• Korean Journal of Medicinal Crop Science
• /
• v.2 no.1
• /
• pp.14-19
• /
• 1994

Elephant food(Amorphophallus konjac K.) have been utilized its tubers in workedmaterials for a health and diet food. The author supposed that it was increased the area of cultivation and demand. This experiments were conducted to select the proper covering material during winter in order to increase yield of tubers and decrease input by 2 year's continuous cultivation, also to verified ability of seed germination and to measured efficiency of photosynthesis of plant. The proper covering materials for wintering were rice straw and rice hull. These materials were covered at 5 cm thick and at field was promoted according to emergence appearing after winter. The yields were 5,790kg /10a at 4,730kg /10a, respectively. Yield increase was 120% and 80% than that of control. The seeds collected at August 22 were germinated about 84 percent, and it was not necessary to treatment of low temperature or germination-accelerated chemicals. The widest leaf area was ranged $1,218-1,438cm^2$ at October 20 and was varied. The efficiency of photosynthesis was highest at 65-95 days after leaf emergence. The line of broad leaf and high photosynthetic efficiency per unit area was greater compare with yield. Therefore, it was supposed that these characteristics will use a marker for selection for high-yielding lines.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.439-444
• /
• 2009

This study was to set the guidelines of soil chemical components in order to assure the safety and quality of the panax ginseng from physiological disorder. The disorder symptoms appeared on the leaf with yellow spot, atrophy, yellow-brown spot, also showed red skin and rough skin of the root. Occurrence type of physiological disorder in cultivated field divided into two types : type I 'such as, yellow spot' consist of single disorder symptom; type II 'such as, yellow spot and yellow-brown spot' consist of two or more different disorder symptoms. The individual contribution of soil properties to the occurrence type was as follows ; The yellow spot was affected by Na > $NO_3$-N > salinity (EC) in soil. The same results was observed in red skin. Atrophy was affected by $NO_3$-N > salinity (EC) > Ca > Mg. Rough skin was affected by $P_2O_5$>pH>Organic material > K. It showed positive associated to $P_2O_5$, pH and K, but negative associated to organic matter. Simultaneous occurrence of two different disorder, including cases which yellow spot and yellow-brown spot, those were affected by $NO_3$-N > salinity (EC) > Na > Mg. In the case of atrophy plus yellow-brown spot, those also were affected by in the order : $NO_3$-N > salinity (EC) > Ca > Mg > Na. Red-rough skin was affected in the order : salinity (EC) > $NO_3$-N > K > Na. Soil chemical components appear to be related to occurrence of physiological disorder, particularly in salinity (EC) and $NO_3$-N. The salinity (EC) and $NO_3$-N were negative related to plant growth. In addition, exchangeable cation capacity play critical roles in attributing to complex occurrence of physiological disorder.

• Archives of design research
• /
• v.17 no.4
• /
• pp.97-106
• /
• 2004

Oukjuk becomes to known to the people and valuates due to the importance of the effect of the medicine. Known as taoist hermit plant, Oukjuk tea has called as a Solomon's Seal Tea in the western countries. Dissimilarly from other herb teas, it contains a high percentage of minerals. Because of the utility value of this, people used to use Oukjuk as an oriental medical treatment for various kinds of the condition of illness as for nutritive food or tonic material. According to the records, a sage of old or people seeking after truth had enjoyed the tea very much. In spite of these all effects, public has only a superficial understanding of the matter, Comprehending the problems, this study analyses ways and means of the functional packaging for the Solomon's Seal tea. In this research, the most problems came out with the quality of the products and the level of their packaging which is not variously in forms and not properly developed in materials and designs. As a conclusion the paper pointed out the importance of keeping the traditional high quality in product and having an appeal to packaging for customer's needs.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.855-859
• /
• 2011

The main pollutants from zirconium alloy tubing manufacturing process in nuclear industry are nitrate ($NO_3-N$) and fluoride (F-)Nitric acid, and hydrofluoric acid is used for acid pickling. The process for the removal of nitrate and fluoride is composed of 1st chemical coagulation, SOD (Sulfur Oxidation Denitrification) process using sulfur-oxidizing denitrification, and 2nd chemical coagulation. The characteristic of the wastewater treatment is an application of SOD process. The SOD Process is highly received attention because it is significantly different from existing processes for sulfur denitrification. A JSC (JeonTech-Sulfur- Calcium) Pellet is unification of sulfur and alkalinity material. According to result of SOD process in wastewater treatment plant, the removal efficiency of T-N was over 91% and the average concentration of T-N from influent was 147.55 mg T-N/L and that from effluent was 12.72 mg T-N/L. Therefore, SOD process is a useful to remove nitrogen from inorganic industrial wastewater and a new development of microbial activator was shown to be stable for activation of autotrophic bacteria.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.46-51
• /
• 2015

BACKGROUND: This study aimed at investigating the effects of sulfur-containing compounds widely used as environment-friendly organic fungicides against ginseng anthracnose, and determining the appropriate application concentration for lowering chemical injury to ginseng leaves. Ginseng anthracnose, caused by Colletotrichum gloeosporioides, is a destructive disease that significantly reduces the yield of ginseng. METHODS AND RESULTS: Ginseng anthracnose, caused by Colletotrichum gloeosporioides, is a destructive disease that significantly reduces the yield of ginseng. In a 2-year-old ginseng grown in a pot, treatment with loess-sulfur complex containing 0.06% sulfur and fermented loess-sulfur complex containing 0.13% sulfur did not show any chemical injuries. In order to measure the therapeutic effectiveness, various sulfur-containing compounds were applied to the plants after they were infected with ginseng anthracnose. Treatment with lime sulfur complex (400 dilution) showed the highest ginseng anthracnose control value, followed by fermented loess-sulfur complex (20 dilution), fermented loess-sulfur complex (40 dilution), and loess-sulfur complex (400 dilution) treatments. These compounds were applied before the outbreak of anthracnose disease in order to measure the preventive effectiveness, and in this case, treatment with fermented loess-sulfur complex (40 dilution) showed the highest control value and it was comparable to the value of the pesticide treatment used as the control in this experiment. CONCLUSION: Fermented loess-sulfur complex could be recommended as an environment-friendly organic material to control the occurrence of ginseng anthracnose.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.709-716
• /
• 2016

Recently, the operating conditions of the various mechanical structures have become more severe and the running time has become longer as the development of plant equipment increases with the introduction of high technology. Thus, the reliability of the system and its accessories is becoming a problem. Normally, synthetic natural gas (SNG) plants use 1.25Cr-0.5Mo or 2.25Cr-1Mo heat resistant steel according to the operating conditions. In this study, a lab-scale reactor was set up using 1.25Cr-0.5Mo steel, in order to carry out corrosion tests for producing synthetic natural gas. The corrosive characteristics were investigated under 1st-methanator operating conditions and fundamental data about the durability and reliability were obtained by using the experimental test. The analysis of results obtained on the durability of the reactor under emission and injection compositions showed that the hydrogen embrittlement caused by hydrogen and the oxidation corrosion caused by H2O had the most effect on the durability of 1.25Cr-0.5Mo steel in the SNG reactor. However, the hydrogen embrittlement and oxidation corrosion occurred simultaneously under emission conditions, so that the corrosion of the material increased suddenly after a long operating time. Besides, the corrosion of the 1.25Cr-0.5Mo steel under the injection composition was faster than that under the emission composition.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.39-50
• /
• 2009

Portland cement production is under critical review due to high amount of $CO_2$ gas released to the atmosphere. Attempts to increase the utilization of fly ash, a by-products from thermal power plant to partially replace the cement in concrete are gathering momentum. But most of fly ash is currently dumped in landfills, thus creating a threat to the environment. Many researches on alkali-activated concrete that does not need the presence of cement as a binder have been carried out recently. Instead, the source of material such as fly ash, that are rich in Silicon(Si) and Aluminium(Al), are activated by alkaline liquids to produce the binder. Hence concrete with no cement is effective in the reduction of $CO_2$ gas. In this study, we investigated the influence of the compressive strength of mortar on alkaline activator and curing condition in order to develop cementless fly ash based alkali-activated concrete. In view of the results, we found out that it was possible for us to make alkali-activated mortar with 70MPa at the age of 28days by using alkaline activator manufactured as 1:1 the mass ratio of 9M NaOH and sodium silicate and applying the atmospheric curing after high temperature at $60^{\circ}C$ for 48hours.

• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.51-55
• /
• 2010

The global activities to reduce the $CO_2$ emission as a greenhouse gas have been various efforts. Under this circumstance, small and medium sized gas field containing $CO_2$ to develop as LNG is not economic feasibility. Particularly, for the separation of $CO_2$ in gas field, separation facilities should be installed to add. This is and increase in plant construction cost and separated $CO_2$ emission into the atmosphere is not the result of greenhouse gas reduction. When the uneconomic gas field apply the KOGAS DME process, the gas field containing $CO_2$ can be increase economic feasibility because of natural gas and $CO_2$ can be use to resource gas. The Tri-reformer produced syngas as H2 and CO in KOGAS DME process and the resource gases are natural gas, steam, oxygen and $CO_2$. The $CO_2$ is used as raw material gases from recover $CO_2$ in DME process. In this study, we investigated range of application of $CO_2$ in gas field.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.130-137
• /
• 2012

This study has conducted to develop new gabion wall systems with vegetation base materials for stream bank stability and rapid rehabilitation. Vegetation base materials are primarily compounded with fine soil, organic composts and peat moss as plant fibers, a water retainer and a soil improver. Normally gabion wall systems resist the lateral earth pressures or stream power by their own weight. Therefore, fill material must have suitable weight, compressive strength and durability to resist the loading, as well as the effects of water and weathering. In this project, 100 to 200-mm clean, hard stones are basically specified, and about 50-mm rubbles are also used. Test application of new gabion wall system carried out in the stream bank of a small stream in the Gwangreung experimental forest, belonging to Korea Forest Research Institute (KFRI) in December 16th, 2006. As a result of the analysis of hydraulic stability of new gabion wall system, gabion wall system has highest threshold shear stress when the gabion wall covered by vegetation. New gabion wall system is highly resistant to sliding and overturning because safety coefficients exceed 1.5. As a result of term of slope stability analysis of new gabion wall system by Bishop and Fellenius methods, stability of stream bank was highly increased after the construction of gabion wall. Therefore, new gabion wall system is effective to stabilize unstable stream bank.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.335-343
• /
• 2002

Methods of bedsoil analysis were difficult to be applied universally because use and material of bedsoil are diverse from country to country. Korean Standard Methods for Bedsoil Analysis was developed to measure the water content, water retention, and saturated hydraulic conductivity. Fifty-three samples for horticultural bedsoil and nine samples for paddy rice bedsoil in the current market were collected. Water content of bedsoil was determined using gravimetric method through $105^{\circ}C$ oven-dry for 16 hours, but different calculations between horticultural and paddy rice bedsoils were chosen according to different predominant component, plant residue or mineral. Water content percentage of horticultural bedsoil was calculated as [(weight of sample before oven-dry - weight of sample after oven-dry)/(weight of sample before oven-dry)]${\times}100$, while that of paddy rice bedsoil as [(weight of sample before oven-dry - weight of sample after oven-dry)/(weight of sample after oven-dry)]${\times}100$. Water retention was measured at water potential -0.5, -1, -3, -5, -7, -10 kPa by Sandbox method and saturated hydraulic conductivity was measured by constant head method using acryl cylinder (${\Phi}5cm{\times}L\;20cm$). By new 'Korean Standard Methods of Bedsoil Analysis', the average water content of horticultural bedsoil was obtained 46.34%(w/w) and that of paddy rice bedsoil 16.89%. For horticultural bedsoil, easily available water(EAW), water buffering capacity(WBC), and optimal matric potential(OMP) was estimated at 28.4%, 7.01%, and -5.60 kPa, respectively. Optimal moisture content was 44.41% and average saturated hydraulic conductivity for bedsoils was estimated at $28.4cm\;min^{-1}$.