• Journal of the Korean Society of Safety
• /
• 제13권3호
• /
• pp.102-111
• /
• 1998

This study was concerned with the development of a heavy duty rust-converting agent, the function of which is to form metal complex coatings, containing vinyl halide-acrylic terpolymer emulsion, defoamer, emulsifying agent, glass flakes, chelating agent such as gallotannic acid, gallic acid, and pyrogallic acid, and other additives. The resulted emulsion products(Sample No.1~No.5) were characterized through test either in the forms of emulsions, which include Viscosity, Penetration rate, Acidity and Film drying rate test, or in the forms of coated layer on rusty steel substrates by FT-IR, which include hardness, gloss, salt spray, adhesion and flame retardant test. The test results are as follows ; Penetration rate(0.1~0.4 mm/min), Solid content(70%), Acidity (pH 1.8~2.0), Specific gravity(1.30~1.35), Film drying rate(108min, RH 40% ; 150min, RH 80%), Gloss(83~92, incident angle $60^{\circ}$; 88~97, incident angle $85^{\circ}$), Pencil hardness(4H~5H), Adhesion (100/100), Salt spray test(>720Hr), LOI(%) value(38%), Vertical burning test(UL 94-v-l). According to the various performance of specimens show above, the evaluation of the availability of this heavy duty rust-converting agent can be concluded that all the samples(No.1~No.5) are capable of being used in the field of chemical plant and in the hazard areas of fire and explosion potential. It was observed that the properties of sample No.2, especially gloss and hardness, were much better than that of the other samples.

• Journal of the Korean Magnetic Resonance Society
• /
• 제23권4호
• /
• pp.93-97
• /
• 2019

Black ginger (Kaempferia parviflora) is a short-lived ginger plant with dark purple colored root and is known to be effective in treating diabetes and obesity. To find out the difference in the characteristics of the black ginger according to the variety of production, 1D proton NMR experiments were performed on 4 types of black gingers from different regions. The NMR spectra of all black ginger showed the characteristic peaks of the polymethoxy flavone compounds, and the chemical shifts and intensity of peaks showed slight differences depending of the type of black ginger implying the difference in molecular environment. These initial NMR experiments can be applied to the identification of the diversity of black ginger in physiological function according to the climate of regions using SNIF-NMR (Site-specific Natural Isotope Fractionation studied by NMR).

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.683-689
• /
• 2018

To evaluate equipment survivability of the polymer Viton, used in sealing materials, the effects of its thermal degradation were investigated in severe accident (SA) environment in a nuclear power plant. Viton specimens were prepared and thermally degraded at different SA temperature profiles. Changes in mechanical properties at different temperature profiles in different SA states were investigated. The thermal lag analysis was performed at calculated convective heat transfer conditions to predict the exposure temperature of the polymer inside the safety-related equipment. The polymer that was thermally degraded at postaccident states exhibited the highest change in its mechanical properties, such as tensile strength and elongation.

• Journal of the Korean Society for Nondestructive Testing
• /
• 제34권2호
• /
• pp.119-127
• /
• 2014

An epoxy coating applied to the concrete surface of a containment building deteriorates in hazardous environments such as those containing radiation, heat, and moisture. Unlike metals, the epoxy coating on a concrete liner absorbs and discharges moisture during the degradations process, so it has a different density and volume during service. In this study, acoustic impedance was adopted for characterizing the degradation of a glass-reinforced epoxy coating using the acoustic reflection coefficient (reflectance) on a rough epoxy coating. For estimating the acoustic reflectance on a wavy epoxy coating surface, a probabilistic model was developed to represent the multiple irregular reflections of the acoustic wave from the wavy surface on the basis of the simulated annealing technique. A number of epoxy-coated concrete specimens were prepared and exposed to accelerated aging conditions to induce an artificial aging degradation in them. The acoustic impedance of the degraded epoxy coating was estimated successfully by minimizing the error between a waveform calculated from the mathematical model and a waveform measured from the surface of the rough coating.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2304-2311
• /
• 2021

The dislocation density in strain-hardened Alloy 690 was analyzed using scanning transmission electron microscopy (STEM) to study the relationship between the local plastic strain and susceptibility to primary water stress corrosion cracking (PWSCC) in nuclear power plants. The test material was cold-rolled at various thickness reduction ratios from 10% to 40% to simulate the strain-hardening condition of plant components. The dislocation densities were measured at grain boundaries (GB) and in grain interiors of strain-hardened specimens from STEM images. The dislocation density in the grain interior monotonically increased as the strain-hardening proceeded, while the dislocation density at the GB increased with strain-hardening up to 20% but slightly decreases upon further deformation to 40%. The decreased dislocation density at the GB was attributed to the formation of deformation twins. After the PWSCC growth test of strain-hardened Alloy 690, the fraction of intergranular (IG) fracture was obtained from fractography. In contrast to the change in the dislocation density with strain-hardening, the fraction of IG fracture increased remarkably when strain-hardened over 20%. From the results, it was suggested that the PWSCC growth behavior of strain-hardened Alloy 690 not only depends on the dislocation density, but also on the microstructural defects at the GB.

• The Korean Journal of Mycology
• /
• 제47권2호
• /
• pp.95-104
• /
• 2019

The genus Ochrolechia is a widespread, lichen genus in Korea. Despite being common, little is known about the species diversity and geographical distribution of Ochrolechia. In this study, we detailed the identification procedure of the genus Ochrolechia in a Korean collection and provided the description of each species. Using 104 specimens collected from 2003 to 2017, we identified four species of the genus Ochrolechia via morphological and/or molecular phylogenetic analysis: O. parellula, O. trochophora, O. yasudae and O. akagiensis. Among them, O. akagiensis had not been previously reported in Korea. Moreover, the species identified as O. frigida and O. tartarea in past studies were corrected as O. yasudae and O. parellula, respectively, based on morphological and/or molecular evidence. Phylogenetic analysis using the internal transcribed spacer regions including 5.8S rRNA gene showed that the four species separated clearly, indicating that the morphological identification corresponds to the phylogenetic identification. We provide a taxonomic key for the four species of the genus Ochrolechia.

• Nuclear Engineering and Technology
• /
• 제54권1호
• /
• pp.357-373
• /
• 2022

The high-temperature gas-cooled reactor pebble-bed module project is the first commercial Generation-IV NPP(Nuclear Power Plant) in China. A new joint is used for the vertical support of RPV(Reactor Pressure Vessel). The steel corbel is integrally embedded into the reactor-cabin wall through eight asymmetrically arranged pre-stressed high-strength bolts, achieving the different path transmission of shear force and moment. The vertical monotonic loading test of two specimens is conducted. The results show that the failure mode of the joint is bolt fracture. There is no prominent yield stage in the whole loading process. The stress of bolts is linearly distributed along the height of corbel at initial loading. As the load increases, the height of neutral axis of bolts gradually decreases. The upper and lower edges of the wall opening contact the corbel plate to restrict the rotation of the corbel. During the loading, the pre-stress of some bolts decreases. The increase of the pre-stress strength ratio of bolts has no noticeable effect on the structure stiffness, but it reduces the ultimate bearing capacity of the joint. A simplified calculation model for the elastic stage of the joint is established, and the estimation results are in good agreement with the experimental results.

• Parasites, Hosts and Diseases
• /
• 제60권3호
• /
• pp.207-211
• /
• 2022

This study aimed to examine the distribution of gastrointestinal parasitic infections in domestic pigs in the Republic of Korea. From May 2020 to October 2021, 364 pig fecal samples were collected from 75 farms in 7 Provinces and microscopically examined. A total of 170 (46.7%) pigs were infected with at least one of the following parasites: Balantioides coli, strongyles, Ascaris suum, Trichuris suis, and coccidia. By parasite species, B. coli, strongyles, A. suum, T. suis, and coccidia oocysts or eggs were detected in 144 (39.6%), 24 (6.6%), 14 (3.8%), 4 (1.1%), and 1 (0.3%) samples, respectively. One hundred fifty-four, 15, and 1 cases showed single, double, and triple infections, respectively. Of the swine fecal samples from 75 farms, 69 specimens (92.0%) were infected with 1 or more parasites. All surveyed farms across the country exhibited a positive rate of over 30%, among which the highest positive rate was 65.0% in Chungcheongnamdo, and Jeollabuk-do was followed by 61.9%. Winter showed a statistically lower prevalence than other seasons. This study showed that gastrointestinal parasites are prevalent in pigs in Korea, although the diversity of parasites is low.

• Journal of the Korean Society for Precision Engineering
• /
• 제14권11호
• /
• pp.69-76
• /
• 1997

The rotating bending fatigue tests were performed using the specimens taken from Cr-Mo-V steel, widely sued in thermal power plant turbines, at various temperatures such as room temperature, 300 .deg. C, 425 .deg. C and 550 .deg. C. The characteristics of fatigue crack propagation were examined and analyzed by using fracture mechanics parameter. The plastic replica method was also applied in order to measure the crack length on the basis of serial observation of fatigue crack propagation behavior on the defected specimen surface. The fatigue crack propagation behavior of Cr-Mo-V steel was investigated within the frame work of elastic-plastic fracture mechanics. The propagation law of fatigue crack is obtained uniquely by using the term .sigma. $^{n}$ sub a/where .sigma. $_{a}$ is the service stress, a is the crack length and n is a constant. The values of constant n are nearly equal to 2.48, 2.60 and 8.61 at room temperature, 300 .deg. C and 425 .deg. C.

• Journal of Environmental Science International
• /
• 제32권11호
• /
• pp.811-820
• /
• 2023

This study investigated the protective effects of shade nets on Abies koreana seedlings subjected to high temperature and luminosity stress, which are pertinent for plant survival in climate change scenarios. This study, conducted at Konkuk University, compared the growth, survival, and soil conditions of 3-year-old specimens across natural, greenhouse, and shaded settingsfrom July to September 2022. Our findings demonstrated that shade nets significantly enhanced seedling survival by moderating soil temperature and moisture. This is particularly evident in high-temperature conditions, where shade nets mitigate stress on seedlings and safeguard them from excessive sunlight exposure. Proper net installation height and location are crucial for optimal temperature and humidity control, suggesting broader applicability for various species and offering strategies to combat the ecological impacts of climate change.