• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.278-280
• /
• 1994

The purpose of this paper is to describe an application of plasma polymerized thin film as an electron beam resist. Plasma polymerized thin film was prepared using an interelectrod inductively coupled gas-flow-type reactor. Styrene was chosen as the monomer to be used. This thin films were also delineated by the electron-beam apparatus and the pattern in the resist was developed with RIE and plasma polymerized apparatus. The effect of charge of pressure on growth rate and etching rate of the thin films were studied. The molecular structure of thin film was investigated by FT-IR and then was discussed in relation to its quality as a resist.

• Applied Science and Convergence Technology
• /
• v.26 no.6
• /
• pp.189-194
• /
• 2017

Effects of gas injection scheme and rf driving current configuration in a dual turn inductively coupled plasma (ICP) system were analyzed by 3D numerical simulation using CFD-ACE+. Injected gases from a tunable gas nozzle system (TGN) having 12 horizontal and 12 vertical nozzles showed different paths to the pumping surface. The maximum velocity from the nozzle reached Mach 2.2 with 2.2 Pa of Ar. More than half of the injected gases from the right side of the TGN were found to go to the pump without touching the wafer surface by massless particle tracing method. Gases from the vertical nozzle with 45 degree slanted angle soared up to the hottest region beneath the ceramic lid between the inner and the outer rf turn of the antenna. Under reversed driving current configuration, the highest rf power absorption region were separated into the two inner islands and the four peaked donut region.

• Journal of the Korean Physical Society
• /
• v.73 no.9
• /
• pp.1399-1404
• /
• 2018

This study used an inductively coupled plasma (ICP) dry etching process with a metal amplitude mask to fabricate a double-side notched long-period fiber grating (DNLPFG) for loading sensing. The DNLPFG exhibited increasing resonance attenuation loss for a particular wavelength when subjected to loading. When the DNLPFG was subjected to force loading, the transmission spectra were changed, showing a with wavelength shift and resonance attenuation loss. The experimental results showed that the resonant dip of the DNLPFG increased with increasing loading. The maximum resonant dip of the $40-{\mu}m$ DNLPFG sensor was -26.522 dB under 0.049-N loading, and the largest force sensitivity was -436.664 dB/N. The results demonstrate that the proposed DNLPFG has potential for force sensing applications.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2007.11a
• /
• pp.47-47
• /
• 2007

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.04a
• /
• pp.134-134
• /
• 2006

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.375-378
• /
• 1998

Platinum thin film which hardly form volatile compounds with any reactive gas at normal process temperature was etched in inductive coupled BCl$_{3}$/Cl$_{2}$ plasma. The etch rate of platinum thin film increased with increasing Cl$_{2}$/(Cl$_{2}$ + BCl$_{3}$) ratio. That reasoned increasing of ion current density.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2003.02a
• /
• pp.216-216
• /
• 2003

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1432-1433
• /
• 2007

반도체 제조공정에서 널리 쓰이고 있는 플라즈마 에칭프로세스는 기판의 물질을 선택적으로 제거할 때 사용하는 방법이다. 컴퓨터 시뮬레이션을 이용하여 플라즈마 에칭공정을 예측하기 위한 많은 노력이 행하여져 왔다. 그러나 많은 연구에서 플라즈마와 쉬스영역을 따로 모델링하거나 PIC-MC 방법을 이용하였다. 본 논문에서는 반도체 에칭 공정에 사용되는 플라즈마와 플라즈마 쉬스를 상용 코드인 Multiphysics를 사용하여 동시에 시뮬레이션하고 실험결과와의 일치성을 보이고자 한다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.4
• /
• pp.131-138
• /
• 2024

In this study, the microstructure and plasma resistance characteristics of 35Bi₂O₃-15Al₂O₃-50SiO₂ (BiAl SiO) and 35Bi₂O₃-7.5Al₂O₃-50SiO₂-7.5AlF₃ (BiAlSiOF) glass layers coated on sintered alumina substrates were investigated according to the sintering conditions. The coated layers were formed using the bar coating method and then sintered at a temperature in the range of 700~900℃, which corresponds to the temperature before and after the hemisphere forming temperature, after a debinding process. The plasma resistance of the two coated glasses was approximately 2~3 times higher than that of the quartz glass, and in particular, the BiAlSiOF glass film with F added showed higher plasma resistance than BiAlSiO. It is thought to be due to the effect of suppressing the reaction with fluorine gas by adding fluorine to the glass. When the sintering time was increased at 700℃ and 800℃, the plasma resistance of both glasses improved, but when the sintering temperature was increased to 900℃, the plasma resistance decreased again (i.e., the etching rate increased). This phenomenon is thought to be related to the crystallization behavior of both glasses. The change in plasma resistance depending on the sintering conditions is thought to be related to the appearance of Al and Bi-rich phases.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.76-79
• /
• 2005

Dry etching of NiFe, NiFeCo, and Ta for magnetic random access memory (MRAM) by inductively coupled plasmas (ICPs) of $Cl_2/Ar$ has been carried out. NiFe and NiFeCo showed maximum etch rates at a particular ICP source power, but the etch rate of Ta increased with the ICP source power. The etch rates of the magnetic thin films increased with the RF chuck power, but decreased with the operating pressure and the $Cl_2$ concentration. To avoid a corrosion problem by chlorine, the etched samples were rinsed with de-ionized water for 5 minutes after etching. The etch profile showed a clean and smooth surface at 50% $Cl_2$ concentration.