• Journal of the Korean Dietetic Association
• /
• v.2 no.2
• /
• pp.123-140
• /
• 1996

The purpose of this study was to examine financial management practices in elementary school foodservices. Respondents were asked to provide information on demographics, operational characteristics, financial management activities(responsibility, importance and time demand). Data were collected from 106 elementary school foodservice using the mail questionnaire. The results were as follows 1. Time demand of 14 financial management activities was examined. The results of time-demand showed that most financial activities were performed about once per month. Reporting, inventory checking and production cost accounting were performed several times per week. 2. Major financial management activities performed by school dietitians were inventory checking, record keeping, production cost accounting, and foodservice operation planning. 3. Results of the importance rating of 14 financial management activities showed that the production cost accounting, budgeting, controlling meal costs, reporting the national treasury accounts, and inventory checking were rated as very important(4.00-4.49). Factor analysis was conducted on the importance ratings. Five activities were differentiated such as budgeting, record keeping, cost controlling, cost accounting, and reporting. The cost controlling task was identified at the most important one among them. 4. Important ratings for reporting were found to be significantly different by age, and years of experience. The younger and the less experienced were responded with higher scores on reporting. Analysis of variance for the importance scales by meal costs per one person, food cost percentage, labor cost percentage was conducted, but significant differences were not founded.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.281-293
• /
• 2011

Server consolidation and virtualization have become an integral part of IT planning to reduce TCO cost and ensure the high availability for customer, enlarge the flexibility to computing resource in today' enterprise data centers. In spite of having the variety advantages of server consolidation and virtualization, they cause many problems such as the software licensing issues, virtual server sprawl, network complexity issues, hardware start-up costs, and failover costs. In particular, software licensing problem brings about the serious results in operating of data center and also presents a significant challenge to virtualization because many vendors have realized that licensing policies applicable to physical systems are not compatible with virtual machines. So, the IT planers must be considering this problem before they conducts the server consolidation and virtualization. In this paper, we proposed the efficiency strategy of SW licensing for server consolidation and virtualization analyzing the N-Datacenter case in Korea. As a result, we suggest the two strategies as technical and management/contract aspect. First, as the technical aspect, we propose i) the adaptation of suitable licensing for virtualization, ii) differentiation of license according to the characteristics of server, iii) the core distribution of licenses to minimizing. Second, as the management/contract aspect, we suggest following three things. i) The existing license agreement is changed to the right licensing for virtualization. ii) The license agreement is contracts the active focused. iii) When a new contract should be added to virtualization provisions.

• Journal of the Korean Professional Engineers Association
• /
• v.34 no.1
• /
• pp.53-58
• /
• 2001

Value Engineering (VE) is an organized process with an impressive history of improving value and quality. VE can be applied to the construction projects with having good study results. The VE study in construction projects gives identification of opportunities to remove unnecessary costs while assuring quality, performance, reliability, and other factors will meet or exceed the clients needs. VE techniques can save money, reduce time, and improve quality, reliability, maintainability, and performance. VE can also make improving of human factors (altitudes, creativity), and team work. According to the results of VE study in recent USA, 5∼35% reduction in initial costs have been made for the construction projects (ROI ranges : 100∼1000). To have successful work results, if possible, VE study shall be considered at project planning stage or basic design stage later than field work stage with application of VE JOB PLAN, multi-disciplinary approach, and proper techniques in respective study phases (pre-workshop / information gathering / function analysis / creativity / judgement and evaluation / development / presentation and implementation) among the detail techniques in many.

• KIEAE Journal
• /
• v.17 no.4
• /
• pp.67-74
• /
• 2017

Purpose: As the recent climate environment changes so rapidly, environmental problems such as hot weather and fine dust have occurred, and interest in environmental policies and technology development is increasing in countries around the world. Similarly in the Architecture, researches to reduce greenhouse gas emissions and to reduce energy application are actively conducted. Looking at previous studies, it is analyzed that the electric VRF is more energy efficient than the gas engine VRF. However, energy costs have changed due to recent price hikes and discounts on gas charges due to high electricity consumption in summer. Method: In this study, the actual building of Gas Engine VRF system was modeled using SketchUp program, and EnergyPlus was used to simulate actual building. Also, Electric VRF system was simulated, and compared with Gas Engine VRF system. Result: The total secondary energy requirement of Electric VRF system was 19.6% less than that of the Gas Engine VRF system, But when analyzing with primary energy requirement, EHP used 15.8% more energy. CO2 emissions were also estimated to be 16.9% more EHP. Energy costs were 14.8% more in Electric VRF systems, because their electricity charges are 0.6 to 160% more expensive than gas charges.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.9
• /
• pp.4961-4964
• /
• 2013

Greater use of mobile phone devices seems inevitable because the health industry and cancer care are facing challenges such as resource constraints, rising care costs, the need for immediate access to healthcare data of types such as audio video texts for early detection and treatment of patients and increasing remote aids in telemedicine. Physicians, in order to study the causes of cancer, detect cancer earlier, act in prevention measures, determine the effectiveness of treatment and specify the reasons for the treatment ineffectiveness, need to access accurate, comprehensive and timely cancer data. Mobile devices provide opportunities and can play an important role in consulting, diagnosis, treatment, and quick access to health information. There easy carriage make them perfect tools for healthcare providers in cancer care management. Key factors in cancer care management systems through a mobile phone health approach must be considered such as human resources, confidentiality and privacy, legal and ethical issues, appropriate ICT and provider infrastructure and costs in general aspects and interoperability, human relationships, types of mobile devices and telecommunication related points in specific aspects. The successful implementation of mobile-based systems in cancer care management will constantly face many challenges. Hence, in applying mobile cancer care, involvement of users and considering their needs in all phases of project, providing adequate bandwidth, preparation of standard tools that provide maximum mobility and flexibility for users, decreasing obstacles to interrupt network communications, and using suitable communication protocols are essential. It is obvious that identifying and reducing barriers and strengthening the positive points will have a significant role in appropriate planning and promoting the achievements of mobile cancer care systems. The aim of this article is to explain key points which should be considered in designing appropriate mobile health systems in cancer care as an approach for improving cancer care management.

• Journal of Distribution Research
• /
• v.2 no.2
• /
• pp.153-172
• /
• 1997

The distribution sector is affected by a wide range of regulations. Many of these are related to health and safety, others are related to urban planning and environmental issues, whereas some mainly have an economic basis. But, regulations many be unduly restrictive, in which case they can drive up costs and ultimately prices, or they may, in some cases, reduce consumer choice. Unduly restrictive regulations could also increase costs indirectly, by reducing competition and thus lead to lower productivity growth. In the past few years, distribution sector has gone through drastic changes due to deregulation and market opening. Implementation of regulatory reforms served as an opportunity to change laws and systems which had been an obstacle to development of distribution sector. Market opening of distribution sector became a turning point to promote competition among domestic and foreign firms. However, for small and medium scale of the typical retail enterprises which were in no position to compete in terms of prices, additional facilities, and services, faced a threat of diminished trading area, and even of their existence. Because, large firms may have greater market power than small firms, as they can more easily extract favorable terms when procuring goods, and may also be able to deter entry by advertising outlays or access to the best sites. In addition, larger chain stores armied with sufficient capital dominated trading area and reduced customer's welfare by abusing their monopoly power when competing with other shops, and are often cited as an example of adverse effects of local monopoly. In order to minimize such adverse effects and to foster competition, regulatory reforms in distribution sector should set its goal to promote sound and stable distribution activities through market principle and restoring competition principle, and ultimately to boost customers welfare. Therefore, deregulation in distribution sector should be implemented in a way to promote customers welfare, eliminate entry barriers, and expand competition principle such as productivity and efficiency competition. However, it should be also recognized that deregulation of system alone is not enough to develop the distribution sector. To compete in a increasingly concentrated industry, small enterprises increasingly engage in co-operative arrangements, such as buying groups, strategic alliances or franchise agreements.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.3
• /
• pp.77-86
• /
• 2012

We consider the capacitated lot-sizing and scheduling problem for a paper remanufacturing system that produces several types of corrugated cardboards. The problem is to determine the lot sizes as well as the sequence of lots for the objective of minimizing the sum of setup and inventory holding costs while satisfying the demand and the machine capacity over a given planning horizon. In particular, the paper remanufacturing system has sequence-dependent setup costs that depend on the type of product just completed and on the product to be processed. Also, the setup state at one period can be carried over to the next period. An integer programming model is presented to describe the problem. Due to the complexity of the problem, we modify the existing two-stage heuristics in which an initial solution is obtained and then it is improved using a multi-pass interchange method. To show the performances of the heuristics, computational experiments were done using the real data, and a significant amount of improvement is reported.

• Journal of KIBIM
• /
• v.6 no.3
• /
• pp.49-56
• /
• 2016

As project opportunities for the Architecture, Engineering and Construction (AEC) industry have grown more complex and larger, the utilization of Building Information Modeling (BIM) technologies for three-dimensional (3D) design and simulation practices has been increasing significantly; the typical applications of the BIM technologies include clash detection and design alternative based on 3D planning, which have been expanded over to the technology of construction management in the AEC industry for virtual design and construction. As for now, commercial BIM software has been operated under a single-user environment, which is why initial costs for its introduction are very high. Cloud computing, one of the most promising next-generation Internet technologies, enables simple Internet devices to use services and resources provided with BIM software. Recently in Korea, studies to link between BIM and cloud computing technologies have been directed toward saving costs to build BIM-related infrastructure, and providing various BIM services for small- and medium-sized enterprises (SMEs). This study addressed development of the usage metering functions of BIM software under cloud computing architecture in order to archive and use BIM data and create an optimal revenue structure so that the BIM services may grow spontaneously, considering a demand for cloud resources. For the reason, we surveyed relevant cases, and then analyzed needs and requirements from AEC industry. Based on the relevant cases, customizing for cloud BIM and design for the development was performed. We also surveyed any related-law to support cloud computing-based BIM service. Finally, we proposed herein how to optimally design and develop the usage metering functions of cloud BIM software.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.4
• /
• pp.231-237
• /
• 2018

In this study, two important requirements for the home production of a robot to detect and remove improvised explosive devices (IEDs) are presented in terms of the total cost for robot system development and the performance improvement of the mine detection technology. Firstly, cost analyses were performed in order to provide a reasonable solution following an engineering estimate method. As a result, the total cost for a mass production system without the mine detection system was estimated to be approximately 396 million won. For the case including the mine detection system, the total cost was estimated to be approximately 411 million won, in which labor costs and overhead charges were slightly increased and the material costs for the mine detection system were negligible. Secondly, a method for fabricating the carbon nanotube (CNT) based gas detection sensor was studied. The detection electrodes were formed by a photolithography process using a photosensitive CNT paste. As a result, this method was shown to be a scalable and expandable technology for producing excellent mine detection sensors. In particular, it was found that surface treatments by using adhesive taping or ion beam bombardment methods are effective for exposing the CNTs to the ambient air environment. Fowler-Nordheim (F-N) plots were obtained from the electron-emission characteristics of the surface treated CNT paste. The F-N plot suggests that sufficient electrons are available for transport between CNT surfaces and chemical molecules, which will make an effective chemiresistive sensor for the advanced IED detection system.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.33-41
• /
• 2019

The purpose of this study is to provide a basic data for energy efficient apartment designs by analyzing electricity and gas usage according to horizontal locations of dwelling units in apartment buildings. The data for this research are collected from J-apartment complex, located at 'Wolbae' district in Daegu City. The data are sorted into several groups according to inner and outer locations, East-West locations, and the size of units. By the performance efficiency analysis, the study derives the result as follows: 1) generally inner units are more efficient than outer units. 2) West units are more efficient than East units. 3) The group that is most efficient in overall energy consumption is West-inner units (Group-D) and the least efficient group is East-outer units (Group-A1). 4) However, as units are getting bigger, inner units consumes more energy than outer units because of the gas usage patterns. The study also established cost analysis that shows the cost differences of usages for 30, 40, 50 years between each group. The result says Inner-outer location with East-West location affects a significant amount of the management costs. In terms of economic and social life of an apartment building, energy design standards need to be tuned and make the least efficient units perform as efficient as the most efficient units to optimize the social life of an apartment building.