formed on the pre-treated AZ91 Mg alloy specimen by the application of anodic current 100 mA/cm² of 300 Hz AC in 0.1 M NaOH + 0.4 M Na₂SiO₃ solution. Vigorous generation of hydrogen bubbles were observed upon immersion in the pre-treatment solution and its generation rate decreased with immersion time. It was also found that 𝛽-Mg₁₇Al₁₂ in AZ91 Mg alloy was dissolved and a protective thin film of MgF₂ was formed on the AZ91 Mg alloy surface during the pre-treatment process in the 1 M HF solution. PEO film did not grow on the AZ91 Mg alloy specimen when the surface was not pre-treated and irregular PEO films with nodular defects were formed for the specimens pre-treated up to 1 min. Uniform PEO films were formed when the AZ91 Mg alloy specimen was pre-treated more than 3 min. The growth rate of PEO films on AZ91 Mg alloy increased significantly with increasing pre-treatment time.

• Korean Journal of Materials Research
• /
• v.15 no.6
• /
• pp.375-381
• /
• 2005

High temperature oxidation behavior of thermal barrier coating (TBC) system (IN738 substrate + NiCoCrAlY or NiAl bond coat with or without Pt + yttria stabilized zirconia) prepared by air plasma spray (APS) process has been studied in order to understand the effect of Pt addition to bond coat on the stability of TBC system. Specimens were oxidized in thermal cycling and isothermal oxidation test at $1100^{\circ}C$. The Pt addition in TBC system with NiCoCrAlY bond coat showed a longer life time compared to that without addition of Pt. Pt addition to TBC system is believed to help the formation of more stable thermally grown oxide, $Al_2O_3$, at the TBC/bond coat interface, leading to a longer lifetime of TBC system.

• Journal of the Korean institute of surface engineering
• /
• v.50 no.1
• /
• pp.17-23
• /
• 2017

This work demonstrates arc generation and anodic film formation behaviors on Al1050 alloy during PEO (plasma electrolytic oxidation) treatment under a constant direct current in an alkaline electrolyte containing silicate, carbonate and borate ions. Only one big arc more than 2 mm diameter was generated first at the edges and it was moving on the fresh surface or staying occasionally at the edges, resulting in the local burning due to generation of an extremely big orange colored arc at the edges. Central region of the flat surface was not fully covered with PEO films even after sufficiently long treatment time because of the local burning problem. The anodic oxides formed on the flat surface by arcing once were found to consist of a number of small oxide nodules with spherical shape of $3{\sim}6{\mu}m$ size and irregular shapes of about $5{\sim}10{\mu}m$ width and $10{\sim}20{\mu}m$ length. The anodic oxide nodules showed uniform thickness of about $3{\mu}m$ and rounded edges. These experimental results suggest that one big arc observed on the specimen surface under the application of a constant direct current is composed of a number of small micro-arcs less than $20{\mu}m$ size.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.3
• /
• pp.29-35
• /
• 2007

Titanium was oxidized with oxygen plasma and calcinated with rapid thermal annealing for degradation of humic acid dissolved in water. Titania photocatalytic plate was produced by titanium surface oxidized with oxygen plasma by Plasma Enhanced Chemical Vapor Deposition (PECVD). RF-power and deposition condition is controlled under 100 W, 150 W, 300 W and 500 W. Treatment time was controlled by 5 min and 10 min. The film properties were evaluated by the X-ray Photoelectron Spectroscopy (XPS) and X-Ray Diffraction (XRD). From the experimental results, we found the optimal condition of titania film which exhibited good performance. Moreover photocatalytic capacity was about twice better than thermal spray titania film, and also as good as titania powder.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.4
• /
• pp.151-157
• /
• 2014

The degradation mechanisms of thermal barrier coatings (TBCs) were investigated in different thermal fatigue condition in terms of microstructural analyses. The isothermal and cyclic oxidation tests were conducted to atmospheric plasma sprayed-TBCs on NIMONIC 263 substrates. The delamination occurred by the oxide layer formation at the interface, the Ni/Cr-based oxide was formed after Al-based oxide layer grew up to ${\sim}10{\mu}m$ in the isothermal condition. In the cyclic oxidation with dwell time, the failure occurred earlier (500 hr) than in the isothermal oxidation (900 hr) at same temperature. The thickness of Al-based oxide layer of the delaminated specimen in the cyclic condition was ${\sim}4{\mu}m$ and the interfacial cracks were observed. The acoustic emission method revealed that the cracks generated during the cooling step. It was considered that the specimens were prevented from the formation of the Al-based oxide by cooling treatment, and the degradation mode in the cyclic test was dominantly interfacial cracking by the difference of thermal expansion coefficients of the coating layers.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2004.11a
• /
• pp.265-270
• /
• 2004

Coronary heart disease (CHD) has been the number one killer in western society for a long time, and CHD in most instances is due to atherosclerosis. One of the earliest events in atherogenesis is the intracellular accumulation of lipids, particularly cholesterol esters, in the aortic intima. The lipids presumably came from the uptake of plasma lipoproteins, particularly from LDL. These foam cells were identified as being predominantly as macrophages. Currently, it is believed that oxidation of low density lipoprotein (LDL) might contribute to the generation of foam cells. An outcome of the oxidation hypothesis is that the consumption of antioxidants would be beneficial. In this study, Boldine, an alkaloid of Peumus boldus was tested for their antioxidant potency both in, in vitro oxidation system and in mouse models. Boldine decreased the ex-vivo oxidation of Low-density lipoprotein (LDL). In vivo studies were performed to study the effect of these compounds on the atherosclerotic lesion formation in LDL r-/- mice. Three groups of LDL r-/- mice (N=12 each) were fed an atherogenic diet. Group 1 was given vehicle and group 2 and 3 were given 1 and 5 mg of Boldine/day in addition to the atherogenic diet. The results indicated that there was a decrease in lesion formation reaching a 40% reduction due to Boldine compared to controls. The in vivo tolerance of Boldine in humans (has been used as an herbal medicine in other diseases) should make it an attractive alternative to vitamin E.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2022

Long-chain fatty acid oxidation disorders (LC-FAOD) are an autosomal recessive inherited rare disease group that result in an acute metabolic crisis and chronic energy deficiency owing to the deficiency in an enzyme that converts long-chain fatty acids into energy. LC-FAOD includes carnitine palmitoyltransferase type 1 (CPT1), carnitine-acylcarnitine translocase (CACT), carnitine palmitoyltransferase type 2 (CPT2), very long-chain acyl-CoA dehydrogenase (VLCAD), long-chain 3-hydroxyacyl-CoA dehydrogenase (LCHAD), and trifunctional protein (TFP) deficiencies. Common symptoms of LC-FAOD are hypoketotic hypoglycemia, cardiomyopathy, and myopathy. Depending on symptom onset, the disease can be divided as neonatal period, late infancy and early childhood, adolescence, or adult onset, but symptoms can appear at any time. The neonatal screening test (NBS) can be used to identify the characteristic plasma acylcarnitine profiles for each disease and confirmed by deficient enzyme analysis or molecular testing. Before introduction of NBS, the mortality rate of LC-FAOD was very high. With NBS implementation as routine neonatal care, the mortality rate was dramatically decreased, but severe symptoms such as rhabdomyolysis recur frequently and affect the quality of life. Triheptanoin (Dojolvi^®), the first drug for pediatric and adult patients with molecularly confirmed LC-FAOD, has recently been approved by the US Food and Drug Administration in 2020. In this review, the diagnosis of LC-FAOD and treatment including triheptanoin are summarized.

• Journal of Korean Medicine Rehabilitation
• /
• v.21 no.2
• /
• pp.49-62
• /
• 2011

Objectives : This study was designed to examine the effects of Polygonatum odoratum EtOH ext. on lowering lipid and anti-oxidation using hyperlipidemic rat. Methods : Male rats weighting $195.21{\pm}4.93g$ were divided into 4 groups and fed high fat diet for 8 weeks. Each of 7 rats was divided into a control and sample group. We fed a control group of rats a basal diet and administered normal saline(100 mg/kg, 1 time/1 day) for 4 weeks. And we fed each experimental group of rats basal diet and administered an extract of Polygonatum odoratum(100 mg/kg, 200 mg/kg, 300 mg/kg, 1 time/1 day) for 4 weeks. At the end of the experiment, the rats were sacrificed to determine their chemical composition. We measured lipid of plasma and liver, concentration of anti-oxidative activity and tumor necrosis factor-$\alpha$($TNF-{\alpha}$). Results : 1. Concentration of plasma free fatty acid, low density lipoprotein-cholesterol showed a significant decrement in the 200 mg/kg and 300 mg/kg Polygonatum odoratum EtOH ext. groups than that of control group. Concentration of plasma total cholesterol, triglyceride showed a significant decrement in all Polygonatum odoratum EtOH ext. groups than that of control group. However, concentration of plasma high density lipoprotein-cholesterol was not significantly different in all the treatment groups. 2. Concentration of liver total cholesterol showed a significant decrement in the 200 mg/kg and 300 mg/kg Polygonatum odoratum EtOH ext. groups than that of control group. Concentration of liver triglyceride(TG) showed a significant decrement in all Polygonatum odoratum EtOH ext. groups than that of control group. 3. Concentration of plasma thiobarbituric acid reactive substance, and liver thiobarbituric acid reactive substance showed a significant decrement in the 200 mg/kg and 300 mg/kg Polygonatum odoratum EtOH ext. groups than that of control group. 4. The values of glutathione peroxidase activity showed a significant increment in all Polygonatum odoratum EtOH ext. groups than that of control group. The values of superoxide dismutase activity and catalase activity showed a significant increment in the 200 mg/kg and 300 mg/kg Polygonatum odoratum EtOH ext. groups than that of control group. 5. The values of plasma aspartate aminotransferase and alanine aminotransferase activities were not significantly different in all treatment groups. 6. Concentration of liver $TNF-{\alpha}$ showed a significant decrement in the 200 mg/kg and 300 mg/kg Polygonatum odoratum EtOH ext. groups than that of control group. Conclusions : Based on the results in this study, the Polygonatum odoratum EtOH ext. showed a positive effect in lowering lipid and anti-oxidation.